Check Availability Of SS 310 Sheets, AISI 310 Plate

Stainless Steel 310 Sheet is made up of a medium carbon austenitic stainless steel. The material is suitable for high temperature services such as furnaces. Suryadeep Industry is a leading manufacturer and supplier of the SS 310 Sheets in different scales and quantities. The material can operate up to 1150 degrees Celsius for continuous services. The AISI 310 Plate can operate under 1035 degrees Celsius of temperature for intermittent services. There are low carbon versions and high carbon versions of the same material. The Stainless Steel 310 Plates are used in applications including fuidised bed combustors, refractory anchor bolts, burners, furnace parts and in petroleum and steam boilers. The high temperature tolerant 310 Stainless Steel Hot Rolled Plates are made up of 25% chromium and 20% nickel in the composition. This makes the material resistant to oxidation and corrosion.

The finishing of the material adds to the oxidation resistance as well. There are 310 SS Chequered Plate types and other polished finish types as well. The SS 310 Perforated Sheets are unique in that they allow for aeration and reduce the weight of the sheet. There are different forms of the sheet such as the Stainless Steel 310 Coils, foils, rolls and strips. The material is composed of carbon, manganese, phosphorus, silicon and sulfur in addition to the chromium and nickel. The Stainless Steel 310 Slatting Coils are strong with minimum yield strength of 205MPa and minimum tensile strength of 520MPa.  It is also hard with HV max scale of 225. The SS 310 Plate can also be welded with ease and can be formed well. Machining is also possible on this material. Please contact us for ASME SA240 Stainless Steel 310 Coils and other types of 310 stainless steel products.

SS 310 Sheets Standards And Specifications

Specifications	ASTM A240 / ASME SA240
Length	2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness	4 milimeter - 100 milimeter
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width	1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

Specification Of Stainless Steel 310 Plates, Buy SS UNS S31000 Sheets At Best Price In Bhopal, India.

SS SUS 310 Sheets Chemical Composition Standard

Grade	S	C	Mo	Mn	Cr	Si	Ni	P	N
SS 310	0.015 max	0.015 max	0.10 max	2 max	24.00 – 26.00	0.015 max	19.00 – 21.00	0.020 max	54.7 min

AISI 310 Plate Mechanical Properties Chart

Refer 310 Stainless Steel Hot Rolled Plates Chemical Requirements, 310 SS Chequered Plate Mechanical Requirements, Best offer on bulk SS TP310 Sheets stock.

Density	Yield Strength (0.2%Offset)	Melting Point	Elongation	Tensile Strength
7.9 g/cm3	Psi – 30000 , MPa – 205	1402 °C (2555 °F)	40 %	Psi – 75000 , MPa – 515

List Of Stainless Steel 310 Sheet Types

Equivalent Material Of SS 310 Perforated Sheets

Get SS SUS 310 Sheets At Best Price, Equivalent Grade Of SS 310 Perforated Sheets, Stainless Steel 310 Sheet, We provide 1.4841 Plates Expert Cutting Service In Bhopal, India.

STANDARD	BS	WERKSTOFF NR.	GOST	UNS	AFNOR	JIS	EN
SS 310	310S24	1.4841	20Ch25N20S2	S31000	–	SUS 310	X15CrNi25-20

Stainless Steel 310 Plates Thickness

Hot rolled AISI 310 thick plate	20-60 milimeter
Cold rolled Stainless Steel 310 1.4845 thin plate	0.2-4 milimeter
Hot rolled ASTM A240 TP 310 extra thick plate	60-115 milimeter
Hot rolled 310 SS medium plate	4-20 milimeter

310 SS Chequered Plate Physical Properties

Contact us today for buy Stainless Steel 310 Coils In India, Refer Stainless Steel 310 Slatting Coils And SS 310 Plate Chart, Physical Properties Of ASME SA240 Stainless Steel 310 Coils.

Grade	Thermal Conductivity(W/m.K)		Density (kg/m3)	Mean Coefficient of Thermal Expansion (μm/m/°C)			Elastic Modulus (GPa)	Specific Heat 0-100°C (J/kg.K)	Electrical Resistivity (nΩ.m)
	at 100°C	at 500°C		0-100°C	0-315°C	0-538°C
310/S	14.2	18.7	7750	15.9	16.2	17.0	200	500	720

310 Stainless Steel Plate Possible Alternative Grades

Grade	Why it might be chosen instead of 310
3CR12	Heat resistance is needed, but only to about 600°C.
304H	Heat resistance is needed, but only to about 800°C.
321	Heat resistance is needed, but only to about 900°C. Subsequent aqueous corrosion resistance also required.
253MA (2111HTR)	A slightly higher temperature resistance is needed than can be provided by 310. Better resistance to reducing sulphide atmosphere needed. Higher immunity from sigma phase embrittlement is required.

