AWWA C207 Flange, Steel Class D Slip On, E Blind Flange, B Hub Flange

Check AWWA C207 Blind Flange Dimension, Buy AWWA C207 Steel Pipe Flanges Standard At Low Price In India.

The AWWA C207 is a standard that describes ring-type slip-on flanges and blind flanges. Pressure ratings are a mandate for conditions as well as for temperatures pertaining to slurry, waterworks, waste water, plant piping or other light duty applications. The pressure ratings for the AWWA C207 Flanges are to be based on the design of the maximum operating pressure along with an anticipated surge pressure. The design of the Flange is based on pressure considerations, not for stresses or load that has been induced by external moments where the pipe acts as a beam. AWWA C207 Steel Pipe Flanges produced in accordance with this standard are intended for use in amalgamation with steel pipe, fittings, or appurtenances. These components, in turn, meet the requirements of either ANSI/AWWA C200, ANSI/AWWA C208, or other equivalent standards.

AWWA C207 Flanges Standard

AWWA C207 Class D Flange

AWWA C207 Class B Flanges

What Is AWWA C207 Flanges?
Awwa C207 Flange Dimensions In Inch
Awwa C207 Flange Material Specification
Types Of Awwa C207 Steel Pipe Flanges
Awwa C207 Class B Blind Flange (86 psi*)
Awwa C207 Class D Slip On Flange (175-150 psi*)
Awwa C207 Class D Hub Flange (175-150 psi*)
Awwa C207 E Ring Blind Flange (275 psi*)
Awwa C207 Class E Hub Flange (275 psi*)
Awwa C207 Class F Ring Flange (300 psi*)

Test pressures for the AWWA C207 Blind Flange Dimensions are not to exceed 125 per cent of the ratings.

Stainless Steel AWWA C207 Class D Flange Manufacturers In india, Check AWWA C207 Class E Flange Specification, Pressure Rating Of Awwa C207 Flange Material.

What Is AWWA C207 Flanges?

The Stainless Steel AWWA C207 Class D Flange is well suited for use in the following pressure ratings: For sizes between 4 inches to 12 inches, the pressure rating is approx 175 psi, whereas, for sizes that are greater than 12 inches, the pressure rating would be about 150 psi. On the other hand, AWWA C207 Class E Flange delivers good performance at pressure ratings up to and including 275 psi. Although this standard does not specify certain steel grades, the Awwa C207 Flange Material establishes a set of minimum physical and chemical properties.

Awwa C207 Flange Dimensions In Inch

Awwa C207 Flange Material Specification

Specification :	AWWA C207 Flanges
Production Process:	Forged, Heat Treated and Machined
Standard :	MSS SP44 Flange, EN-1092 Flange, BS10 Flange, ASME B16.38 Flange, ISO Flange, JIS Flange, ASME B16.47 (Series A, Series B) Flange, UNI Flange, PN Flange, ASME B16.5 Flange, AWWAS Flange, DIN Flange, GOST Flange
Machining Equipment:	Press machine, Pushing Machine, Electric bevelling machine, Bending machine, Sand-blasting machine etc
Application:	Water Pipeline Industry Fabrication Industry Chemical Industry Natural Gas Industry Nuclear Power Plant Oil And Gas Industry
Supporting Flange Material:	Flange Bolts, Gasket, Ring Joint
Connect Type Type:	LMF, RF, RTJ, SMF, LJF, FF
Coating Flange Faces :	Cold and Hot Dip Galvanized, Anti-rust Paint, Zinc Plated, Oil Black Paint, Yellow Transparent
Design For Size:	ASA, PN, JIS, DIN, BS, ANSI, ASME, EN
Common Types of Flanges Dimensions:	Class 150 RTJ Flanges 300 LB WNRF Class 900 SORF 1500# BLRF Class 2500 BLRF
Pressure Rating Table:	Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS
Size Chart :	1/2″ (15 NB) To 48″ (1200NB)

A Reliable Awwa C207 Blind Flange supplier in Nagpur, Buy Copper AWWA C207 Flange Certified Material, Get instant delivery Of Carbon Steel Awwas C207 Class B Flanges, Visit our Awwa C207 Class D Slip On Flanges Mill in India.

