Contact US For AMS 5506 Sheet, Stainless Steel UNS S30403 Plate Instant Delivery.
Stainless Steel 420 Sheet is a stainless steel that has high carbon content in its composition. The material has high toughness due to the high carbon content. Suryadeep Industry is a leading manufacturer and supplier of the 420 Stainless Steel Sheet products in various quantities and dimensions. The material is made up of carbon, iron, chromium, manganese, silicon, phosphorus and sulfur in its composition. The AMS 5506 Sheet contains chromium in 12% of the composition and this makes the steel corrosion resistant to most general corrosive applications. The material has high tensile and yield strengths at 204 degrees Celsius. The minimum tensile strength is 1600MPa and the minimum yield strength is 1360MPa. The strength of the AISI 420 Stainless Steel Sheet drops down with the increasing temperature. The material has only 895MPa minimum tensile strength and 680MPa minimum yield strength at 650 degrees Celsius. The SS 420 Sheet is annealed and it is used with high hardness. The material can belong to different specifications for different applications. The specifications could be A240 pressure vessel specification or the A276.
The AISI 420 Sheet should not be attempted to temper in the range of 400 degrees to 600 degrees Celsius because the material tempts to brittle in this range. However, the annealing of the SS 420 Plate avoids it from being brittle. There are different production methods, polishing and finishing available for the Stainless Steel SUS 420 Hot Rolled Plates and the cold rolled sheets. The material has good thermal conductivity and electric conductivity as well. The material is air quenched or oil quenched after being heated up to 980 degrees Celsius for hardening heat treatment. The Stainless Steel 420 2B Finish Plates are used in outdoor applications that require polished surfaces. The material can also be used in high pressure applications with the requirements of the ASME SA240 Stainless Steel 420 Plates. Since they are strong and corrosion resistant, they are used in shear blades, cutlery, needle valves and in surgical equipment for the most part. Please contact us for further information on the AISI SS 420 Plates.
SS 420 Sheet Analysis Specification
Specifications |
ASTM A240 / ASME SA240 |
Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Width |
1000 milimeter / 1219 milimeter /1250 milimeter / 1500 milimeter / 2000 milimeter |
Finish |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Length |
2000 milimeter / 2440 milimeter / 2500 milimeter / 3000 milimeter / 6000 milimeter |
Form |
Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Thickness |
5 milimeter to 50 milimeter |
We Maintain 420 Stainless Steel Sheet Good Quality, AISI 420 Stainless Steel Sheet Supplier In Bhopal, India, Check Specificatiion Of SS 420 Sheet, Get Free Quote Of TP 420Stainless Steel Sheet.
Stainless Steel 420 Plate Chemical Composition Table
Grade |
S |
C |
Cr |
Mn |
Ni |
P |
Mo |
Si |
SS 420 |
0.030 |
0.15 |
12.00-14.00 |
1.00 |
0.75 |
0.040 |
0.50 |
1.000 |
AISI 420 Stainless Steel Sheet Mechanical Strength Table
Check AISI 420 Sheet Chemical Composition And Mechanical Properties Of UNS S30403 Stainless Steel Sheet. Check Availability Of SS 420 Plate.
Tensile Strength |
Reduction in Area |
Yield Strength |
Hardness |
Elongation |
Psi – 85,000 |
55% |
Psi – 45,000 |
Rb 180 |
50% |
What Are The Different Types Of Stainless Steel 420 Sheet?
Stainless Steel 420 Plate
AISI 420 Stainless Steel Sheet
SS 420 Sheet
TP 420 stainless steel Sheets
AISI 420 Sheet
UNS S30403 Stainless Steel Sheet
SS 420 Plate
Stainless Steel SUS 420 Hot Rolled Plates
Stainless Steel 420 2B Finish Plates
ASME SA240 Stainless Steel 420 Plates
SS 420 Coils
Stainless Steel 420 Sheet
Equivalent Material Of AISI 420 Sheet
Supplier Of Stainless Steel SUS 420 Hot Rolled Plates In Bhopal, India, Get Free Quote For Stainless Steel 420 2B Finish Plates, Equivalent Grades Of ASME SA240 Stainless Steel 420 Plates.
