-
-
send us mail
[email protected]
Titanium Fittings tend to be resistant to corrosion in media such as seawater, aqua regia, as well as chlorine containing solutions. Since titanium has a high strength to weight ratio these Ti. Alloy Pipe Elbow is used across a wide range of industries.
Primarily, Titanium Compression Fittings are used in plumbing and electrical conduit systems in order to join two tubes or two pipes that have thin walls together. This kind of fitting often has ferrules in them, which makes it easier to be attached to pipes. The benefit of using compression type of fitting is that they are well suited to applications that are located in confined spaces where using soldering to connect two pipes could result in a fire hazard. In addition, titanium compression fitting also permit for ease in disconnection and reconnection. Titanium Grade 2 Forged Fittings tend to be produced thicker and heavier for the intention of being used for heavy industrial applications.
Titanium is lightweight, has a high strength mechanical strength and is a corrosion resistant material.
| STANDARD | UNS | WERKSTOFF NR. |
| Titanium Gr 2 Fitting | R50400 | 3.7035 |
| Standard Specification : | Titanium Fittings |
| Thickness: | View Our Thickness: Schedule 5S, SCH10, SCH20, SCH10, SCH20, SCH30, SCHTD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160. |
| Standard: | MSS-SP-43 Type A Fittings, MSS-SP-43 Type B Fittings, JIS B2313 Fittings, ANSI B16.9 Fittings, ANSI B16.28 Fittings, JIS B2312 Fittings, MSS-SP-43 Type b Fittings |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Application: | Chemical Industry Water Pipeline Industry Nuclear Power Plant Natural Gas Industry Fabrication Industry Oil And Gas Industry |
| Coating Fitting Faces : | Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent, Zinc Plated, Anti-rust Paint |
| Fitting Machining Equipment: | Press machine, electric bevelling machine, Bending machine, Pushing Machine, Sand-blasting machine etc |
| Rating Pressure: | Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS |
| Check Sizes: | (SMLS UPTO 24”) 1/2” TO 36” (Buttweld 8” TO 36” ) |
Titanium NPT Fittings prove to be an effective seal for pipes in systems that convey hydraulic fluids. The term NPT is referred to as National Pipe Tapered threads. However, in order to ensure a leak-free seal, a sealant compound or PTFE, which is also known as Polytetrafluoroethylene tape is to be used. Titanium Buttweld Fitting are a kind of weldable pipe fitting that permits the worker to change the direction of flow or to branch off, reduce pipe size or even attach auxiliary equipment.
| Gr. | Specification (mm) | Standard |
|---|---|---|
| Gr2 (Pure Titanium)
Gr5 (Ti6Al4V) |
M (3-64) *L (5-300) or as your request |
GB DIN ASTM ASME ISO JIS |
| M (3-64) *L (5-300) or as your request |
||
| M (3-64) or as your request |
||
| M (3-64) or as your request |
Titanium Reducer
Titanium Tee
Titanium End Cap
Titanium Elbow
Titanium Stub End
Titanium Threaded Plug
Titanium Socket Weld Union
Titanium Cross
Titanium U Bend
Titanium Lateral Tee
| Titanium Gr 2 | C | Ti | N | Fe | H | O | V | Al |
| 0.1 maximum | 99.2 min. | 0.03 maximum | 0.3 maximum | 0.015 maximum | 0.25 maximum | – | – |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |