-
-
send us mail
[email protected]
Inconel 600 Pipe Fittings exhibit good oxidation resistance properties at higher temperatures. Moreover, Inconel 600 is an alloy that has good resistance in carburizing and chloride containing environments as well. The various kinds of Alloy 600 Buttweld Fittings are caps, tees, elbows, bends, reducers, lap-joint, and stub ends. Similar to most fitting, the general purpose of these fitting is to change the direction of the flow while performing other secondary operations. For instance, using a Werkstoff No. 2.4816 Inconel 600 Elbow would work towards changing the direction of a media at an angle of either 22.5, 45 or 90 degrees, but if the flow is to be reduced, a reducer elbow would aid in performing this operation.
Fitting produced from Inconel 600, a nickel based alloy are covered under specification ASTM B366.
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Generally, both a chemical analysis and product analysis is to be carried out on the ASTM B366 UNS N06600 Fittings is required to conform to the prescribed chemical composition of the specification in addition to its tensile properties, tension test, heat treatment, and dimensions. A perk of using the Alloy 600 Forged Fittings is that they are designed for use in cryogenic temperature settings up to elevated temperatures in the range of 2000 deg F. In addition to improving its use in elevated temperature settings, nickel added in the alloy of Inconel 600 Pipe Fitting is also responsible for superior corrosion resistance against chloride ion stress related corrosion cracking along with several organic and inorganic compounds as well as excellent resistance to alkaline solutions.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
| Standard Specification : | Inconel 600 Pipe Fittings |
| Coating Fitting Faces : | Cold and Hot Dip Galvanized, Zinc Plated, Yellow Transparent, Oil Black Paint, Anti-rust Paint |
| Fitting Machining Equipment: | Press machine, electric bevelling machine, Bending machine, Pushing Machine, Sand-blasting machine etc |
| Rating Pressure: | Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS |
| Check Sizes: | (SMLS UPTO 24”) 1/2” TO 36” (Buttweld 8” TO 36” ) |
| Thickness: | View Our Thickness: Schedule 5S, SCH10, SCH20, SCH10, SCH20, SCH30, SCHTD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160. |
| Standard: | MSS-SP-43 Type B Fittings, ANSI B16.28 Fittings, JIS B2312 Fittings, JIS B2313 Fittings, ANSI B16.9 Fittings, MSS-SP-43 Type A Fittings, MSS-SP-43 Type b Fittings |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Application: | Fabrication Industry Natural Gas Industry Nuclear Power Plant Chemical Industry Water Pipeline Industry Oil And Gas Industry |
| Inconel 600 Pipe Fittings Pressure Rating | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPS (inch) |
Pipe Sch. | OD (inch) |
Wall Thick. (in) |
Temperature (oF) | ||||||||
| 100 | 200 | 300 | 400 | 500 | 600 | |||||||
| Allowable Stress (Pressure Rating) | ||||||||||||
| 16700 | 16700 | 16700 | 15500 | 14400 | 13500 | |||||||
| 1" | 40 | 1.315 | 0.133 | 2205 | 2205 | 2205 | 2047 | 1902 | 1783 | |||
| 80 | 1.315 | 0.179 | 3061 | 3061 | 3061 | 2841 | 2640 | 2475 | ||||
| 160 | 1.315 | 0.250 | 4493 | 4493 | 4493 | 4170 | 3874 | 3632 | ||||
| 1 1/2" | 40 | 1.900 | 0.145 | 1629 | 1629 | 1629 | 1512 | 1404 | 1317 | |||
| 80 | 1.900 | 0.200 | 2303 | 2303 | 2303 | 2138 | 1986 | 1862 | ||||
| 160 | 1.900 | 0.281 | 3362 | 3362 | 3362 | 3120 | 2899 | 2717 | ||||
| 2" | 40 | 2.375 | 0.154 | 1371 | 1371 | 1371 | 1272 | 1182 | 1108 | |||
| 80 | 2.375 | 0.218 | 1985 | 1985 | 1985 | 1843 | 1712 | 1605 | ||||
| 160 | 2.375 | 0.344 | 3283 | 3283 | 3283 | 3047 | 2831 | 2654 | ||||
| 3" | 40 | 3.500 | 0.216 | 1301 | 1301 | 1301 | 1208 | 1122 | 1052 | |||
| 80 | 3.500 | 0.300 | 1844 | 1844 | 1844 | 1712 | 1590 | 1491 | ||||
| 160 | 3.500 | 0.438 | 2787 | 2787 | 2787 | 2587 | 2403 | 2253 | ||||
| 4" | 40 | 4.500 | 0.237 | 1102 | 1102 | 1102 | 1023 | 950 | 891 | |||
| 80 | 4.500 | 0.337 | 1596 | 1596 | 1596 | 1482 | 1377 | 1291 | ||||
| 160 | 4.500 | 0.531 | 2611 | 2611 | 2611 | 2424 | 2552 | 2111 | ||||
| 5" | 40 | 5.563 | 0.258 | 965 | 965 | 965 | 896 | 832 | 780 | |||
| 80 | 5.563 | 0.375 | 1428 | 1428 | 1428 | 1325 | 1231 | 1154 | ||||
| 160 | 5.563 | 0.625 | 2474 | 2474 | 2474 | 2296 | 2133 | 2000 | ||||
| 6" | 40 | 6.625 | 0.280 | 877 | 877 | 877 | 814 | 756 | 709 | |||
| 80 | 6.625 | 0.432 | 1379 | 1379 | 1379 | 1280 | 1189 | 1115 | ||||
| 160 | 6.625 | 0.719 | 2382 | 2382 | 2382 | 2211 | 2054 | 1925 | ||||
| 8" | 40 | 8.625 | 0.322 | 771 | 771 | 771 | 716 | 665 | 623 | |||
| 80 | 8.625 | 0.500 | 1218 | 1218 | 1218 | 1131 | 1050 | 985 | ||||
| 160 | 8.625 | 0.906 | 2298 | 2298 | 2298 | 2133 | 1982 | 1858 | ||||
| 10" | 40 | 10.750 | 0.365 | 699 | 699 | 699 | 649 | 603 | 565 | |||
| 80 | 10.750 | 0.594 | 1159 | 1159 | 1159 | 1075 | 999 | 937 | ||||
| 160 | 10.750 | 1.125 | 2289 | 2289 | 2289 | 2124 | 1974 | 1850 | ||||
Inconel 600 Stub End
Inconel 600 Threaded Plug
Inconel 600 Socket Weld Union
Inconel 600 Cross
Inconel 600 Elbow
Inconel 600 Tee
Inconel 600 Reducer
Inconel 600 End Cap
Inconel 600 U Bend
Inconel 600 Lateral Tee
| Density | lb/in³ | 0.305 |
|---|---|---|
| Mg/m³ | 8.44 | |
| Specific Heat | Btu/lb°F (J/kg°C) | 0.106 |
| J/kg-°C | 444 | |
| Melting Range | °F | 2470-2575 |
| °C | 1354-1413 | |
| Electrical Resistivity | ohm-circ mil/ft | 620 |
| μΩ-m | 1.03 | |
| Curie Temperature | °F | -192 |
| °C | -124 | |
| Permeability | 200 oersted (15.9 kA/m) | 1.01 |