Get Free Quote Of AISI 316 Sheet, Stainless Steel 316 Plates

Stainless Steel 316 Sheet is an austenitic stainless steel plate that is corrosion resistant to most general corrosive services. It is particularly resistant to chloride ion stress corrosion cracking. The Stainless Steel 316 Plates are made up of iron, carbon, chromium, nickel, molybdenum, manganese, silicon, phosphorus and sulfur. The addition of molybdenum to the composition of SS 316 Sheets makes them corrosion resistant against salt waters. The material also has less pitting and crevice corrosion attacks. The AISI 316 Plate is used in the architectural, pharmaceutical, chemical, food processing, transportation and in the petrochemical industries. The Stainless Steel 316 Slatting Coil a form of the plates that is used in high temperature services. The material could be either cold rolled or 316 Stainless Steel Hot Rolled Plates and can undergo different heat treatment techniques to further strengthen the material.

The minimum yield strength of the material is 205MPa and the minimum tensile strength of the material is 515MPa. So the 316 SS Chequered Plate has equal strength to that of the 304 materials but with higher corrosion resistance properties. The material has different finishes such as the SS 316 Perforated Sheets which are needed for specific applications. The material also has the same density as the 304 material and the same operating temperature range. The 316 Stainless Steel Sheet can operate up to 925 degrees Celsius for continuous services and up to 870 degrees Celsius for intermittent services. The Grade 316 Stainless Steel Plate can be seen in laboratory benches, boat fittings, heat exchangers, food preparation equipment, springs and in coastal architectural paneling. Please contact us for more details on the Stainless Steel 316 Shim Sheets and other 316 sheet products.

SS 316 Sheets Specification And Grade

Specifications	ASTM A240 / ASME SA240
Length	2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness	4 milimeter - 100 milimeter
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width	1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

Suppliers Of SS 316 Sheets In Bhopal, India, Stainless Steel 316 Slatting Coil Specification, Buy Large Diameter 316 Stainless Steel Hot Rolled Plates At Factory Price.

Stainless Steel 316 Shim Sheets Chemical Structure

Grade	S	C	Mo	Mn	Ni	Si	N	P	Cr
SS 316	0.030	0.08	2.00 – 3.00	2	11.00 – 14.00	1.0	67.845	0.045	16.00 – 18.00

SUS 316 Sheet Mechanical Behaviour

Chemical And Mechanical Composition Of 316 SS Chequered Plate, SS 316 Perforated Sheets Stockist In India, Check Our Global Sales Network For SS 316 Plates.

Grade	Tensile Strength	Density	Yield Strength (0.2%Offset)	Melting Point	Elongation
SS 316	Psi – 75000 , MPa – 515	8.0 g/cm3	Psi – 30000 , MPa – 205	1400 °C (2550 °F)	35 %

List Of Stainless Steel 316 Sheet Types

Equivalent Material Of SS 316 Perforated Sheets

Grade Equivalent Of 316 SS Coils, Types Of 316 Stainless Steel Sheet, Stainless Steel 316 Sheet, Lowest Price Of Bulk SUS 316 Sheet stock.

STANDARD	GOST	WERKSTOFF NR.	AFNOR	UNS	BS	JIS	EN
SS 316	–	1.4401	Z7CND17‐11‐02	S31600	316S31	SUS 316	X5CrNiMo17-12-2

Long way of diamond runs parallel to length of sheet

Refer Stainless Steel 316 Slatting Coils Dimensions And ASTM A240 316-2B Stainless Steel Sheet Length, Looking to buy SS Grade 316 Polished Plates? contact Suryadeep Industry, A Reliable Stainless Steel 316 Shim Sheets Manufacturer in India

Style Designation	Wt. per Sq. Ft. in Lbs.	Size in Inches	Wt. Per Sheet
3/4__9	1.95	48 x 96	62.4
1/2__13	1.78	48 x 96	56.9
1/2__16	0.86	48 x 96	27.5
1/2__18	0.69	48 x 96	22.1
1-1/2__9	1.31	48 x 96	41.9
3/4__13	0.86	48 x 96	27.5
3/4__16	0.57	48 x 96	18.2
3/4__18	0.46	48 x 96	14.7
1-1/2__13	0.65	48 x 96	20.8