Types Of Awwa C207 Steel Pipe Flanges

Awwa C207 Class B Flange

Awwa C207 Steel Pipe Flange

Awwa C207 Class D Ring Flanges

Blind Flange Awwa C207 Class D

Awwas C207 Class E Hub Flange

Stainless Steel Awwa C207 Flange

Carbon Steel Awwa C207 Flange

Slip On Awwas C207 Class E Flange

Awwas C207 Class D Ring Flange

Tabela De Flanges Awwas C207

Flanges Norma Awwas C207

Awwas C207 Blind Flange

Awwa C207 Class B Blind Flange (86 psi*)

NPS		Thick.			Drilling			Weight
	OD	Slip-On	Blind	Bore	Bolt Circle	Hole Dia	Number Holes	Slip-on	Blind
	A	T	T	B	C
4	9.00	0.625	0.625	4.57	7.50	0.750	8	8	11
5	10.00	0.625	0.625	5.66	8.50	0.875	8	9	14
6	11.00	0.688	0.688	6.72	9.50	0.875	8	11	19
8	13.50	0.688	0.688	8.72	11.75	0.875	8	15	28
10	16.00	0.688	0.688	10.88	14.25	1.000	12	19	39
12	19.00	0.688	0.719	12.88	17.00	1.000	12	28	58
14	21.00	0.688	0.791	14.19	18.75	1.125	12	34	78
16	23.50	0.688	0.892	16.19	21.25	1.125	16	41	110
18	25.00	0.688	0.950	18.19	22.75	1.250	16	41	132
20	27.50	0.688	1.040	20.19	25.00	1.250	20	49	175
22	29.50	0.750	1.132	22.19	27.25	1.375	20	57	219
24	32.00	0.750	1.216	24.19	29.50	1.375	20	67	277
26	34.25	0.812	1.307	26.19	31.75	1.375	24	80	341
28	36.50	0.875	1.398	28.19	34.00	1.375	28	94	414
30	38.75	0.875	1.477	30.19	36.00	1.375	28	105	493
32	41.75	0.936	1.581	32.19	38.50	1.625	28	132	613
34	43.75	0.938	1.661	34.19	40.50	1.625	32	137	707
36	46.00	1.000	1.751	36.19	42.75	1.625	32	161	824
38	48.75	1.000	1.853	38.19	45.25	1.625	32	185	980
40	50.75	1.000	1.933	40.19	47.25	1.625	36	193	1108
42	53.00	1.125	2.023	42.19	49.50	1.625	36	234	1264
44	55.25	1.125	2.114	44.19	51.75	1.625	40	249	1436
46	57.25	1.125	2.194	46.19	53.75	1.625	40	260	1600
48	59.50	1.250	2.285	48.19	56.00	1.625	44	306	1800
50	61.75	1.250	2.377	50.19	58.25	1.875	44	317	2017
52	64.00	1.250	2.468	52.19	60.50	1.875	44	339	2249
54	66.25	1.375	2.559	54.19	62.75	1.875	44	397	2499
60	73.00	1.500	2.820	60.19	69.25	1.875	52	508	3344
66	80.00	1.625	3.092	66.19	76.00	1.875	52	664	4403
72	86.50	1.750	3.353	72.19	82.50	1.875	60	802	5582
78	93.00	2.000		78.19	89.00	2.125	64	1000
84	99.75	2.000		84.19	95.50	2.125	64	1145
90	106.50	2.250		90.19	102.00	2.438	68	1404
96	113.25	2.250		96.19	108.50	2.438	68	1586
102	120.00	2.500		102.19	114.50	2.688	72	1912
108	126.75	2.500		108.19	120.75	2.688	72	2136
114	133.50	2.750		114.19	126.75	2.938	76	2525
120	140.25	2.750		120.19	132.75	2.938	76	2795
126	147.00	3.000		126.19	139.25	3.188	80	3252
132	153.75	3.000		132.19	145.75	3.188	80	3572
138	160.50	3.250		138.19	152.00	3.438	84	4101
144	167.25	3.250		144.19	158.25	3.438	84	4475

