Stainless Steel 347H Sheet is an austenitic stainless steel sheet which is slightly tougher than the 304 sheets. The chemical composition of the sheets has 17% nickel, 9% chromium, manganese, silicon, carbon, phosphorus, sulfur and the rest 68% iron. The SS 347H Sheets have high carbon content compared to the original 347 grade. The high carbon content increases the toughness but it also decreases the weldability of the AISI 347H Plate. Yet, the plates could be welded with the appropriate use of the filler materials. The material is strong with 205MPa minimum yield strength. The SUS 347H Plate has 480MPa minimum tensile strength and has high rupture strength. The elastic modulus, poisson’s ratio and elongation at break are all at good values for the SS UNS S34709 Plates. The hardness is at 187 in the Brinell hardness scale. Machining on this material is slightly tougher but it could be hardened by slow speeds, constant feeds and sharp tools.
The Stainless Steel 347H Plates can be hot worked and cold worked upon. The hot working can be done at 1149 degrees Celsius and upwards. The SS 347H Coils and strips are other forms of the sheets that are used in different applications. The material is annealed for strength and the annealing takes place above 1010 degrees Celsius temperature. The different products such as the SS 347H Circle might need a different set of working, machining, annealing and hardening of the products. There are cold rolled and hot rolled plates. The 347H Stainless Steel Hot Rolled Plates can also have different finishes such as perforated and electropolished. There are different standards and specifications to trade these plates internationally. The SS Werkstoff No 1.4961 Sheets belong to such a standard and we supply the materials according to the international standards. Please feel free to contact us for more information on the Stainless Steel 347H Cold Rolled Plates and their prices.
Table of Content - SS 347H Sheets Materials Selection And Specification - TP347H SS Coils Chemical Compatibility Chart - SUS 347H Plate Mechanical Characteristics - List Of Stainless Steel 347H Sheet Types - ASTM A240 SS 347H Plates Physical Properties - 347H Stainless Steel HR Sheets Thermal Properties - AISI 347H Plate Electrical Properties - Stainless Steel 347H Shim Sheets Material Equivalent - Stainless Steel 347H Sheets, Plates & Coils Finishes As Per ASTM A240M - Plain & Polished 347H Stainless Steel Sheet - Perforated Stainless Steel Sheet 347H - >Metric Dimensions of ASTM A240 Stainless Steel 347H Plate - ASTM A240 Stainless Steel 347H Plate Imperial Dimensions - Stainless Steel Sheets -Type 347H - Type 347H – Flattened - SS 347H Plate Weight Per Unit - 347H Stainless Steel Sheet Sizes - Stainless Steel 347H Sheet , Plate & Coil Thickness - SS 347H Sheet & Foil Thickness - 347H Stainless Steel Sheet Gauges - Stainless Steel 347H Plate Processing
