-
-
send us mail
[email protected]
During forging, the components, which in this case is Carbon Steel Forged Fittings have a directional grain flow. This refining and directional grain flow are what not only improves their mechanical properties but also the metallurgical properties of CS Forged Elbow tend to be much better as opposed to any other process. In fact, the structural integrity of a forged component could not be beaten by any other transformation process. This is because unlike the other transformational process, forging is known to remove porosities, gases and internal cavities from the material used in the manufacture of Forged Carbon Steel Fittings. Therefore, the absence of porosity or gases is what prevents unexpected faults under stress, fatigue and impact. Forging the Forged Carbon Steel Equal Tee also reduces the weight required to manufacture the piece, leading to a significant saving in terms of its cost.
Carbon Steel Forged Fittings
CS Forged Elbow
Forged Carbon Steel Pipe Fittings
Similar to most alloys, Carbon Steel Forged Fittings demonstrates an improvement in certain properties.
Furthermore, the Carbon Steel Threaded Coupling would have less excess, thus these fittings would require less machining hours as well as less material to be used in order to clean the fittings at the end. Through a minimal or reduced use of material excesses, it is realizable to guarantee an optimization in costs; while providing the CS Forged Threaded Pipe Nipples with the appropriate tolerances that always guarantees that the fittings remain clean at final measurements.
| Specification : | Carbon Steel Forged Fittings |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Pressure: | Check Pressure Rating Of Socket, Threaded: 3000 LBS, 6000 LBS, 9000 LBS |
| Connection Type : | Welding |
| Size Chart Of: | 1/8” NB to 4” NB (NPT-SW Fittings) |
| Forged Type : | NPT (Threaded), BSPT, BSPP. |
| Standard Of: | ASME B16.25 Fittings, MSS SP-75 Fittings, DIN2605 Fittings, JISB2312 Fittings, PN Fittings, AWWA C207 Fittings, BS4504 Fittings, BS1560 Fittings, BS Fittings, GB Fittings, ISO Fittings, JISB2311 Fittings, IS 2062 Fittings, DIN Fittings, ANSI B16.28 Fittings, ASME B16.9 Fittings, BS10 Fittings, ASME B16.47 Fittings, ASME B16.38 Fittings, MSS-SP-43 Fittings, JISB2313 Fittings |
Low Carbon Steel Forged 45 Deg Elbows
High Carbon Steel Forged 90 Deg Elbows
Quenching Carbon Steel Forged Cap
Plain Carbon Steel Forged SW Tee
Killed Carbon Steel Forged Half Coupling
Galvanised Carbon Steel Forged Threaded Union
Galvanized Carbon Steel Forged Hex Plug
Fully Killed Carbon Steel Forged Street Elbow
Black Carbon Steel Forged Full Coupling
Medium Carbon Steel Socket Weld Cross
High Carbon Steel Forged Pipe Nipple
| Element | Composition %, Note C |
|---|---|
| Carbon | .35 max |
| Manganese | .60-1.05 |
| Phosphorus | .035 max |
| Sulfur | .040 max |
| Silicon | .10-35 |
| Copper | .40 max, note A |
| Nickel | .40 max, note A |
| Chromium | .30 max, note A,B |
| Molybdenum | .12 max, note A,B |
| Vanadium | .08 max, note A |
|
Property |
|
|---|---|
|
Tensile Strength, min: |
70,000 psi (485 MPa] |
|
Min. Yield Point: |
36,000 psi [250 MPa] |
|
Reduction of area, min: |
30% min |
|
Hardness, HB, max |
187 |
| Fitting Class | Fitting Connection | Pipe Equivalent | |
|---|---|---|---|
| Schedule No. | Wall Designation | ||
|
2000
|
NPT
|
Sch. 80
|
XS
|
|
3000
|
NPT
|
Sch. 160
|
–
|
|
6000
|
NPT
|
–
|
XXS
|
|
3000
|
SW
|
Sch. 80
|
XS
|
|
6000
|
SW
|
Sch. 160
|
–
|
|
9000
|
SW
|
–
|
XXS
|
| Fittings | Size | |
|---|---|---|
| Carbon Steel Forged 90° Elbows | Carbon Steel Socket Couplings | Sizes 1/8″ – 4″ Fittings Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Carbon Steel NPT 45° Elbows | Carbon Steel Threaded Reducers | |
| Carbon Steel Forged Street Elbows | Carbon Steel SW Inserts | |
| Carbon Steel Threaded Tees | Carbon Steel Forged Caps | |
| Carbon Steel Socket Crosses | Carbon Steel NPT Unions | |