Grade |
JIS |
UNS |
BS |
DIN |
EN |
SS 420 |
SUS 420J1 |
S42000 |
420S29 |
1.4021 |
X20Cr13 |
SS 420 Plate Physical Properties
Grade |
Specific Heat 0-100°C
(J/kg.K) |
Density (kg/m3) |
Thermal Conductivity
(W/m.K) |
Elastic Modulus (GPa) |
Mean Coefficient of Thermal Expansion
(μm/m/°C) |
Electrical Resistivity (nΩ.m) |
at 100°C |
at 500°C |
0-315°C |
0-100°C |
0-538°C |
420 |
460 |
7800 |
24.9 |
- |
200 |
10.8 |
10.3 |
11.7 |
550 |
TP 420 Stainless Steel Sheet Gauges
Refer SS 420 Coils Gauges And Din 1.4021 Sheet Tolerance, Looking to buy Stainless Steel 420 Sheet? contact Suryadeep Industry, A Reliable ASTM A240 420 Stainless Steel Sheet Manufacturer in India
|
STANDARD VARIANCE FROM |
NOMINAL DECIMAL |
METAL GAUGE |
NOMINAL DECIMAL (+/- INCHES) |
( INCHES) |
7 |
0.0080 |
0.1793 |
8 |
0.0080 |
0.1644 |
9 |
0.0080 |
0.1495 |
10 |
0.0070 |
0.1345 |
11 |
0.0050 |
0.1196 |
12 |
0.0050 |
0.1046 |
13 |
0.0050 |
0.0897 |
14 |
0.0040 |
0.0747 |
15 |
0.0040 |
0.0673 |
16 |
0.0030 |
0.0598 |
17 |
0.0030 |
0.0538 |
18 |
0.0030 |
0.0478 |
19 |
0.0030 |
0.0418 |
20 |
0.0030 |
0.0359 |
21 |
0.0025 |
0.0329 |
22 |
0.0020 |
0.0299 |
23 |
0.0020 |
0.0269 |
24 |
0.0020 |
0.0239 |
25 |
0.0015 |
0.0209 |
26 |
0.0015 |
0.0179 |
28 |
0.0010 |
0.0149 |
Din 1.4021 Sheet Tolerances
Gauge |
LB/Sq In. |
LB/Sq. Ft. |
Gauge Tolerance |
96″ Wide |
72″ Wide |
3/16 |
0.1875 |
0.05958 |
8.579 |
+.050″ -.010″ |
+.045″ -.010″ |
7/32 |
0.2187 |
0.06854 |
9.870 |
1/4 |
0.2500 |
0.07750 |
11.162 |
5/16 |
0.3125 |
0.09546 |
13.746 |
3/8 |
0.3750 |
0.11456 |
16.496 |
+.060″ -.010″ |
+.055″ -.010″ |
7/16 |
0.4375 |
0.13250 |
19.080 |
1/2 |
0.5000 |
0.15044 |
21.633 |
9/16 |
0.5625 |
0.16838 |
24.247 |
5/8 |
0.6250 |
0.18633 |
26.831 |
11/16 |
0.6875 |
0.20427 |
29.415 |
3/4 |
0.7500 |
0.22308 |
32.123 |
+.065″ -.010″ |
+.060″ -.010″ |
13/16 |
0.8125 |
0.24102 |
34.707 |
7/8 |
0.8750 |
0.25897 |
37.291 |
15/16 |
0.9375 |
0.27691 |
39.875 |
1 |
1.0000 |
0.29628 |
42.665 |
+.075 -.010″ |
+.070″ -.010″ |
1-1/8 |
1.1250 |
0.33217 |
47.833 |
1-1/4 |
1.2500 |
0.36806 |
53.001 |
1-3/8 |
1.3750 |
0.40395 |
58.169 |
1-1/2 |
1.5000 |
0.43984 |
63.337 |
1-3/4 |
1.7500 |
0.51161 |
73.672 |
2 |
2.0000 |
0.58339 |
84.008 |
+.150″ -.010″ |
+.125″ -.010″ |
2-1/8 |
2.1250 |
0.62229 |
89.610 |
2-1/4 |
2.2500 |
0.65817 |
94.777 |
2-1/2 |
2.5000 |
0.72995 |
105.113 |
2-3/4 |
2.7500 |
0.80173 |
115.449 |
3 |
3.0000 |
0.87709 |
126.301 |
+.160″ -.010″ |
+.150″ -.010″ |
3-1/2 |
3.5000 |
1.02064 |
146.972 |
4 |
4.0000 |
1.16850 |
168.264 |
+.200″ -.010 |
+.180″ -.010″ |
Stainless Steel 420 Sheets, Plates & Coils Finishes As Per ASTM A240M
Surface Finish |
Definition |
Application |
2B |
Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. |
Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA |
Those processed with bright heat treatment after cold rolling. |