Awwa C207 Class D Slip On Flange (175-150 psi*)

Normal Pipe Size		Thick.			Drilling			Weight
	OD	Slip-On	Blind	Bore	Bolt Circle	Hole Dia	Number Holes	Slip-on	Blind
	A	T	T	B	C
4	9.00	0.625	0.625	4.57	7.50	0.750	8	8	11
5	10.00	0.625	0.650	5.66	8.50	0.875	8	9	14
6	11.00	0.688	0.693	6.72	9.50	0.875	8	11	19
8	13.50	0.688	0.812	8.72	11.75	0.875	8	15	33
10	16.00	0.688	0.953	10.88	14.25	1.000	12	19	54
12	19.00	0.812	1.117	12.88	17.00	1.000	12	33	90
14	21.00	0.938	1.133	14.19	18.75	1.125	12	47	111
16	23.50	1.000	1.265	16.19	21.25	1.125	16	60	155
18	25.00	1.062	1.331	18.19	22.75	1.250	16	64	185
20	27.50	1.125	1.448	20.19	25.00	1.250	20	79	244
22	29.50	1.188	1.568	22.19	27.25	1.375	20	90	304
24	32.00	1.250	1.661	24.19	29.50	1.375	20	112	378
26	34.25	1.312	1.786	26.19	31.75	1.375	24	129	466
28	36.50	1.312	1.906	28.19	34.00	1.375	28	141	565
30	38.75	1.375	2.008	30.19	36.00	1.375	28	164	671
32	41.75	1.500	2.150	32.19	38.50	1.625	28	211	834
34	43.75	1.500	2.252	34.19	40.50	1.625	32	220	959
36	46.00	1.625	2.370	36.19	42.75	1.625	32	261	1116
38	48.75	1.625	2.506	38.19	45.25	1.625	32	301	1325
40	50.75	1.625	2.609	40.19	47.25	1.625	36	313	1438
42	53.00	1.750	2.729	42.19	49.50	1.625	36	364	1706
44	55.25	1.750	2.849	44.19	51.75	1.625	40	387	1935
46	57.25	1.750	2.952	46.19	53.75	1.625	40	404	2153
48	59.50	1.875	3.072	48.19	56.00	1.625	44	460	2420
50	61.75	2.000	3.196	50.19	58.25	1.875	44	507	2712
52	64.00	2.000	3.315	52.19	60.50	1.875	44	542	3021
54	66.25	2.125	3.435	54.19	62.75	1.875	44	614	3355
60	73.00	2.250	3.779	60.19	69.25	1.875	52	763	4481
66	80.00	2.500	4.136	66.19	76.00	1.875	52	1021	5890
72	86.50	2.625	4.480	72.19	82.50	1.875	60	1203	7458
78	93.00	2.750		78.19	89.00	2.125	64	1374
84	99.75	2.875		84.19	95.50	2.125	64	1646
90	106.50	3.000		90.19	102.00	2.438	68	1872
96	113.25	3.250		96.19	108.50	2.438	68	2291
102	120.00	3.250		102.19	114.50	2.688	72	2485
108	126.75	3.375		108.19	120.75	2.688	72	2884
114	133.50	3.500		114.19	126.75	2.938	76	3214
120	140.25	3.500		120.19	132.75	2.938	76	3558
126	147.00	3.750		126.19	139.25	3.188	80	4065
132	153.75	3.875		132.19	145.75	3.188	80	4614
138	160.50	4.000		138.19	152.00	3.438	84	5047
144	167.25	4.125		144.19	158.25	3.438	84	5680

Awwa C207 Class D Hub Flange (175-150 psi*)