Stainless Steel 316 Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe

ASME SA240 Stainless Steel 316 Plate Density

Plate Type	Density
Stainless Steel 316 Plate	8000 g/cm3

ASTM A240 Stainless Steel 316 Plate Melting Range

Plate Type	Melting Point
Stainless Steel 316 Plate	1400 °C (2550 °F)

Perforated Stainless Steel Sheet 316

Hole Centres in mm	Hole Diameter in mm	Finish	Full Sheet Size in mm	Tck in mm	O/A
1.5	0.75	2B	2000 x 1000	0.6	23%
2	1	2B	2000 x 1000	1.0	23%
2.6	1.5	2B	2000 x 1000	1.0	30%
3.5	2	2B	2000 x 1000	1.0	30%
3.5	2	2B	2000 x 1000	1.0	30%
5	3	2B	2000 x 1000	1.0	33%
5.6	4	2B	2000 x 1000	1.0	46%
8	5	2B	2000 x 1000	1.0	35%
8	6	2B	2000 x 1000	1.0	51%
10	8	2B	2000 x 1000	1,0	58%

Plain & Polished 316 Stainless Steel Sheet

Type	THICKNESS MM	PLATE FINISH	MAX SHEET SIZE MM
Grade 316	0.8, 1.0	Embossed	2500 x 1250
	0.9	Bright	2000 x 1000
	0.9, 1.2	Brushed Finish	2000 x 1000, 2500 x 1250
	0.9	Plain 2B	2000 x 1000
	0.8, 1.2	Rimex Super Mirror	2400 x 1200, 2500 x 1250

Metric Dimensions of ASTM A240 Stainless Steel 316 Plate

Surface finish	Width maximum in mm	Thickness in mm
Polished, brushed plate	1524	0.5–4.0
2B – Cold rolled, heat treated, pickled, skin passed plate	2032	0.25–8.0
2D – Cold rolled, heat treated, pickled plate	1524	0.4–6.35
2H – Work hardened plate	1524	0.4–6.35
2R – Cold rolled, bright annealed plate	1524	0.25–3.5
2E – Cold rolled, heat treated, mechanically descaled plate	2032	0.4–8.0

ASTM A240 Stainless Steel 316 Plate Imperial Dimensions

Surface finish	Width maximum in	Gauge in
Temper rolled plate Mexinox only	48	13–29
Polished plate (not brushed)	60	11–24
2D – Cold rolled, heat treated, pickled plate	60	12–24
2B – Cold rolled, heat treated, pickled, skin passed Plate	72*	10–24
BA Mexinox only	48	18–28

