-
-
send us mail
[email protected]
Apart from its inherently good looking colour, the Copper Fittings are used almost exclusively for plumbing applications due to its superior corrosion resistance properties, good machinability in addition to a high level of heat transfer.
As water infrastructure is used across any area ages, there are changes noted in the quality of water, changes in water treatment practices as well as in water infrastructure maintenance. These changes pose increasingly difficult challenges on municipalities, water suppliers, and residents. Copper is the only material that is well suited to be used for service line piping systems. The material used to make Copper Plumbing Fittings has a proven history of reliability, safety, longevity, and life-cycle cost effectiveness. These are properties present in the Copper Pipe Fittings are required to meet the challenges required in these infrastructure decisions.
Copper is a material that offers many attractive properties to its users.
| Pressure Rating (psig) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPS (inch) |
Pipe Sch. | OD (inch) |
Wall Thick. (in) |
Temperature (oF) | ||||||||
| Copper 100 Fittings | Copper 200 Fittings | Copper 300 Fittings | Copper 400 Fittings | Copper 500 Fittings | Copper 600 Fittings | |||||||
| Allowable Stress (Pressure Rating) | ||||||||||||
| 16700 | 16700 | 16700 | 15500 | 14400 | 13500 | |||||||
| 1" | 40 | 1.315 | 0.133 | 2205 | 2205 | 2205 | 2047 | 1902 | 1783 | |||
| 80 | 1.315 | 0.179 | 3061 | 3061 | 3061 | 2841 | 2640 | 2475 | ||||
| 160 | 1.315 | 0.250 | 4493 | 4493 | 4493 | 4170 | 3874 | 3632 | ||||
| 1 1/2" | 40 | 1.900 | 0.145 | 1629 | 1629 | 1629 | 1512 | 1404 | 1317 | |||
| 80 | 1.900 | 0.200 | 2303 | 2303 | 2303 | 2138 | 1986 | 1862 | ||||
| 160 | 1.900 | 0.281 | 3362 | 3362 | 3362 | 3120 | 2899 | 2717 | ||||
| 2" | 40 | 2.375 | 0.154 | 1371 | 1371 | 1371 | 1272 | 1182 | 1108 | |||
| 80 | 2.375 | 0.218 | 1985 | 1985 | 1985 | 1843 | 1712 | 1605 | ||||
| 160 | 2.375 | 0.344 | 3283 | 3283 | 3283 | 3047 | 2831 | 2654 | ||||
| 3" | 40 | 3.500 | 0.216 | 1301 | 1301 | 1301 | 1208 | 1122 | 1052 | |||
| 80 | 3.500 | 0.300 | 1844 | 1844 | 1844 | 1712 | 1590 | 1491 | ||||
| 160 | 3.500 | 0.438 | 2787 | 2787 | 2787 | 2587 | 2403 | 2253 | ||||
| 4" | 40 | 4.500 | 0.237 | 1102 | 1102 | 1102 | 1023 | 950 | 891 | |||
| 80 | 4.500 | 0.337 | 1596 | 1596 | 1596 | 1482 | 1377 | 1291 | ||||
| 160 | 4.500 | 0.531 | 2611 | 2611 | 2611 | 2424 | 2552 | 2111 | ||||
| 5" | 40 | 5.563 | 0.258 | 965 | 965 | 965 | 896 | 832 | 780 | |||
| 80 | 5.563 | 0.375 | 1428 | 1428 | 1428 | 1325 | 1231 | 1154 | ||||
| 160 | 5.563 | 0.625 | 2474 | 2474 | 2474 | 2296 | 2133 | 2000 | ||||
| 6" | 40 | 6.625 | 0.280 | 877 | 877 | 877 | 814 | 756 | 709 | |||
| 80 | 6.625 | 0.432 | 1379 | 1379 | 1379 | 1280 | 1189 | 1115 | ||||
| 160 | 6.625 | 0.719 | 2382 | 2382 | 2382 | 2211 | 2054 | 1925 | ||||
| 8" | 40 | 8.625 | 0.322 | 771 | 771 | 771 | 716 | 665 | 623 | |||
| 80 | 8.625 | 0.500 | 1218 | 1218 | 1218 | 1131 | 1050 | 985 | ||||
| 160 | 8.625 | 0.906 | 2298 | 2298 | 2298 | 2133 | 1982 | 1858 | ||||
| 10" | 40 | 10.750 | 0.365 | 699 | 699 | 699 | 649 | 603 | 565 | |||
| 80 | 10.750 | 0.594 | 1159 | 1159 | 1159 | 1075 | 999 | 937 | ||||
| 160 | 10.750 | 1.125 | 2289 | 2289 | 2289 | 2124 | 1974 | 1850 | ||||
Along with being used in plumbing systems, the Buttweld Copper Pipe End Fittings is used in the chemical, oil, process based and marine industries. A compression fitting is a component that could be used in plumbing or in electrical conduit systems in order to join two tubes or two thin walled pipes together. A benefit of using these Copper Compression Fittings is that they permit ease in both disconnection and reconnection of the piping system.
Grooved pipe fitting are typically used to forge connections in both wet and dry piping systems. Referred to mostly as Victaulic style pipe fitting, the Forged Copper Grooved Fittings offer some form of flexibility in terms of movement as well as some deflection to the piping system.
| Standard | Copper NO. | Chemical Composition | Mechanical Properties | ||||
|---|---|---|---|---|---|---|---|
| CU% | P% | Temper | Tensile strength (Mpa) | Elongation (%) | Average Grain Size (mm) | ||
| ASTM B280/68 |
C12200 | >99.9 | 0.015 to 0.040 | >60 | >205 | >40 | >0.040 |
| >50 | >245 | ||||||
| Standard Specification : | Copper Fittings |
| Standard: | JIS B2313 Fittings, ANSI B16.9 Fittings, ANSI B16.28 Fittings, MSS-SP-43 Type A Fittings, MSS-SP-43 Type B Fittings, JIS B2312 Fittings, MSS-SP-43 Type b Fittings |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Application: | Chemical Industry Water Pipeline Industry Nuclear Power Plant Natural Gas Industry Fabrication Industry Oil And Gas Industry |
| Rating Pressure: | Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS |
| Check Sizes: | (SMLS UPTO 24”) 1/2” TO 36” (Buttweld 8” TO 36” ) |
| Thickness: | View Our Thickness: Schedule 5S, SCH10, SCH20, SCH10, SCH20, SCH30, SCHTD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160. |
| Coating Fitting Faces : | Oil Black Paint, Zinc Plated, Cold and Hot Dip Galvanized, Yellow Transparent, Anti-rust Paint |
| Fitting Machining Equipment: | Electric bevelling machine, Press machine, Bending machine, Pushing Machine, Sand-blasting machine etc |
Copper Tee
Copper End Cap
Copper Elbow
Copper Reducer
Copper Threaded Plug
Copper Stub End
Copper Socket Weld Union
Copper Cross
Copper Lateral Tee
Copper U Bend
| BS EN NUMBER | TITLE | NEAREST OLD BS EQUIVALENT |
|---|---|---|
| Copper Fitting | ||
| 12420 Pt 1-5 | Plumbing fitting | 864 |
| prEN1254 Pt 6-7 | Plumbing fitting | - |
| 12420 | Forgings | 2872 |
| prEN14905 | Recommended practice for the installation of plumbing fitting | - |