NPS						Drilling
	OD	Thick.	Overall Thick.	Dia at Base	Bore	Bolt Circle	Hole Diameter	Number Holes	Weight
	A	T	L	E	B	C
4	9.00	0.500	0.875	5.312	4.57	7.50	0.750	8	7
5	10.00	0.562	1.250	6.312	5.66	8.50	0.875	8	9
6	11.00	0.562	1.250	7.562	6.72	9.50	0.875	8	11
8	13.50	0.562	1.250	9.688	8.72	11.75	0.875	8	15
10	16.00	0.688	1.250	12.000	10.88	14.25	1.000	12	22
12	19.00	0.688	1.250	14.375	12.88	17.00	1.000	12	33
14	21.00	0.750	1.250	15.750	14.19	18.75	1.125	12	43
16	23.50	0.750	1.250	18.000	16.19	21.25	1.125	16	52
18	25.00	0.750	1.250	19.875	18.19	22.75	1.250	16	52
20	27.50	0.750	1.250	22.000	20.19	25.00	1.250	20	61
22	29.50	1.000	1.750	24.250	22.19	27.25	1.375	20	92
24	32.00	1.000	1.750	26.125	24.19	29.50	1.375	20	105
26	34.25	1.000	1.750	28.500	26.19	31.75	1.375	24	119
28	36.50	1.000	1.750	30.500	28.19	34.00	1.375	28	130
30	38.75	1.000	1.750	32.500	30.19	36.00	1.375	28	144
32	41.75	1.125	1.750	34.750	32.19	38.50	1.625	28	182
34	43.75	1.125	1.750	36.750	34.19	40.50	1.625	32	191
36	46.00	1.125	1.750	38.750	36.19	42.75	1.625	32	207
38	48.75	1.125	1.750	40.750	38.19	45.25	1.625	32	237
40	50.75	1.125	1.750	43.000	40.19	47.25	1.625	36	249
42	53.00	1.250	1.750	45.000	42.19	49.50	1.625	36	287
44	55.25	1.250	2.250	47.000	44.19	51.75	1.625	40	334
46	57.25	1.250	2.250	49.000	46.19	53.75	1.625	40	348
48	59.50	1.375	2.500	51.000	48.19	56.00	1.625	44	407
50	61.75	1.375	2.500	53.000	50.19	58.25	1.875	44	421
52	64.00	1.375	2.500	55.000	52.19	60.50	1.875	44	448
54	66.25	1.375	2.500	57.000	54.19	62.75	1.875	44	475
60	73.00	1.500	2.750	63.000	60.19	69.25	1.875	52	605
66	80.00	1.500	2.750	69.000	66.19	76.00	1.875	52	718
72	86.50	1.500	2.750	75.000	72.19	82.50	1.875	60	803
78	93.00	1.750	3.000	81.250	78.19	89.00	2.125	64	1010
84	99.75	1.750	3.000	87.500	84.19	95.50	2.125	64	1160
90	106.50	2.000	3.250	93.750	90.19	102.00	2.438	68	1430
96	113.25	2.000	3.250	100.000	96.19	108.50	2.438	68	1618

Call now to get Awwa C207 Class D Steel Ring Flange free sample, Accept all Small Orders of Flange Norma Awwas C207, Get Free Quote Tabela D Flanges Awwas C207, AWWA C207 Flanges manufacturers in India.

Awwa C207 E Ring Blind Flange (275 psi*)

