-
-
send us mail
[email protected]
Both specifications i.e. ASTM A860, as well as MSS SP 75, are standards for factory produced butt welded fittings. These ASTM A860 WPHY 65 Fittings are particularly well suited to be used in the transmission of various media like steam, gas, water and oil across refineries to off and onshore sites. Regularly associated as a part of high pressure category fittings, the Carbon Steel Gr A860 WPHY 65 Elbow could be used to change the direction of the flow of different media, generally at an angle of either 22.5 degrees, 45 degrees or 90 degrees. Unless the elbow was custom made to another angle in order to meet the requirements of the application. Typically, the material used in the construction of ASTM A865 MSS SP 75 WPHY 65 Pipe Fittings could be low alloyed steel with the type of construction being either seamless or welded. The term WPHY was shortened from Wrought plate or pipe high yield fittings. Therefore the minimum yield strength of a CS ASTM A860 WPHY 65 Stub End would be about 65000 PSI.
ASTM A860 WPHY 65 Fittings
Carbon Steel Gr A860 WPHY 65 Elbow
Buttweld A860 WPHY 65 Reducer
The number mentioned after WPHY would be indicative of its minimum yield strength in 000’s PSI.
Pipe fittings like the Buttweld A860 WPHY 65 Reducer that have been manufactured in accordance with either specification i.e. MSS SP 75 or ASTM A860 need to be furnished in the heat treated condition. Fittings that have been hot formed are mandated to be cooled below the lower critical temperature before being given heat treatment. Fittings like the CS A860 Grade WPHY 65 Pipe Cap are usually heat treated by one or more of the following procedures i.e. annealing or stress relieving, normalizing, normalizing and tempering as well as quenching and tempering.
| Standard Specification : | ASTM A860 WPHY 65 Fittings |
| Rating Pressure: | Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS |
| Check Sizes: | (SMLS UPTO 24”) 1/2” TO 36” (Buttweld 8” TO 36” ) |
| Standard: | ANSI B16.28 Fittings, JIS B2313 Fittings, ANSI B16.9 Fittings, MSS-SP-43 Type b Fittings, MSS-SP-43 Type A Fittings, JIS B2312 Fittings, MSS-SP-43 Type B Fittings |
| Fitting Machining Equipment: | Electric bevelling machine, Sand-blasting machine, Press machine, Bending machine, Pushing Machine etc |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Thickness: | View Our Thickness: Sch5S, Sch10, Sch20, Sch10, Sch20, Sch30, SchTD, Sch40, Sch60, XS, Sch80, Sch100, Sch120, Sch140, Sch160. |
| Coating Fitting Faces : | Cold and Hot Dip Galvanized, Anti-rust Paint, Zinc Plated, Oil Black Paint, Yellow Transparent |
| Application: | Water Pipeline Industry Natural Gas Industry Oil And Gas Industry Fabrication Industry Nuclear Power Plant Chemical Industry |
| Grade | C | Mn | S | P | Si | Ni | Cr | Mo | Cu | Ti | V | Cb | Al |
| ASTM A860 WPHY 65 | 0.20 | 1.00-1.45 | 0.03 | 0.01 | 0.15-0.40 | 0.50 | 0.30 | 0.25 | 0.35 | 0.05 | 0.10 | 0.06 |
| Element | Elongation | Tensile Strength | Yield Strength (0.2%Offset) |
| a860 WPHY 65 | 28 % | 515-690 | 415 |
A860 Carbon Steel-65 Equal Tee
A860 Gr WPHY 65 180 Deg Elbow
A860 Gr 65 BW Cross Fitting
MSS SP 75 WPHY 65 Material
Carbon Steel A860 65 Weld Lateral Tee
High Yield Carbon Steel A860 65 End Cap
ASTM A860 Carbon Steel WPHY 65 Reducing Tee
ASTM A860 High Yield Gr 65 Stub Ends
Buttweld WPHY-65 Concentric Reducer
MSS SP 75 WPHY 65 Eccentric Reducer
ASTM A860 Gr 65 45 Degree Elbow
Carbon Steel MSS SP75 65 90 Deg Elbow
3.ASTM A860 MSS SP 75 65 Reducer
WT: sch40/ std/ sch80/ thick-wall
Carbon Steel Grade WPHY 65 Pipe Concentric
A860 WPHY 65 Eccentric Reducer
MSS SP 75 A860 WPHY 65 Con/ Ecc Reducer
4. Buttweld-WPHY 65 SMLS CAP
MSS SP 75 WPHY 65 cap
Cap Pipe fittings
5. A860 Carbon Steel-WPHY 65 Stubend
A860 Gr WPHY 65 60 Stubend
these Material ASTM A860 Buttweld are known for accurate dimension, corrosion resistance and durability.
A860 Gr WPHY 65 Short Stubend
A860 Gr WPHY 65 BW Long Stubend
ASTM A860 API 5L X65 elbow manufacturer