Specifications | ASTM A240 / ASME SA240 |
Length | 2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc |
Thickness | 4 milimeter - 100 milimeter |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Width |
1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc |
Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
Grade | S | C | Cr | Mn | Cb | Si | Fe | P | Ni |
SS 347H | 0.030 | 0.04 – 0.10 | 17.00 – 20.00 | 2.0 | 8xC – 1.10 | 1.0 | 63.72 | 0.045 | 9.00 – 13.00 |
Density | Yield Strength | Melting Point | Elongation | Tensile Strength |
8.0 g/cm3 | Psi – 30000 , MPa – 205 | 1454 °C (2650 °F) | 35 % | Psi – 75000 , MPa – 515 |
Density lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Modules of Elasticity (annealed)2-psi | Specific Heat BTU/lbm -°F | |
---|---|---|---|---|---|
at 68 °F | at 68 – 1832°F | at 68 – 212°F | 68-932°F | in tension (E) | at 32 – 212°F |
0.288 | 11.4 | 9.2 | 14.7 | 28 x 106 | 0.12 |
Coefficient of thermal expansion ( x10-6 K-1 ) | 16-18 @ 20-100°C |
Maximum use temperature in air ( °C ) |
Electrical resistivity ( µOhm.cm ) | 70-73 |
STANDARD | BS | WERKSTOFF NR. | AFNOR | UNS | GOST | JIS | EN |
SS 347H | – | 1.4961 | – | S34709 | – | SUS 347H | X6CrNiNb18-12 |
Surface Finish | Definition | Application |
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
PRODUCT | FINISH | THICKNESS MM | MAX SHEET SIZE MM |
---|---|---|---|
Grade 347H | Plain 2B | 0.9 | 2000 x 1000 |
Bright | 0.9 | 2000 x 1000 | |
Brushed Finish | 0.9, 1.2 | 2000 x 1000, 2500 x 1250 | |
Rimex Super Mirror | 0.8, 1.2 | 2400 x 1200, 2500 x 1250 | |
Embossed | 0.8, 1.0 | 2500 x 1250 |
Hole Dia mm | Hole Centres mm | O/A | Finish | Tck mm | Full Sheet Size mm |
---|---|---|---|---|---|
0.75 | 1.5 | 23% | 2B | 0.6 | 2000 x 1000 |
1 | 2 | 23% | 2B | 1.0 | 2000 x 1000 |
1.5 | 2.6 | 30% | 2B | 1.0 | 2000 x 1000 |
2 | 3.5 | 30% | 2B | 1.0 | 2000 x 1000 |
2 | 3.5 | 30% | 2B | 1.0 | 2000 x 1000 |
3 | 5 | 33% | 2B | 1.0 | 2000 x 1000 |
4 | 5.6 | 46% | 2B | 1.0 | 2000 x 1000 |
5 | 8 | 35% | 2B | 1.0 | 2000 x 1000 |
6 | 8 | 51% | 2B | 1.0 | 2000 x 1000 |
8 | 10 | 58% | 2B | 1,0 | 2000 x 1000 |
Plate Surface finish | Thickness (mm) | Width (max mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
Plate Surface finish | Gauge (in) | Width (max in) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Polished plate (not brushed) | 11–24 | 60 |
Temper rolled plate Mexinox only | 13–29 | 48 |
Stainless Steel Gauge, Width and Length | Weight Lbs. per Sq Ft. |
Est. Wt. per Sheet |
---|---|---|
7GA (.1874") |
||
48 x 96 | 7.871 | 251.9 |
48 x 120 | 7.871 | 314.8 |
48 x 144 | 7.871 | 377.8 |