Kitchen utensils, Electric equipment, Building construction. |
NO.3 |
Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. |
Kitchen utensils, Building construction. |
NO.4 |
Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. |
Kitchen utensils, Building construction, Medical equipment. |
HL |
Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. |
Building Construction. |
NO.1 |
The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. |
Chemical tank, pipe |
ASTM A240 Stainless Steel 420 Plate Melting Range
Plate Type |
Melting Point |
Stainless Steel 420 Plate |
1398-1446°C
2550-2635°F |
ASME SA240 Stainless Steel 420 Plate Density
Plate Type |
Density |
Stainless Steel 420 Plate |
7.92 g/cm3 |
Plain & Polished 420 Stainless Steel Sheet
PRODUCT |
FINISH |
THICKNESS MM |
MAX SHEET SIZE MM |
Grade 420 |
Plain 2B |
0.9 |
2000 x 1000 |
|
Bright |
0.9 |
2000 x 1000 |
|
Brushed Finish |
0.9, 1.2 |
2000 x 1000, 2500 x 1250 |
|
Rimex Super Mirror |
0.8, 1.2 |
2400 x 1200, 2500 x 1250 |
|
Embossed |
0.8, 1.0 |
2500 x 1250 |
Perforated Stainless Steel Sheet 420
Hole Dia mm |
Hole Centres mm |
O/A |
Finish |
Tck mm |
Full Sheet Size mm |
0.75 |
1.5 |
23% |
2B |
0.6 |
2000 x 1000 |
1 |
2 |
23% |
2B |
1.0 |
2000 x 1000 |
1.5 |
2.6 |
30% |
2B |
1.0 |
2000 x 1000 |
2 |
3.5 |
30% |
2B |
1.0 |
2000 x 1000 |
2 |
3.5 |
30% |
2B |
1.0 |
2000 x 1000 |
3 |
5 |
33% |
2B |
1.0 |
2000 x 1000 |
4 |
5.6 |
46% |
2B |
1.0 |
2000 x 1000 |
5 |
8 |
35% |
2B |
1.0 |
2000 x 1000 |
6 |
8 |
51% |
2B |
1.0 |
2000 x 1000 |
8 |
10 |
58% |
2B |
1,0 |
2000 x 1000 |
ASTM A240 Stainless Steel 420 Plate Metric Dimensions
Plate Surface finish |
Thickness (mm) |
Width (max mm) |
2B – Cold rolled, heat treated, pickled, skin passed plate |
0.25–8.0 |
2032 |
2D – Cold rolled, heat treated, pickled plate |
0.4–6.35 |
1524 |
2E – Cold rolled, heat treated, mechanically descaled plate |
0.4–8.0 |
2032 |
2R – Cold rolled, bright annealed plate |
0.25–3.5 |
1524 |
2H – Work hardened plate |
0.4–6.35 |
1524 |
Polished, brushed plate |
0.5–4.0 |
1524 |
Imperial Dimensions of Stainless Steel 420 Plate
Plate Surface finish |
Gauge (in) |
Width (max in) |
2B – Cold rolled, heat treated, pickled, skin passed Plate |
10–24 |
72* |
2D – Cold rolled, heat treated, pickled plate |
12–24 |
60 |
BA Mexinox only |
18–28 |
48 |
Polished plate (not brushed) |
11–24 |
60 |
Temper rolled plate Mexinox only |
13–29 |
48 |
Stainless Steel Sheets -Type 420 | No. 2B Finish — Cold Rolled, Annealed
Stainless Steel Gauge, Width and Length |
Weight
Lbs. per Sq Ft. |
Est. Wt. per Sheet |
7GA (.1874") |
|
|
48 x 96 |
7.871 |
251.9 |
48 x 120 |
7.871 |
314.8 |
48 x 144 |
7.871 |
377.8 |
10GA (.135”) |
|
|
36 x 120 |
5.670 |
170.1 |
48 x 96 |
5.670 |
181.4 |
48 x 120 |
5.670 |
226.8 |
60 x 120* |
5.670 |
283.5 |
60 x 144* |
5.670 |
340.2 |
72 x 120* |
5.670 |
340.2 |
11 GA (.120") |
|
|