Normal Pipe Size		Thick.			Drilling			Weight
	Outer Diameter	Slip-On	Blind	Bore	Bolt Circle	Hole Diameter	Number Holes	Slip-on	Blind
	A	T	T	B	C
4	9.00	1.125	1.125	4.57	7.50	0.750	8	14	20
5	10.00	1.188	1.188	5.66	8.50	0.875	8	16	26
6	11.00	1.313	1.313	6.72	9.50	0.875	8	20	35
8	13.50	1.500	1.500	8.72	11.75	0.875	8	33	61
10	16.00	1.563	1.563	10.88	14.25	1.000	12	44	89
12	19.00	1.750	1.750	12.88	17.00	1.000	12	71	141
14	21.00	1.875	1.875	14.19	18.75	1.125	12	94	184
16	23.50	2.000	2.000	16.19	21.25	1.125	16	120	246
18	25.00	2.125	2.125	18.19	22.75	1.250	16	127	296
20	27.50	2.375	2.375	20.19	25.00	1.250	20	168	400
22	29.50	2.500	2.500	22.19	27.25	1.375	20	189	484
24	32.00	2.625	2.625	24.19	29.50	1.375	20	234	598
26	34.25	2.750	2.750	26.19	31.75	1.375	24	270	718
28	36.50	2.750	2.750	28.19	34.00	1.375	28	297	815
30	38.75	2.875	2.875	30.19	36.00	1.375	28	344	961
32	41.75	3.000	3.000	32.19	38.50	1.625	28	422	1163
34	43.75	3.000	3.050	34.19	40.50	1.625	32	441	1299
36	46.00	3.125	3.209	36.19	42.75	1.625	32	502	1511
38	48.75	3.125	3.394	38.19	45.25	1.625	32	580	1795
40	50.75	3.250	3.533	40.19	47.25	1.625	36	626	2025
42	53.00	3.375	3.695	42.19	49.50	1.625	36	701	2309
44	55.25	3.375	3.857	44.19	51.75	1.625	40	747	2715
46	57.25	3.438	3.997	46.19	53.75	1.625	40	794	2813
48	59.50	3.500	4.159	48.19	56.00	1.625	44	858	3276
50	61.75	3.500	4.327	50.19	58.25	1.875	44	887	3671
52	64.00	3.625	4.489	52.19	60.50	1.875	44	982	4091
54	66.25	3.750	4.651	54.19	62.75	1.875	44	1083	4542
60	73.00	3.875	5.116	60.19	69.25	1.875	52	1313	6066
66	80.00	4.250	5.601	66.19	76.00	1.875	52	1736	7976
72	86.50	4.375	6.066	72.19	82.50	1.875	60	2005	10099
78	93.00	4.750	78.19	89.00	2.125	64	2374
84	99.75	4.750	84.19	95.50	2.125	64	2719
90	106.50	5.125	90.19	102.00	2.438	68	3197
96	113.25	5.125	96.19	108.50	2.438	68	3613
102	120.00	5.500	102.19	114.50	2.688	72	4206
108	126.75	5.500	108.19	120.75	2.688	72	4700
114	133.50	5.875	114.19	126.75	2.938	76	5395
120	140.25	5.875	120.19	132.75	2.938	76	5972
126	147.00	6.250	126.19	139.25	3.188	80	6775
132	153.75	6.250	132.19	145.75	3.188	80	7442
138	160.50	6.750	138.19	152.00	3.438	84	8517
144	167.25	6.750	144.19	158.25	3.438	84	9295

Blind Flange Awwa C207 Class D ISO Certified Materials, Contact us today for buy Awwa C207 Class E Hub Flange, Global sales network of Awwas C207 Class B, Fast and cost-effective of Awwas C207 Class E, Stockist Of AWWAS C207 Flanges In India.

Awwa C207 Class E Hub Flange (275 psi*)

