-
-
send us mail
[email protected]
The ASTM A694 F65 Flanges is required to undergo a chemical heat analysis while conforming to the chemistry, mechanical property requirements as well as the testing requirements. The grade F65 is what designates the minimum yield strength in KSI at 0.2% offset. Hence, the minimum yield strength at 0.2% offset for the SA 694 Gr F65 Elbow is 65 KSI. Industries like the oil and gas prefer using the inexpensive yet, strong carbon steel in its piping systems. Carbon Steel A694 F65 Material has the ability to withstand high stresses that occur during the transmission service, thus making them an ideal alloy for several industries. ASTM A694 Gr F60 Forged Fittings also have superior mechanical and metallurgical properties including good fatigue and impact resistance.
ASTM A694 F65 Flanges
A694 Gr F60 Forged Fittings
SAA694 F65 Material
Forged components like fittings, flanges or valves could be produced under standard ASME B16.5 as well as specification ASTM A694. F
An ASTM A694 Gr F65 SORF Flange is connected to the pipe or the fittings with the use of two fillet welds. One fillet weld has been executed inside, whereas the one is executed outside the cavity of the flange. Often referred to as a Hubbed Flange, the bore size of an ASME B16.5 A694 Gr F65 SORF Flanges tends to be larger than the outside diameter of the connecting pipe. since the pipe has to slide inside the flange in order to be connected by the execution of a fillet welds inside and outside the flange. Slip-on flanges are usually are easy to recognize due to their slim and compact shape.
| Specification : | ASTM A694 F65 Flanges |
| Design For Size: | DIN, JIS, ANSI, BS, PN, EN, ASA, ASME |
| Forged Type : | NPT (Threaded), BSPT, BSPP. |
| Pressure Rating Table: | Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS |
| Standards: | DIN Flanges, PN Flanges, JIS Flanges, ISO Flanges, UNI Flanges, AWWA Flanges, ASME B16.38 Flanges, EN-1092 Flanges, BS10 Flanges, MSS SP44 Flanges, ASME B16.5 Flanges, ASME B16.47 (Series A, Series B) Flanges, GOST Flanges |
| Production Process: | Machined, Forged, Heat Treated |
| Flange Machining Equipment: | Pushing Machine, Press machine, Sand-blasting machine, electric bevelling machine, Bending machine etc |
| Size Chart : | 1/2″ (15 NB) To 48″ (1200NB) |
| Coating Flange Faces : | Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized, Oil Black Paint, Anti-rust Paint |
| Dimensions Class: | 2000#, 3000#, 6000#, 9000# |
| Application: | Oil And Gas Industry Water Pipeline Industry Chemical Industry Nuclear Power Plant Fabrication Industry Natural Gas Industry |
Carbon Steel A694 F65 90 Deg Elbow
Carbon Steel ASME SA694 F65 Socket Weld Tee
ASME SA 694 F65 Threaded Union
ASTM A694 F65 Steel Threaded Hex Plug
A694 CS Gr F65 Socket Weld Flanges
Grade F65 Carbon Steel Slip On Flanges
High Yield Carbon Steel F65 RTJ Flanges
Steel Grade F65 Raised Face Flanges
SA 694 F65 Blind Flanges
Carbon Steel A694 Grade F65 Flat Face Flanges
ASTM A694 Gr F65 Reducing Flanges
A694 F65 Weld Neck Flanges
NPS |
Flange (ID) (inch) |
Flange (OD) (inch) |
||||
| 150# | 300# | 400# | 600# | 900# | ||
| 1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
| 3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
| 1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
| 1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
| 1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
| 2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
| 2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
| 3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
| 4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
| 5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
| 6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
| 8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
| 10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
| 12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
| Standard | Class | Di. | Bolt Circle Dia. | No. of Bolts | Bolt Size | Dia. of Bolt Hole |
|---|---|---|---|---|---|---|
| AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
| 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
| Table D | 95 | 67 | 4 | 13 | 14 | |
| Table E | 95 | 67 | 4 | 13 | 14 | |
| Table F | 95 | 67 | 4 | 13 | 14 | |
| Table H | 114 | 83 | 4 | 16 | 17 | |
| Table J | 114 | 83 | 4 | 16 | 17 | |
| ASME B16.5 Flanges | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 |
| Temp. °C | ASTM A694 F65 Flanges Working Pressure Range | ||||||
|---|---|---|---|---|---|---|---|
| 150# | 300# | 400# | 600# | 900# | 1500# | 2500# | |
| -29 ~ 38 | 19.6 | 51.1 | 68.1 | 102.1 | 153.2 | 255.3 | 425.5 |
| 50 | 19.2 | 50.1 | 66.8 | 100.2 | 150.4 | 250.6 | 417.7 |
| 100 | 17.7 | 46.6 | 62.1 | 93.2 | 139.8 | 233.0 | 388.3 |
| 150 | 15.8 | 45.1 | 60.1 | 90.2 | 135.2 | 225.4 | 375.6 |
| 200 | 13.8 | 43.8 | 58.4 | 87.6 | 131.4 | 219.0 | 365.0 |
| 250 | 12.1 | 41.9 | 55.9 | 83.9 | 125.8 | 209.7 | 349.5 |
| 300 | 10.2 | 39.8 | 53.1 | 79.6 | 119.5 | 199.1 | 331.8 |
| 325 | 9.3 | 38.7 | 51.6 | 77.4 | 116.1 | 193.6 | 322.6 |
| 350 | 8.4 | 37.6 | 50.1 | 75.1 | 112.7 | 187.8 | 313.0 |
| 375 | 7.4 | 36.4 | 48.5 | 72.7 | 109.1 | 181.8 | 303.1 |
| 400 | 6.5 | 34.7 | 46.3 | 69.4 | 104.2 | 173.6 | 289.3 |
| 425 | 5.5 | 28.8 | 38.4 | 57.5 | 86.3 | 143.8 | 239.7 |
| 450 | 4.6 | 23.0 | 30.7 | 46.0 | 69.0 | 115.0 | 191.7 |
| 475 | 3.7 | 17.4 | 23.2 | 34.9 | 52.3 | 87.2 | 145.3 |
| 500 | 2.8 | 11.8 | 15.7 | 23.5 | 35.3 | 58.8 | 97.9 |
| 538 | 1.4 | 5.9 | 7.9 | 11.8 | 17.7 | 29.5 | 49.2 |
Check ASTM A694 F65 Flanges UNS NumberK03014
| Grade | C | Mn | P | S | Si |
| A694 Carbon Steel Gr F65 | 0.26-0.265 | 1.60-1.64 | 0.025-0.030 | 0.025-0.030 | 0.15-0.35 |
| Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| ASTM A694 Gr F65 | 415 | 450 | 20 % |
| Grade | Yield Strength (0.2 % Offset), minimum, ksi [MPa] | Tensile Strength, min, ksi [MPa] | Elongation in 2 in. or 50 millimeter, minimum % | - | - |
| Carbon Steel A694 Grade F65 | 450 | 65 | 530 | 77 | 20 |