10GA (.135”) |
||
36 x 120 | 5.670 | 170.1 |
48 x 96 | 5.670 | 181.4 |
48 x 120 | 5.670 | 226.8 |
60 x 120* |
5.670 | 283.5 |
60 x 144* |
5.670 | 340.2 |
72 x 120* | 5.670 | 340.2 |
11 GA (.120") | ||
36 x 96 | 5.040 | 121.0 |
36 x 120 | 5.040 | 151.2 |
36 x 144 | 5.040 | 181.4 |
48 x 96 | 5.040 | 161.3 |
48 x 120 | 5.040 | 201.6 |
48 x 144 | 5.040 | 241.9 |
60 x 120 | 5.040 | 252.0 |
60 x 144 | 5.040 | 302.4 |
72 x 120* | 5.040 | 302.4 |
72 x 144* | 5.040 | 362.9 |
12 Ga. (.105") | ||
36 x 96 | 4.410 | 105.8 |
36 x 120 | 4.410 | 132.3 |
36 x 144 | 4.410 | 158.8 |
42 x 120 | 4.410 | 154.4 |
48 x 96 | 4.410 | 141.1 |
48 x 120 | 4.410 | 176.4 |
48 x 144 | 4.410 | 211.7 |
60 x 96 | 4.410 | 176.4 |
60 x 120 | 4.410 | 220.5 |
60 x 144 | 4.410 | 264.6 |
72 x 120* | 4.410 | 264.6 |
72 x 144 | 4.410 | 317.5 |
13 Ga (.090") | ||
36 x 96 | 3.780 | 90.72 |
36 x 120 | 3.780 | 113.4 |
48 x 120 | 3.780 | 151.2 |
14 Ga. (.075") | ||
30 x 120 | 3.150 | 78.75 |
36 x 96 | 3.150 | 75.60 |
36 x 120 | 3.150 | 94.50 |
36 x 144 | 3.150 | 113.4 |
42 x 120 | 3.150 | 110.3 |
42 x 144 | 3.150 | 132.3 |
48 x 96 | 3.150 | 100.8 |
48 x 120 | 3.150 | 126.0 |
48 x 144 | 3.150 | 151.2 |
60 x 120 | 3.150 | 157.5 |
60 x 144 | 3.150 | 189.0 |
72 x 120 | 3.150 | 189.0 |
72 x 144 | 3.150 | 226.8 |
16 Ga. (.060") | ||
30 x 96 | 2.520 | 50.40 |
30 x 120 | 2.520 | 63.00 |
36 x 96 | 2.520 | 60.48 |
36 x 120 | 2.520 | 75.60 |
36 x 144 | 2.520 | 90.72 |
42 x 120 | 2.520 | 88.20 |
48 x 96 | 2.520 | 80.64 |
48 x 120 | 2.520 | 100.8 |
48 x 144 | 2.520 | 121.0 |
60 x 96 | 2.520 | 100.8 |
60 x 120 | 2.520 | 126.0 |
60 x 144 | 2.520 | 151.2 |
18 Ga. (.048") | ||
30 x 96 | 2.016 | 40.32 |
30 x 120 | 2.016 | 50.40 |
36 x 96 | 2.016 | 48.38 |
36 x 120 | 2.016 | 60.48 |
36 x 144 | 2.016 | 72.58 |
42 x 120 | 2.016 | 70.56 |
48 x 96 | 2.016 | 64.51 |
48 x 120 | 2.016 | 80.64 |
48 x 144 | 2.016 | 96.77 |
60 x 120 | 2.016 | 100.8 |
60 x 144 | 2.016 | 121.0 |
19 Ga. (.042") | ||
36 x 120 | 1.764 | 52.92 |
20 Ga. (.036") | ||
30 x 96 | 1.512 | 30.24 |
30 x 120 | 1.512 | 37.80 |
36 x 96 | 1.512 | 36.29 |
36 x 120 | 1.512 | 45.36 |
36 x 144 | 1.512 | 54.43 |
42 x 120 | 1.512 | 52.92 |
48 x 96 | 1.512 | 48.38 |
48 x 120 | 1.512 | 60.48 |
48 x 144 | 1.512 | 72.58 |
22 Ga. (.030") | ||
30 x 96 | 1.260 | 25.20 |
30 x 120 | 1.260 | 61.50 |
36 x 96 | 1.260 | 30.24 |
36 x 120 | 1.260 | 37.80 |
36 x 144 | 1.260 | 45.36 |
48 x 96 | 1.260 | 40.32 |
48 x 120 | 1.260 | 50.40 |
24 Ga. (.024") | ||
30 x 96 | 1.008 | 20.16 |
30 x 120 | 1.008 | 25.20 |
36 x 96 | 1.008 | 24.19 |
36 x 120 | 1.008 | 30.24 |
48 x 96 | 1.008 | 32.26 |
48 x 120 | 1.008 | 40.32 |
26 Ga. (.018") | ||
30 x 96 | .7560 | 15.12 |
30 x 120 | .7560 | 18.90 |
36 x 96 | .7560 | 18.14 |
36 x 120 | .7560 | 22.68 |