Normal Pipe Size						Drillin
	Outer Diameter	Thick.	Overall Thick.	Diameter at Base	Bore	Bolt Circle	Hole Dia	Number Holes	Weight
	A	T	L	E	B	C
4	9.00	0.938	1.312	5.312	4.57	7.50	0.750	8	13
5	10.00	0.938	1.438	6.438	5.66	8.50	0.875	8	14
6	11.00	1.000	1.562	7.562	6.72	9.50	0.875	8	17
8	13.50	1.125	1.750	9.688	8.72	11.75	0.875	8	28
10	16.00	1.188	1.938	12.000	10.88	14.25	1.000	12	37
12	19.00	1.250	2.188	14.375	12.88	17.00	1.000	12	59
14	21.00	1.375	2.250	15.750	14.19	18.75	1.125	12	78
16	23.50	1.438	2.500	18.000	16.19	21.25	1.125	16	101
18	25.00	1.562	2.688	19.875	18.19	22.75	1.250	16	110
20	27.50	1.688	2.875	22.000	20.19	25.00	1.250	20	139
22	29.50	1.812	3.125	24.000	22.19	27.25	1.375	20	162
24	32.00	1.875	3.250	26.125	24.19	29.50	1.375	20	197
26	34.25	2.000	3.375	28.500	26.19	31.75	1.375	24	235
28	36.50	2.062	3.438	30.750	28.19	34.00	1.375	28	269
30	38.75	2.125	3.500	32.750	30.19	36.00	1.375	28	303
32	41.75	2.250	3.625	35.000	32.19	38.50	1.625	28	375
34	43.75	2.312	3.688	37.000	34.19	40.50	1.625	32	401
36	46.00	2.375	3.750	39.250	36.19	42.75	1.625	32	452
38	48.75	2.375	3.750	41.750	38.19	45.25	1.625	32	528
40	50.75	2.500	3.875	43.750	40.19	47.25	1.625	36	573
42	53.00	2.625	4.000	46.000	42.19	49.50	1.625	36	648
44	55.25	2.625	4.000	48.000	44.19	51.75	1.625	40	688
46	57.25	2.688	4.062	50.000	46.19	53.75	1.625	40	733
48	59.50	2.750	4.125	52.250	48.19	56.00	1.625	44	799
50	61.75	2.750	4.125	54.250	50.19	58.25	1.875	44	827
52	64.00	2.875	4.250	56.500	52.19	60.50	1.875	44	922
54	66.25	3.000	4.375	58.750	54.19	62.75	1.875	44	1024
60	73.00	3.125	4.500	65.250	60.19	69.25	1.875	52	1253
66	80.00	3.375	4.875	71.500	66.19	76.00	1.875	52	1623
72	86.50	3.500	5.000	78.500	72.19	82.50	1.875	60	1922
78	93.00	3.875	5.375	84.500	78.19	89.00	2.125	64	2279
84	99.75	3.875	5.375	90.500	84.19	95.50	2.125	64	2586
90	106.50	4.250	5.750	96.750	90.19	102.00	2.438	68	3061
96	113.25	4.250	5.750	102.750	96.19	108.50	2.438	68	3432

Awwa C207 Class F Ring Flange (300 psi*)

Normal Pipe Size		Thick.			Drilling			Weight
	Outer Diameter	Slip-On	Blind	Bore	Bolt Circle	Hole Diameter	Number Holes	Slip-on	Blind
	A	T	T	B	C
4	10.00	1.130	1.130	4.57	7.88	0.875	8	18	25
5	11.00	1.210	1.210	5.66	9.25	0.875	8	22	33
6	12.50	1.310	1.310	6.73	10.62	0.875	12	30	46
8	15.00	1.310	1.310	8.73	13.00	1.000	12	40	66
10	17.50	1.500	1.500	10.88	15.25	1.125	16	56	102
12	20.50	1.630	1.630	12.88	17.75	1.250	16	83	152
14	23.00	1.940	1.940	14.19	20.25	1.250	20	128	228
16	25.50	2.140	2.140	16.19	22.50	1.375	20	167	310
18	28.00	2.250	2.250	18.19	24.75	1.375	24	204	392
20	30.50	2.330	2.330	20.19	27.00	1.375	24	247	482
22	33.00	2.500	2.500	22.19	29.25	1.375	24	307	606
24	36.00	2.690	2.690	24.19	32.00	1.625	24	388	776
26	38.25	3.000	3.000	26.19	34.50	1.875	28	451	977
28	40.75	3.130	3.130	28.19	37.00	1.875	28	532	1156
30	43.00	3.150	3.166	30.19	39.25	1.875	28	586	1303
32	45.25	3.250	3.332	32.19	41.50	1.875	28	657	1518
34	47.50	3.380	3.475	34.19	43.50	1.875	28	741	1745
36	50.00	3.460	3.671	36.19	46.00	2.125	32	802	2042
38	52.25	3.500	3.815	38.19	48.00	2.125	32	874	2317
40	54.25	3.630	3.982	40.19	50.25	2.125	36	937	2608
42	57.00	3.810	4.171	42.19	52.75	2.125	36	1103	3015
44	59.25	4.000	4.338	44.19	55.00	2.125	36	1237	3388
46	61.50	4.130	4.505	46.19	57.25	2.125	40	1344	3791
48	65.00	4.500	4.781	48.19	60.75	2.125	40	1718	4494

send us mail

Check AWWA C207 Blind Flange Dimension, Buy AWWA C207 Steel Pipe Flanges Standard At Low Price In India.

Table of Contents