Cold Rolled, Annealed Type 316 Stainless Steel Sheets

Stainless Steel Sheets Sizes & Weight Chart	Weight Lbs. per Sq Ft.	Width and Length	Est. Wt. per Sheets
		7GA (.1874")
AMS 5524 Sheets	7.871	48 x 120	314.8
316 Stainless Steel Sheets	7.871	48 x 96	251.9
Sae Ams 5524 Sheets	7.871	48 x 144	377.8
		10GA (.135”)
Ams 5524 Stainless Steel Sheets	5.670	36 x 120	170.1
316 Ams 5524 Sheets	5.670	48 x 96	181.4
Aisi 316 Ams 5524 Sheets	5.670	48 x 120	226.8
Cres 316 Ams 5524 Sheets	5.670	60 x 120*	283.5
Aisi Stainless Steel 316 Sheets	5.670	60 x 144*	340.2
316 Stainless Steel Sheets	5.670	72 x 120*	340.2
		11 GA (.120")
316 Stainless Sheets	5.040	36 x 96	121.0
316 Stainless Sheets	5.040	36 x 120	151.2
Aisi 316 Sheets	5.040	36 x 144	181.4
Alloy 316 Sheets	5.040	48 x 96	161.3
316 SS Sheets	5.040	48 x 120	201.6
Aisi 316 SS Sheets	5.040	48 x 144	241.9
Alloy 316L Sheets	5.040	60 x 120	252.0
316 SS Sheets	5.040	60 x 144	302.4
316l Ams 5507 Sheets	5.040	72 x 120*	302.4
316 SS Sheets	5.040	72 x 144*	362.9
		12 Ga. (.105")
316 SS Sheets	4.410	36 x 96	105.8
AMS 5524 Sheets	4.410	36 x 120	132.3
Sae Ams 5524 Sheets	4.410	36 x 144	158.8
Ams 5524 SS Sheets	4.410	42 x 120	154.4
316 Ams 5524 Sheets	4.410	48 x 96	141.1
Aisi 316 Ams 5524 Sheets	4.410	48 x 120	176.4
Cres 316 Ams 5524 Sheets	4.410	48 x 144	211.7
Aisi SS 316 Sheets	4.410	60 x 96	176.4
316 SS Sheets	4.410	60 x 120	220.5
SS 316 Stainless Sheets	4.410	60 x 144	264.6
316 Stainless Sheets	4.410	72 x 120*	264.6
Aisi 316 Sheets	4.410	72 x 144	317.5
		13 Ga (.090")
Alloy 316 Sheets	3.780	36 x 96	90.72
316 SS Sheets	3.780	36 x 120	113.4
Aisi 316 SS Sheets	3.780	48 x 120	151.2
		14 Ga. (.075")
Alloy 316L Sheets	3.150	30 x 120	78.75
316 SS Sheets	3.150	36 x 96	75.60
316l Ams 5507 Sheets	3.150	36 x 120	94.50
316 SS Sheets	3.150	36 x 144	113.4
316 SS Sheets	3.150	42 x 120	110.3
AMS 5524 Sheets	3.150	42 x 144	132.3
Sae Ams 5524 Sheets	3.150	48 x 96	100.8
Ams 5524 SS Sheets	3.150	48 x 120	126.0
316 Ams 5524 Sheets	3.150	48 x 144	151.2
Aisi 316 Ams 5524 Sheets	3.150	60 x 120	157.5
Cres 316 Ams 5524 Sheets	3.150	60 x 144	189.0
Aisi SS 316 Sheets	3.150	72 x 120	189.0
316 SS Sheets	3.150	72 x 144	226.8
		16 Ga. (.060")
SS 316 Stainless Sheets	2.520	30 x 96	50.40
316 Stainless Sheets	2.520	30 x 120	63.00
Aisi 316 Sheets	2.520	36 x 96	60.48
Alloy 316 Sheets	2.520	36 x 120	75.60
316 SS Sheets	2.520	36 x 144	90.72
Aisi 316 SS Sheets	2.520	42 x 120	88.20
Alloy 316L Sheets	2.520	48 x 96	80.64
316 SS Sheets	2.520	48 x 120	100.8
316l Ams 5507 Sheets	2.520	48 x 144	121.0
316 SS Sheets	2.520	60 x 96	100.8
AMS 5524 Sheets	2.520	60 x 120	126.0
Sae Ams 5524 Sheets	2.520	60 x 144	151.2
		18 Ga. (.048")
Ams 5524 SS Sheets	2.016	30 x 96	40.32
316 Ams 5524 Sheets	2.016	30 x 120	50.40
Aisi 316 Ams 5524 Sheets	2.016	36 x 96	48.38
Cres 316 Ams 5524 Sheets	2.016	36 x 120	60.48
Aisi SS 316 Sheets	2.016	36 x 144	72.58
316 SS Sheets	2.016	42 x 120	70.56
SS 316 Stainless Sheets	2.016	48 x 96	64.51
316 Stainless Sheets	2.016	48 x 120	80.64
Aisi 316 Sheets	2.016	48 x 144	96.77
Alloy 316 Sheets	2.016	60 x 120	100.8
316 SS Sheets	2.016	60 x 144	121.0
		19 Ga. (.042")
Alloy 316L Sheets	1.764	36 x 120	52.92
		20 Ga. (.036")
316l Ams 5507 Sheets	1.512	30 x 96	30.24
Aisi 316 SS Sheets	1.512	30 x 120	37.80
316 SS Sheets	1.512	36 x 96	36.29
AMS 5524 Sheets	1.512	36 x 120	45.36
Sae Ams 5524 Sheets	1.512	36 x 144	54.43
	1.512	42 x 120	52.92
Ams 5524 SS Sheets	1.512	48 x 96	48.38
316 Ams 5524 Sheets	1.512	48 x 120	60.48
Aisi 316 Ams 5524 Sheets	1.512	48 x 144	72.58
		22 Ga. (.030")
Aisi SS 316 Sheets	1.260	30 x 96	25.20
316 SS Sheets	1.260	30 x 120	61.50
	1.260	36 x 96	30.24
316 Stainless Sheets	1.260	36 x 120	37.80
316 Stainless Sheets	1.260	36 x 144	45.36
Aisi 316 Sheets	1.260	48 x 96	40.32
Alloy 316 Sheets	1.260	48 x 120	50.40
		24 Ga. (.024")
Aisi 316 SS Sheets	1.008	30 x 96	20.16
Alloy 316L Sheets	1.008	30 x 120	25.20
316 SS Sheets	1.008	36 x 96	24.19
316l Ams 5507 Sheets	1.008	36 x 120	30.24
Cres 316 Ams 5524 Sheets	1.008	48 x 96	32.26
316 SS Sheets	1.008	48 x 120	40.32
		26 Ga. (.018")
316 SS Sheets	.7560	30 x 96	15.12
AMS 5524 Sheets	.7560	30 x 120	18.90
Sae Ams 5524 Sheets	.7560	36 x 96	18.14
Aisi 316 Ams 5524 Sheets	.7560	36 x 120	22.68
Ams 5524 SS Sheets	.7560	48 x 96	24.1
316 Ams 5524 Sheets	.7560	48 x 120	30.24
		28 Ga. (.015")
Cres 316 Ams 5524 Sheets	.630	36 x 96	15.12
Aisi SS 316 Sheets	.630	36 x 120	18.90