48 x 96 | .7560 | 24.1 |
48 x 120 | .7560 | 30.24 |
28 Ga. (.015") | ||
36 x 96 | .630 | 15.12 |
36 x 120 | .630 | 18.90 |
Style Designation | Size in Inches | Wt. per Sq. Ft. in Lbs. | Wt. Per Sheet |
---|---|---|---|
3/4__9 | 48 x 96 | 1.95 | 62.4 |
1/2__13 | 48 x 96 | 1.78 | 56.9 |
1/2__16 | 48 x 96 | 0.86 | 27.5 |
1/2__18 | 48 x 96 | 0.69 | 22.1 |
1-1/2__9 | 48 x 96 | 1.31 | 41.9 |
3/4__13 | 48 x 96 | 0.86 | 27.5 |
3/4__16 | 48 x 96 | 0.57 | 18.2 |
3/4__18 | 48 x 96 | 0.46 | 14.7 |
1-1/2__13 | 48 x 96 | 0.65 | 20.8 |
Thickness | Plate Weight per Unit Area | Density |
---|---|---|
3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Sheet Thickness | Sheet Size | Sheet Weight per Unit Area | Estimated Weight per Sheet |
---|---|---|---|
0.0178 inches 0.45212 mm | 48 x 120 | 0.756 lbs/ft²3.690792 kg/m² | 30.24 lbs13.69872 kg |
0.02 inches 0.508 mm | 36 x 120 | 0.840 lbs/ft²4.10088 kg/m² | 25.20 lbs11.4156 kg |
0.02 inches 0.508 mm | 48 x 120 | 0.840 lbs/ft²4.10088 kg/m² | 33.60 lbs15.2208 kg |
0.0235 inches 0.5969 mm | 48 x 120 | 1.008 lbs/ft²4.921056 kg/m² | 42.32 lbs19.17096 kg |
0.0321 inches 0.81534 mm | 36 x 120 | 1.353 lbs/ft²6.605346 kg/m² | 40.58 lbs18.38274 kg |
0.0321 inches 0.81534 mm | 48 x 120 | 1.353 lbs/ft²6.605346 kg/m² | 54.10 lbs24.5073 kg |
0.0355 inches 9.017 mm | 48 x 96 | 1.512 lbs/ft²7.381584 kg/m² | 48.39 lbs21.92067 kg |
0.0355 inches 9.017 mm | 48 x 120 | 1.512 lbs/ft²7.381584 kg/m² | 60.49 lbs27.40197 kg |
0.042 inches 1.0668 mm | 36 x 120 | 1.764 lbs/ft²8.611848 kg/m² | 52.93 lbs23.97729 kg |
0.042 inches 1.0668 mm | 48 x 120 | 1.764 lbs/ft²8.611848 kg/m² | 70.57 lbs31.96821 kg |
0.048 inches 1.2192 mm | 36 x 120 | 2.016 lbs/ft²9.842112 kg/m² | 60.49 lbs27.40197 kg |
0.048 inches 1.2192 mm | 48 x 96 | 2.016 lbs/ft²9.842112 kg/m² | 64.52 lbs29.22756 kg |
0.048 inches 1.2192 mm | 48 x 120 | 2.016 lbs/ft²9.842112 kg/m² | 80.65 lbs36.53445 kg |
0.060 inches 1.524 mm | 36 x 96 | 2.520 lbs/ft²12.30264 kg/m² | 60.49 lbs27.40197 kg |
0.060 inches 1.524 mm | 36 x 120 | 2.520 lbs/ft²12.30264 kg/m² | 75.61 lbs34.25133 kg |
0.060 inches 1.524 mm | 48 x 120 | 2.520 lbs/ft²12.30264 kg/m² | 100.81 lbs45.66693 kg |
0.075 inches 1.905 mm | 48 x 120 | 3.150 lbs/ft²15.3783 kg/m² | 126.01 lbs57.08253 kg |
0.12 inches 3.0480 mm | 48 x 96 | 5.041 lbs/ft²24.610162 kg/m² | 161.30 lbs73.0689 kg |
0.12 inches 3.0480 mm | 48 x 120 | 5.041 lbs/ft²24.610162 kg/m² | 201.62 lbs91.33386 kg |
0.6 mm | 0.8 mm |
1.0 mm | 1.2 mm |
1.5 mm | 1.6 mm |
1.8 mm | 2.0 mm |
3.0 mm | 4.0 mm |
5.0 mm | 6.0 mm |
8.0 mm | 10.0 mm |
12.0 mm | 15.0 mm |
20.0 mm | 25.4 mm |
Thickness (in mm) | |
---|---|
0.004, Temper: As rolled | 0.2, Temper: Annealed |
0.005, Temper: As rolled | 0.2, Temper: Half hard |