36 x 96 |
5.040 |
121.0 |
36 x 120 |
5.040 |
151.2 |
36 x 144 |
5.040 |
181.4 |
48 x 96 |
5.040 |
161.3 |
48 x 120 |
5.040 |
201.6 |
48 x 144 |
5.040 |
241.9 |
60 x 120 |
5.040 |
252.0 |
60 x 144 |
5.040 |
302.4 |
72 x 120* |
5.040 |
302.4 |
72 x 144* |
5.040 |
362.9 |
12 Ga. (.105") |
|
|
36 x 96 |
4.410 |
105.8 |
36 x 120 |
4.410 |
132.3 |
36 x 144 |
4.410 |
158.8 |
42 x 120 |
4.410 |
154.4 |
48 x 96 |
4.410 |
141.1 |
48 x 120 |
4.410 |
176.4 |
48 x 144 |
4.410 |
211.7 |
60 x 96 |
4.410 |
176.4 |
60 x 120 |
4.410 |
220.5 |
60 x 144 |
4.410 |
264.6 |
72 x 120* |
4.410 |
264.6 |
72 x 144 |
4.410 |
317.5 |
13 Ga (.090") |
|
|
36 x 96 |
3.780 |
90.72 |
36 x 120 |
3.780 |
113.4 |
48 x 120 |
3.780 |
151.2 |
14 Ga. (.075") |
|
|
30 x 120 |
3.150 |
78.75 |
36 x 96 |
3.150 |
75.60 |
36 x 120 |
3.150 |
94.50 |
36 x 144 |
3.150 |
113.4 |
42 x 120 |
3.150 |
110.3 |
42 x 144 |
3.150 |
132.3 |
48 x 96 |
3.150 |
100.8 |
48 x 120 |
3.150 |
126.0 |
48 x 144 |
3.150 |
151.2 |
60 x 120 |
3.150 |
157.5 |
60 x 144 |
3.150 |
189.0 |
72 x 120 |
3.150 |
189.0 |
72 x 144 |
3.150 |
226.8 |
16 Ga. (.060") |
|
|
30 x 96 |
2.520 |
50.40 |
30 x 120 |
2.520 |
63.00 |
36 x 96 |
2.520 |
60.48 |
36 x 120 |
2.520 |
75.60 |
36 x 144 |
2.520 |
90.72 |
42 x 120 |
2.520 |
88.20 |
48 x 96 |
2.520 |
80.64 |
48 x 120 |
2.520 |
100.8 |
48 x 144 |
2.520 |
121.0 |
60 x 96 |
2.520 |
100.8 |
60 x 120 |
2.520 |
126.0 |
60 x 144 |
2.520 |
151.2 |
18 Ga. (.048") |
|
|
30 x 96 |
2.016 |
40.32 |
30 x 120 |
2.016 |
50.40 |
36 x 96 |
2.016 |
48.38 |
36 x 120 |
2.016 |
60.48 |
36 x 144 |
2.016 |
72.58 |
42 x 120 |
2.016 |
70.56 |
48 x 96 |
2.016 |
64.51 |
48 x 120 |
2.016 |
80.64 |
48 x 144 |
2.016 |
96.77 |
60 x 120 |
2.016 |
100.8 |
60 x 144 |
2.016 |
121.0 |
19 Ga. (.042") |
|
|
36 x 120 |
1.764 |
52.92 |
20 Ga. (.036") |
|
|
30 x 96 |
1.512 |
30.24 |
30 x 120 |
1.512 |
37.80 |
36 x 96 |
1.512 |
36.29 |
36 x 120 |
1.512 |
45.36 |
36 x 144 |
1.512 |
54.43 |
42 x 120 |
1.512 |
52.92 |
48 x 96 |
1.512 |
48.38 |
48 x 120 |
1.512 |
60.48 |
48 x 144 |
1.512 |
72.58 |
22 Ga. (.030") |
|
|
30 x 96 |
1.260 |
25.20 |
30 x 120 |
1.260 |
61.50 |
36 x 96 |
1.260 |
30.24 |
36 x 120 |
1.260 |
37.80 |
36 x 144 |
1.260 |
45.36 |
48 x 96 |
1.260 |
40.32 |
48 x 120 |
1.260 |
50.40 |
24 Ga. (.024") |
|
|
30 x 96 |
1.008 |
20.16 |
30 x 120 |
1.008 |
25.20 |
36 x 96 |
1.008 |
24.19 |
36 x 120 |
1.008 |
30.24 |
48 x 96 |
1.008 |
32.26 |
48 x 120 |
1.008 |
40.32 |
26 Ga. (.018") |
|
|
30 x 96 |
.7560 |
15.12 |
30 x 120 |
.7560 |
18.90 |
36 x 96 |
.7560 |
18.14 |
36 x 120 |
.7560 |
22.68 |
48 x 96 |
.7560 |
24.1 |
48 x 120 |
.7560 |
30.24 |
28 Ga. (.015") |
|
|
36 x 96 |
.630 |
15.12 |
36 x 120 |
.630 |
18.90 |
Type 420 – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet
Style Designation |
Size in Inches |
Wt. per Sq. Ft. in Lbs. |
Wt. Per Sheet |
3/4__9 |
48 x 96 |
1.95 |
62.4 |