Stainless Steel 310 Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe

ASTM A240 Stainless Steel 310 Plate Melting Range

Plate Type	Melting Point
Stainless Steel 310 Plate	1402 °C (2555 °F)

ASME SA240 Stainless Steel 310 Plate Density

Plate Type	Density
Stainless Steel 310 Plate	7.9 g/cm3

Plain & Polished 310 Stainless Steel Sheet

PRODUCT	FINISH	THICKNESS MM	MAX SHEET SIZE MM
Grade 310	Plain 2B	0.9	2000 x 1000
	Bright	0.9	2000 x 1000
	Brushed Finish	0.9, 1.2	2000 x 1000, 2500 x 1250
	Rimex Super Mirror	0.8, 1.2	2400 x 1200, 2500 x 1250
	Embossed	0.8, 1.0	2500 x 1250

circle cutting in ss Grade 310 perforated sheets up to 1000mm diameter

Hole Dia mm	Hole Centres mm	O/A	Finish	Tck mm	Full Sheet Size mm
0.75	1.5	23%	2B	0.6	2000 x 1000
1	2	23%	2B	1.0	2000 x 1000
1.5	2.6	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
3	5	33%	2B	1.0	2000 x 1000
4	5.6	46%	2B	1.0	2000 x 1000
5	8	35%	2B	1.0	2000 x 1000
6	8	51%	2B	1.0	2000 x 1000
8	10	58%	2B	1,0	2000 x 1000

ASTM A240 Stainless Steel 310 Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

ASTM A240 Stainless Steel 310 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

Stainless Steel Sheets -Type 310 | No. 2B Finish — Cold Rolled, Annealed

Stainless Steel Gauge, Width and Length	Weight Lbs. per Sq Ft.	Est. Wt. per Sheet
7GA (.1874")
48 x 96	7.871	251.9
48 x 120	7.871	314.8
48 x 144	7.871	377.8
10GA (.135”)
36 x 120	5.670	170.1
48 x 96	5.670	181.4
48 x 120	5.670	226.8
60 x 120*	5.670	283.5
60 x 144*	5.670	340.2
72 x 120*	5.670	340.2
11 GA (.120")
36 x 96	5.040	121.0
36 x 120	5.040	151.2
36 x 144	5.040	181.4
48 x 96	5.040	161.3
48 x 120	5.040	201.6
48 x 144	5.040	241.9
60 x 120	5.040	252.0
60 x 144	5.040	302.4
72 x 120*	5.040	302.4
72 x 144*	5.040	362.9
12 Ga. (.105")
36 x 96	4.410	105.8
36 x 120	4.410	132.3
36 x 144	4.410	158.8
42 x 120	4.410	154.4
48 x 96	4.410	141.1
48 x 120	4.410	176.4
48 x 144	4.410	211.7
60 x 96	4.410	176.4
60 x 120	4.410	220.5
60 x 144	4.410	264.6
72 x 120*	4.410	264.6
72 x 144	4.410	317.5
13 Ga (.090")
36 x 96	3.780	90.72
36 x 120	3.780	113.4
48 x 120	3.780	151.2
14 Ga. (.075")
30 x 120	3.150	78.75
36 x 96	3.150	75.60
36 x 120	3.150	94.50
36 x 144	3.150	113.4
42 x 120	3.150	110.3
42 x 144	3.150	132.3
48 x 96	3.150	100.8
48 x 120	3.150	126.0
48 x 144	3.150	151.2
60 x 120	3.150	157.5
60 x 144	3.150	189.0
72 x 120	3.150	189.0
72 x 144	3.150	226.8
16 Ga. (.060")
30 x 96	2.520	50.40
30 x 120	2.520	63.00
36 x 96	2.520	60.48
36 x 120	2.520	75.60
36 x 144	2.520	90.72
42 x 120	2.520	88.20
48 x 96	2.520	80.64
48 x 120	2.520	100.8
48 x 144	2.520	121.0
60 x 96	2.520	100.8
60 x 120	2.520	126.0
60 x 144	2.520	151.2
18 Ga. (.048")
30 x 96	2.016	40.32
30 x 120	2.016	50.40
36 x 96	2.016	48.38
36 x 120	2.016	60.48
36 x 144	2.016	72.58
42 x 120	2.016	70.56
48 x 96	2.016	64.51
48 x 120	2.016	80.64
48 x 144	2.016	96.77
60 x 120	2.016	100.8
60 x 144	2.016	121.0
19 Ga. (.042")
36 x 120	1.764	52.92
20 Ga. (.036")
30 x 96	1.512	30.24
30 x 120	1.512	37.80
36 x 96	1.512	36.29
36 x 120	1.512	45.36
36 x 144	1.512	54.43
42 x 120	1.512	52.92
48 x 96	1.512	48.38
48 x 120	1.512	60.48
48 x 144	1.512	72.58
22 Ga. (.030")
30 x 96	1.260	25.20
30 x 120	1.260	61.50
36 x 96	1.260	30.24
36 x 120	1.260	37.80
36 x 144	1.260	45.36
48 x 96	1.260	40.32
48 x 120	1.260	50.40
24 Ga. (.024")
30 x 96	1.008	20.16
30 x 120	1.008	25.20
36 x 96	1.008	24.19
36 x 120	1.008	30.24
48 x 96	1.008	32.26
48 x 120	1.008	40.32
26 Ga. (.018")
30 x 96	.7560	15.12
30 x 120	.7560	18.90
36 x 96	.7560	18.14
36 x 120	.7560	22.68
48 x 96	.7560	24.1
48 x 120	.7560	30.24
28 Ga. (.015")
36 x 96	.630	15.12
36 x 120	.630	18.90