0.0065, Temper: As rolled | 0.25, Temper: Annealed |
0.0076, Temper: As rolled | 0.25, Temper: Half hard |
0.01, Temper: As rolled | 0.30, Coil width: 15.5, Temper: Half hard |
0.02, Temper: As rolled | 0.38, Temper: Annealed |
0.02, Temper: Half hard | 0.5, Temper: Half hard |
0.025, Temper: As rolled, Condition: Surface oxide | 0.75, Temper: Half hard |
0.025, Temper: As rolled | 1.0, Temper: Annealed |
0.05, Temper: Half hard | 2.0, Temper: 1/4 Hard |
0.05, Temper: Quarter hard | 2.0, Temper: Half hard |
0.075, Temper: Half hard | 3.0, Temper: Annealed |
0.1, Temper: Half hard | 3.0, Temper: 1/4 Hard |
0.1, Coil width: 10, Temper: Half hard | 6.35, Temper: Hard |
0.125, Temper: Half hard | 0.15, Coil width: 0.3, Temper: Half hard |
0.15, Temper: Half hard |
NOMINAL DECIMAL | STANDARD VARIANCE FROM | |
---|---|---|
SHEET METAL GAUGE | (APPROXIMATE INCHES) | NOMINAL DECIMAL (+/- INCHES) |
7 | 0.1793 | 0.0080 |
8 | 0.1644 | 0.0080 |
9 | 0.1495 | 0.0080 |
10 | 0.1345 | 0.0070 |
11 | 0.1196 | 0.0050 |
12 | 0.1046 | 0.0050 |
13 | 0.0897 | 0.0050 |
14 | 0.0747 | 0.0040 |
15 | 0.0673 | 0.0040 |
16 | 0.0598 | 0.0030 |
17 | 0.0538 | 0.0030 |
18 | 0.0478 | 0.0030 |
19 | 0.0418 | 0.0030 |
20 | 0.0359 | 0.0030 |
21 | 0.0329 | 0.0025 |
22 | 0.0299 | 0.0020 |
23 | 0.0269 | 0.0020 |
24 | 0.0239 | 0.0020 |
25 | 0.0209 | 0.0015 |
26 | 0.0179 | 0.0015 |
28 | 0.0149 | 0.0010 |
Grades | Thickness | Availability |
347H Stainless Steel Sheets | .012 | √ |
347H Sheets Stainless Steel | .016 | √ |
347H Stainless Sheets | .020 | √ |
SS 347H Sheets | .025 | √ |
347H SS Sheets | .032 | √ |
Aisi 347H Sheets | .040 | √ |
Din 1.4005 Sheets | .050 | √ |
UNS S41600 Sheets | .063 | √ |
Alloy 347H Sheets | .071 | √ |
AMS 5645 Sheets | .080 | √ |
AMS 5510 Sheets | .090 | √ |
347H SS Sheets | .100 | √ |
Aisi 347H Sheets | .125 | √ |
Stainless Steel 347H Plate Processing Options | |
---|---|
2 Plasma Cutting Tables | Stainless Steel 347H plate can be plasma cut from 3/16″ thick thru 6.25″ thick. |
4 Dynamic Waterjet Tables | Stainless Steel 347H plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 347H Plate. |
4 Kasto Plate Saws | Stainless Steel 347H plate or bar from 1/2″ thick thru 22″ thick Stainless Steel 347H can be Kasto saw cut. |
1 plate laser | Stainless Steel 347H sheet gauges thru 1-1/8″ thick Stainless Steel 347H plate can be laser cut. |
3 Plate Shears | Stainless Steel 347H plate thru 3/4″ thick can be shear cut to size. |
Gauer Processing | Stainless Steel 347H sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide. |
Machine Cutting | Stainless Steel 347H rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter |
Stainless 347H Plate Leveling | In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 347H Plate coil, thru 78.75″ wide (2 meter) |