-
-
send us mail
[email protected]
Hence, using ASTM A860 WPHY 56 Fittings would ensure longevity and good performance. WPHY fittings are referred to as Wrought plate or pipe high yield fittings. These high yield fittings are made in specific grades. The grade would indicate its minimum yield strength in PSI. Therefore the minimum yield strength of Buttweld A860 Gr WPHY 56 Material is valued at 56000 PSI.
The material used in the production of these Carbon Steel WPHY 56 Elbow fittings i.e. low alloy steels like carbon steel is required to be heat treated by quenching, normalizing, and tempering or stress relieving. The construction method of SA860 WPHY 56 Cross could be either seamless or by welding.
ASTM A860 WPHY 56 Fittings
ASME B16.11 Carbon Steel WPHY 56 Elbow
Buttweld A860 Gr WPHY 56 Material
The equipment used in the oil and gas industry including pipes, fittings, flanges is required to be sturdy as they are high pressured environments.
The radius of curvature in a Carbon Steel WPHY 56 Long Radius Bend is about 1.5 times its nominal diameter. In a traditional elbow fitting the radius of curvature is usually one time the nominal diameter of the pipe. In comparison to a short elbow, a long radius elbow provides less frictional resistance to the fluid. It is required that the ASTM A860 WPHY 56 Buttweld Fittings conform to the mechanical properties like yield strength, tensile strength as well as elongation, notch toughness, and hardness.
| Standard Specification : | ASTM A860 WPHY 56 Fittings |
| Thickness: | View Our Thickness: Sch5S, Sch10, Sch20, Sch10, Sch20, Sch30, SchTD, Sch40, Sch60, XS, Sch80, Sch100, Sch120, Sch140, Sch160. |
| Coating Fitting Faces : | Cold and Hot Dip Galvanized, Anti-rust Paint, Zinc Plated, Oil Black Paint, Yellow Transparent |
| Fitting Machining Equipment: | Electric bevelling machine, Sand-blasting machine, Press machine, Bending machine, Pushing Machine etc |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Rating Pressure: | Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS |
| Check Sizes: | (SMLS UPTO 24”) 1/2” TO 36” (Buttweld 8” TO 36” ) |
| Standard: | JIS B2313 Fittings, ANSI B16.9 Fittings, MSS-SP-43 Type b Fittings, MSS-SP-43 Type A Fittings, JIS B2312 Fittings, ANSI B16.28 Fittings, MSS-SP-43 Type B Fittings |
| Application: | Water Pipeline Industry Oil And Gas Industry Natural Gas Industry Fabrication Industry Nuclear Power Plant Chemical Industry |
A860 Carbon Steel WPHY-56 Equal Tee
A860 Gr WPHY 56 180 Deg Elbow
WPHY 56 BW Cross Fitting
MSS SP 75 56 Material
Carbon Steel A860 56 Weld Lateral Tee
High Yield Carbon Steel A860 WPHY 56 End Cap
ASTM A860 Carbon Steel 56 Reducing Tee
ASTM A860 High Yield Gr 56 Stub Ends
Buttweld WPHY-56 Concentric Reducer
MSS SP 75 WPHY 56 Eccentric Reducer
ASTM A860 Gr 56 45 Degree Elbow
Carbon Steel MSS SP75 56 90 Deg Elbow
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu | Ti | V | Cb | Al | |
| ASTM A860 WPHY 56 | 0.20 | 1.00-1.45 | 0.03 | 0.01 | 0.15-0.40 | 0.50 | 0.30 | 0.25 | 0.35 | 0.05 | 0.10 | 0.04 | 0.06 |
Tensile Strength (mpa) |
Yield Strength (mpa) |
|
A860 Gr WPHY 56 |
390 |
490 |
5. A860 Carbon Steel-WPHY 56 Stubend
A860 Carbon Steel WPHY 56 Stubend
these Material ASTM AWPHY 560 WPL6 Buttweld are known for accurate dimension, corrosion resistance and durability.
A860 Gr WPHY 56 Short Stubend
A860 CS WPHY 56 BW Long Stubend
ASTM A860 API 5L X56 elbow manufacturer
2. Carbon Steel MSS SP75 56 Tee
Carbon Steel A860 WPHY 56 Weld Reducing Tee
High Yield Carbon Steel A860 WPHY 56 Tee
3.ASTM A860 MSS SP 75 56 Reducer
WT: sch40/ std/ sch80/ thick-wall
Carbon Steel Grade WPHY 56 Pipe Concentric
A860 WPHY 56 Eccentric Reducer
MSS SP 75 A860 WPHY 56 Con/ Ecc Reducer
4. Buttweld-WPHY 56 SMLS CAP
MSS SP 75 WPHY 56 cap
Cap Pipe fittings