1/2__13 |
48 x 96 |
1.78 |
56.9 |
1/2__16 |
48 x 96 |
0.86 |
27.5 |
1/2__18 |
48 x 96 |
0.69 |
22.1 |
1-1/2__9 |
48 x 96 |
1.31 |
41.9 |
3/4__13 |
48 x 96 |
0.86 |
27.5 |
3/4__16 |
48 x 96 |
0.57 |
18.2 |
3/4__18 |
48 x 96 |
0.46 |
14.7 |
1-1/2__13 |
48 x 96 |
0.65 |
20.8 |
SS 420 Plate Weight Per Unit
Thickness |
Plate Weight per Unit Area |
Density |
3/16 inches |
0.06000 lbs/in²42.184176 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/4 inches |
0.08 lbs/in²56.245568 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/8 inches |
0.121 lbs/in²85.0714216 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/2 inches |
0.161 lbs/in²113.1942056 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
5/8 inches |
0.196 lbs/in²137.8016416 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/4 inches |
0.235 lbs/in²165.221356 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
7/8 inches |
0.274 lbs/in²192.6410704 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 inches |
0.313 lbs/in²220.0607848 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches |
0.391 lbs/in²274.9002136 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches |
0.47 lbs/in²330.442712 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches |
0.549 lbs/in²385.9852104 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 inches |
0.627 lbs/in²440.8246392 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches |
0.705 lbs/in²495.664068 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches |
0.784 lbs/in²551.2065664 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches |
0.862 lbs/in²606.0459952 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3 inches |
0.941 lbs/in²661.5884936 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
SS UNS S42000 Plate Sizes
Thickness (in)
|
Thickness (mm)
|
Max Width (in)
|
Max Width (mm)
|
Weight (Lbs per Feet)
|
Weight (Kilos per m2)
|
0.015 |
0.381 |
24 |
609.6 |
0.6048 |
2.9532 |
0.018 |
0.4572 |
24 |
609.6 |
0.7258 |
3.5441 |
0.022 |
0.5588 |
24 |
609.6 |
0.887 |
4.3312 |
0.028 |
0.7112 |
24 |
609.6 |
1.129 |
5.5129 |
0.032 |
0.8128 |
24 |
609.6 |
1.2902 |
6.3 |
0.042 |
1.0668 |
24 |
609.6 |
1.6934 |
8.2689 |
0.05 |
1.27 |
24 |
609.6 |
2.016 |
9.8441 |
0.062 |
1.5748 |
24 |
609.6 |
2.4998 |
12.2065 |
0.077 |
1.9558 |
24 |
609.6 |
3.1046 |
15.1598 |
0.094 |
2.3876 |
24 |
609.6 |
3.7901 |
18.5071 |
Stainless Steel 420 Sheet , Plate & Coil Thickness
0.6 mm |
0.8 mm |
1.0 mm |
1.2 mm |
1.5 mm |
1.6 mm |
1.8 mm |
2.0 mm |
3.0 mm |
4.0 mm |
5.0 mm |
6.0 mm |
8.0 mm |
10.0 mm |
12.0 mm |
15.0 mm |
20.0 mm |
25.4 mm |
SS 420 Sheet & Foil Thickness
Thickness (in mm) |
0.004, Temper: As rolled |
0.2, Temper: Annealed |
0.005, Temper: As rolled |
0.2, Temper: Half hard |
0.0065, Temper: As rolled |
0.25, Temper: Annealed |
0.0076, Temper: As rolled |
0.25, Temper: Half hard |