Type 316 – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Expanded Aisi 316 Sheet Style Designation	Wt. Per Sheet	Wt. per Sq. Ft. in Lbs.	Size in Inches
Aisi 316 Ams 5648 Sheet	1.95	48 x 96	3/4__9	62.4
316 Ams 5648 Sheet	1.78	48 x 96	1/2__13	56.9
Stainless Steel 316 / 316L Sheet	0.86	48 x 96	1/2__16	27.5
Sae Ams 5524 Sheet	0.69	48 x 96	1/2__18	22.1
Stainless Steel 316 Sheet	1.31	48 x 96	1-1/2__9	41.9
AMS 5524 Sheet	0.86	48 x 96	3/4__13	27.5
316 Ams 5524 Sheet	0.57	48 x 96	3/4__16	18.2
Aisi 316 Ams 5524 Sheet	0.46	48 x 96	3/4__18	14.7
Ams 5524 Stainless Steel Sheet	0.65	48 x 96	1-1/2__13	20.8

SS 316 Plate Weight Per Unit

Weight of plate per kg	Size in MM	Weight of plate per kg	Size in MM
136.0	4000 x 2000 x 2.0	191.0	3000 x 1500 x 5.0
204.0	4000 x 2000 x 3.0	340.0	4000 x 2000 x 5.0
106.0	2500 x 1250 x 4.0	159.0	2500 x 1250 x 6.0
153.0	3000 x 1500 x 4.0	230.0	3000 x 1500 x 6.0
272.0	4000 x 2000 x 4.0	408.0	4000 x 2000 x 6.0
133.0	2500 x 1250 x 5.0

   

Weight of plate per kg	Size in MM	Weight of plate per kg	Size in MM
51.0	2000 x 1000 x 3.0	408.0	4000 x 2000 x 6.0
79.7	2500 x 1250 x 3.0	213.0	2500 x 1250 x 8.0
115.0	3000 x 1500 x 3.0	306.0	3000 x 1500 x 8.0
68.0	2000 x 1000 x 4.0	544.0	4000 x 2000 x 8.0
106.0	2500 x 1250 x 4.0	266.0	2500 x 1250 x 10.0
153.0	3000 x 1500 x 4.0	383.0	3000 x 1500 x 10.0
85.0	2000 x 1000 x 5.0	510.0	4000 x 1500 x 10.0
133.0	2500 x 1250 x 5.0	680.0	4000 x 2000 x 10.0
191.0	3000 x 1500 x 5.0	319.0	2500 x 1250 x 12.0
340.0	4000 x 2000 x 5.0	459.0	3000 x 1500 x 12.0
102.0	2000 x 1000 x 6.0	612.0	4000 x 1500 x 12.0
159.0	2500 x 1250 x 6.0	816.0	4000 x 2000 x 12.0
230.0	3000 x 1500 x 6.0

 

Unit Weight per kg of plate	Thickness of plate on base in MM
78.0	3000 x1000 x3.0
143.0	3000 x1250 x4.5
180.0	3000 x1250 x6.0
210.0	3000 x1250 x8.0