Type 310 – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation	Size in Inches	Wt. per Sq. Ft. in Lbs.	Wt. Per Sheet
3/4__9	48 x 96	1.95	62.4
1/2__13	48 x 96	1.78	56.9
1/2__16	48 x 96	0.86	27.5
1/2__18	48 x 96	0.69	22.1
1-1/2__9	48 x 96	1.31	41.9
3/4__13	48 x 96	0.86	27.5
3/4__16	48 x 96	0.57	18.2
3/4__18	48 x 96	0.46	14.7
1-1/2__13	48 x 96	0.65	20.8

SS 310 Plate Weight Per Unit

Thickness	Plate Weight per Unit Area	Density
3/16 inches	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

SS UNS S31000 Plate Sizes

Size (in Inches)		Size (in mm)
.125"	.875"	3.18	22.2
.134"	1"	3.40	25.4
.156"	1.125"	3.96	28.6
.187"	1.250"	4.75	31.8
.250"	1.500"	6.35	38.1
.312"	1.750"	7.92	44.5
.375"	2"	9.53	50.8
.500"	2.500"	12.7	63.5
.625"	3"	15.9	76.2
.750"		19.1

Stainless Steel 310 Sheet , Plate & Coil Thickness

0.6 mm	0.8 mm
1.0 mm	1.2 mm
1.5 mm	1.6 mm
1.8 mm	2.0 mm
3.0 mm	4.0 mm
5.0 mm	6.0 mm
8.0 mm	10.0 mm
12.0 mm	15.0 mm
20.0 mm	25.4 mm

Thickness (in mm)
0.004, Temper: As rolled	0.2, Temper: Annealed
0.005, Temper: As rolled	0.2, Temper: Half hard
0.0065, Temper: As rolled	0.25, Temper: Annealed
0.0076, Temper: As rolled	0.25, Temper: Half hard
0.01, Temper: As rolled	0.30, Coil width: 15.5, Temper: Half hard
0.02, Temper: As rolled	0.38, Temper: Annealed
0.02, Temper: Half hard	0.5, Temper: Half hard
0.025, Temper: As rolled, Condition: Surface oxide	0.75, Temper: Half hard
0.025, Temper: As rolled	1.0, Temper: Annealed
0.05, Temper: Half hard	2.0, Temper: 1/4 Hard
0.05, Temper: Quarter hard	2.0, Temper: Half hard
0.075, Temper: Half hard	3.0, Temper: Annealed
0.1, Temper: Half hard	3.0, Temper: 1/4 Hard
0.1, Coil width: 10, Temper: Half hard	6.35, Temper: Hard
0.125, Temper: Half hard	0.15, Coil width: 0.3, Temper: Half hard
0.15, Temper: Half hard

310 Stainless Steel Sheet Gauges

	NOMINAL DECIMAL	STANDARD VARIANCE FROM
SHEET METAL GAUGE	(APPROXIMATE INCHES)	NOMINAL DECIMAL  (+/- INCHES)
7	0.1793	0.0080
8	0.1644	0.0080
9	0.1495	0.0080
10	0.1345	0.0070
11	0.1196	0.0050
12	0.1046	0.0050
13	0.0897	0.0050
14	0.0747	0.0040
15	0.0673	0.0040
16	0.0598	0.0030
17	0.0538	0.0030
18	0.0478	0.0030
19	0.0418	0.0030
20	0.0359	0.0030
21	0.0329	0.0025
22	0.0299	0.0020
23	0.0269	0.0020
24	0.0239	0.0020
25	0.0209	0.0015
26	0.0179	0.0015
28	0.0149	0.0010

Effect Of Exposure At 480 – 650º On Room Temperature Toughness And Hardness

Temperature °C	Exposure Time
	1,000 hours		10,000 hours
	Charpy Impact	Hardness	Charpy Impact	Hardness
	J	HB	J	HB
Unexposed	102	124	102	124
480		119	84	152
565	65	119	39	174
650	39	130	3	269

Stainless Steel 310 Plate Processing

Stainless Steel 310 Plate Processing Options
2 Plasma Cutting Tables	Stainless Steel 310 plate can be plasma cut from 3/16″ thick thru 6.25″ thick.
4 Dynamic Waterjet  Tables	Stainless Steel 310 plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 310 Plate.
4 Kasto Plate Saws	Stainless Steel 310 plate or bar from 1/2″ thick thru 22″ thick Stainless Steel 310 can be Kasto saw cut.
1 plate laser	Stainless Steel 310 sheet gauges thru 1-1/8″ thick Stainless Steel 310 plate can be laser cut.
3 Plate Shears	Stainless Steel 310 plate thru 3/4″ thick can be shear cut to size.
Gauer Processing	Stainless Steel 310 sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Machine Cutting	Stainless Steel 310 rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter
Stainless 310 Plate Leveling	In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 310 Plate coil, thru 78.75″ wide (2 meter)