0.01, Temper: As rolled |
0.30, Coil width: 15.5, Temper: Half hard |
0.02, Temper: As rolled |
0.38, Temper: Annealed |
0.02, Temper: Half hard |
0.5, Temper: Half hard |
0.025, Temper: As rolled, Condition: Surface oxide |
0.75, Temper: Half hard |
0.025, Temper: As rolled |
1.0, Temper: Annealed |
0.05, Temper: Half hard |
2.0, Temper: 1/4 Hard |
0.05, Temper: Quarter hard |
2.0, Temper: Half hard |
0.075, Temper: Half hard |
3.0, Temper: Annealed |
0.1, Temper: Half hard |
3.0, Temper: 1/4 Hard |
0.1, Coil width: 10, Temper: Half hard |
6.35, Temper: Hard |
0.125, Temper: Half hard |
0.15, Coil width: 0.3, Temper: Half hard |
0.15, Temper: Half hard |
|
420 Cold Rolled Stainless Sheet Tolerance
420Cold Rolled Stainless Sheet |
Thickness |
Tolerance
Specified Width |
Equal To |
Less Than |
≤ 1000 |
1000< thru ≤ 1300 |
1300 < thru ≤ 2100 |
.30mm |
.50mm |
±.04mm |
– |
– |
.50mm |
.60mm |
±.045mm |
±.05mm |
– |
.60mm |
.80mm |
±.05mm |
±.05mm |
– |
.80mm |
1mm |
±.055mm |
±.06mm |
±.06mm |
1mm |
1.2mm |
±.06mm |
±.07mm |
±.07mm |
1.2mm |
1.5mm |
±.07mm |
±.08mm |
±.08mm |
1.5mm |
2.0mm |
±.08mm |
±.09mm |
±.10mm |
2.0mm |
2.5mm |
±.09mm |
±.10mm |
±.11mm |
2.5mm |
3mm |
±.11mm |
±.12mm |
±.12mm |
3mm |
4mm |
±.13mm |
±.14mm |
±.14mm |
4mm |
5mm |
±.14mm |
±.15mm |
±.15mm |
5mm |
6.5mm |
±.15mm |
±.15mm |
±.16mm |
6.5mm |
8mm |
±.16mm |
±.17mm |
±.17mm |
Possible Alternative Grades to 420 Stainless Steel Plate
Grade |
Reasons for choosing grade 420 |
410 |
Only a lower hardened strength is needed. |
416 |
High machinability is required, and the lower hardened strength and lower corrosion resistance of 416 is acceptable. |
440C |
A higher hardened strength or hardness than can be obtained from 420 is needed. |
"Specials" |
Variations of 420 are available to special order. These offer higher hardness, corrosion resistance and machinability for particular applications. |
Stainless Steel 420 Plate Processing
Stainless Steel 420 Plate Processing Options |
2 Plasma Cutting Tables |
Stainless Steel 420 plate can be plasma cut from 3/16″ thick thru 6.25″ thick. |
4 Dynamic Waterjet Tables |
Stainless Steel 420 plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 420 Plate. |
4 Kasto Plate Saws |
Stainless Steel 420 plate or bar from 1/2″ thick thru 22″ thick Stainless Steel 420 can be Kasto saw cut. |
1 plate laser |
Stainless Steel 420 sheet gauges thru 1-1/8″ thick Stainless Steel 420 plate can be laser cut. |
3 Plate Shears |
Stainless Steel 420 plate thru 3/4″ thick can be shear cut to size. |
Gauer Processing |
Stainless Steel 420 sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide. |
Machine Cutting |
Stainless Steel 420 rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter |
Stainless 420 Plate Leveling |
In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 420 Plate coil, thru 78.75″ wide (2 meter) |