SS UNS S31600 Plate Sizes

Size(mm)	Weight per sheet (kg)	Size (mm)	Weight per sheet (kg)
2500 x 1250 x 1.2	30.7	2500 x 1250 x 2.0	51.2
3000 x 1500 x 1.2	44.2	3000 x 1500 x 2.0	73.7
2500 x 1250 x 1.5	38.4	2500 x 1250 x 3.0	77.5
3000 x 1500 x 1.5	55.3	3000 x 1500 x 3.0	112.0

316 Stainless Steel Sheet 2B Finish

Size (mm)	Weight per sheet (kg)	Size (mm)	Weight per sheet (kg)
2000 x1000 x0.7	11.5	3000 x1500 x1.5	55.3
2500 x1250 x0.7	17.9	2000 x1000 x2.0	32.7
2000 x1000 x0.9	14.7	2500 x1250 x2.0	51.2
2500 x1250 x0.9	23.0	3000 x1500 x2.0	73.7
2500 x1250 x1.0	25.6	2000 x1000 x2.5	40.9
2000 x1000 x1.2	19.6	2500 x1250 x2.5	63.9
2500 x1250 x1.2	30.7	3000 x1500 x2.5	92.1
3000 x1500 x1.2	44.2	2000 x1000 x3.0	49.6
2000 x1000 x1.5	24.6	2500 x1250 x3.0	77.5
2500 x1250 x1.5	38.4	3000 x1500 x3.0	112.0

316 Stainless Steel Sheet Gauges

	NOMINAL DECIMAL	STANDARD VARIANCE FROM
SHEET METAL GAUGE	(APPROXIMATE INCHES)	NOMINAL DECIMAL  (+/- INCHES)
7	0.1793	0.0080
8	0.1644	0.0080
9	0.1495	0.0080
10	0.1345	0.0070
11	0.1196	0.0050
12	0.1046	0.0050
13	0.0897	0.0050
14	0.0747	0.0040
15	0.0673	0.0040
16	0.0598	0.0030
17	0.0538	0.0030
18	0.0478	0.0030
19	0.0418	0.0030
20	0.0359	0.0030
21	0.0329	0.0025
22	0.0299	0.0020
23	0.0269	0.0020
24	0.0239	0.0020
25	0.0209	0.0015
26	0.0179	0.0015
28	0.0149	0.0010

316 Sheet & Plate Finish Cross Reference Chart

Grit	RA	RMS	Trizact
30		250
40		200
60	145	150
80	71	125
100	61	69
120	52	58	A160
150	42	47	A130
180	30	34	A110
220	20	22	A90
240	15	17	A65
320	12	14	A45
500+	<3	<3	A35
1200			A20
1500			A10

Steel Sheet Type	Sheet Thickness	Sheet Length	Sheet Width	Sheet Specification
316 S/S HRAP REM .5000		RL	RW	ASTM A240 ASME SA240
316 S/S HRAP REM .2500		RL	RW	ASTM A240 ASME SA240
316 S/S PLATE HRAP REM .1875		RL	RW	ASTM A240 ASME SA240

Alloy Grade	Finish	Thickness	Width	Weight Each	Length
316	2B	11 ga	48"	201.6 #	120"
316	2B	14 ga	48"	126 #	120"
316	2B	16 ga	48"	100.8 #	120"
316	2B	18 GA	48"	80.6 #	120"
316	2B	20 GA	48"	60.48 #	120"

Stainless Steel 316 Plate Processing

SS 316 Plate Processing Options
2 Plasma Cutting Tables	from 3/16″ thick thru 6.25″ thick. SS 316 plate can be plasma cut
4 Dynamic Waterjet  Tables	from light gauge sheet metal thru 8″ thick SS 316 plate can be waterjet cut
4 Kasto Plate Saws	from 1/2″ thick thru 22″ thick SS 316 plate or bar can be Kasto saw cut.
1 plate laser	gauges thru 1-1/8″ thick SS 316 sheet plate can be laser cut.
3 Plate Shears	SS 316 plate thru 3/4″ thick can be shear cut to size.
Gauer Processing	SS 316 sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Machine Cutting	SS 316 rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter
Stainless 316 Plate Leveling	In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 316 Plate coil, thru 78.75″ wide (2 meter)