ISO Approved Stainless Steel 304L Plates, SS 1.4307 Sheet Manufacturer In India

Stainless Steel 304L Sheet is a low carbon variation of the 18/8 stainless steel sheets. It is an austenitic grade of stainless steel and is used mostly. The Stainless Steel 304L Plates are corrosion resistant to mild environmental conditions but are prone to pitting and crevice corrosion. Suryadeep Industry is a leading manufacturer and supplier of these plates in larger quantities. The plates range in dimensions. There are other forms such as the Stainless Steel 304L Slatting Coil, strip and foils in this material. It has high tensile strength and yield strength. The minimum yield strength is 205MPa and the minimum tensile strength is 515MPa. The SS 304L Coils are used in high temperature services. The material can operate up to 870 degrees Celsius for intermittent services and up to 925 degrees Celsius for continuous services. However, the use of AISI 304L Plate in high temperatures is limited by the aqueous nature of the ingredients.

The plate is poor in crevice and pitting resistance so it is not recommended for aqueous services. The SUS 304L Plate creates less intergranular corrosion during welding due to the less carbon and less carbide precipitation. The SS 304L Sheets are used in domestic, commercial and industrial applications where the strength and corrosion resistance are needed. The material is often used with polishing. The SS UNS S30403 Plates can come with different finishes such as electropolishing and others. The material is either hot rolled or cold rolled to produce the sheets. The 304L Stainless Steel Hot Rolled Plates are then further strengthened by solid solution annealing at elevated temperatures. Once annealed, the ASTM A240 Stainless Steel 304L Shim Sheets for pressure vessels and general corrosive applications cannot be further hardened by heat treatment. Please contact us for further information and pricing of various types of 304L plates such as the 304L SS Chequered Plate.

AISI 304L Plate Grades And Specifications

Specifications	ASTM A240 / ASME SA240
Length	2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness	4 milimeter - 100 milimeter
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width	1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

Supplier Of Stainless Steel 304L Slatting Coil In Bhopal, India, SS 304L Coils Specification, Buy 304L SS Chequered Plate At Factory Price.

SS TP304L Sheets Chemical Analysis

Grade	S	C	Cr	Mn	Ni	Si	Mo	P	N
SS 304L	0.030	0.035	18 – 20	2	8 – 13	1.0	–	0.045	–
SS 304H	0.030	0.10	18 – 20	2	8 – 10.5	0.75	–	0.045	–

SUS 304L Plate Mechanical Properties Chart

View Check Stainless Steel 304H Plates Chemical Composition, AISI 304L Plate Mechanical properties, SS UNS S30403 Sheets Manufacturer In India.

Grade	Density	Tensile Strength	Melting Point	Elongation	Yield Strength (0.2%Offset)
304L	8.0 g/cm3	Psi – 75000 , MPa – 515	1400 °C (2550 °F)	35 %	Psi – 30000 , MPa – 205
304H	8.0 g/cm3	Psi – 75000 , MPa – 515	1400 °C (2550 °F)	35 %	Psi – 30000 , MPa – 205

Various Types Of SS 304L Sheets

Manufacturer Of SUS 304L Plate In India, Visit our SS 304L Sheets in India, Call Now to Get SS TP304L Sheets Free sample, Stockist Of SS UNS S30409 Plates.

Stainless Steel 304H Plates Equivalent Grades

Grade Equivalent Of 304L Stainless Steel Hot Rolled Plates, Ratings Of ASTM A240 Stainless Steel 304L Shim Sheets, Lowest Price Of Bulk AISI 304H Plate, Stainless Steel 304L Sheet stock.

STANDARD	BS	WERKSTOFF NR.	GOST	UNS	JIS	AFNOR	EN
SS 304L	3304S11	1.4306 / 1.4307	03Х18Н11	S30403	SUS 304L	Z3CN18‐10	X2CrNi18-9 / X2CrNi19-11
SS 304H	-	1.4301	-	-	-	-	-

Stainless Steel 304L Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe

ASTM A240 Stainless Steel 304L Plate Melting Range

Plate Type	Melting Point
Stainless Steel 304L Plate	1400 °C (2550 °F)

ASME SA240 Stainless Steel 304L Plate Density

Plate Type	Density
Stainless Steel 304L Plate	8000 g/cm3

Plain & Polished 304L Stainless Steel Sheet

PRODUCT	FINISH	THICKNESS MM	MAX SHEET SIZE MM
Grade 304L	Plain 2B	0.9	2000 x 1000
	Bright	0.9	2000 x 1000
	Brushed Finish	0.9, 1.2	2000 x 1000, 2500 x 1250
	Rimex Super Mirror	0.8, 1.2	2400 x 1200, 2500 x 1250
	Embossed	0.8, 1.0	2500 x 1250

circle cutting in ss Grade 304L perforated sheets up to 1000mm diameter

Hole Dia mm	Hole Centres mm	O/A	Finish	Tck mm	Full Sheet Size mm
0.75	1.5	23%	2B	0.6	2000 x 1000
1	2	23%	2B	1.0	2000 x 1000
1.5	2.6	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
3	5	33%	2B	1.0	2000 x 1000
4	5.6	46%	2B	1.0	2000 x 1000
5	8	35%	2B	1.0	2000 x 1000
6	8	51%	2B	1.0	2000 x 1000
8	10	58%	2B	1,0	2000 x 1000

ASTM A240 Stainless Steel 304L Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

ASTM A240 Stainless Steel 304L Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

Stainless Steel Sheets -Type 304L | No. 2B Finish — Cold Rolled, Annealed

Stainless Steel Gauge, Width and Length	Weight Lbs. per Sq Ft.	Est. Wt. per Sheet
7GA (.1874")
48 x 96	7.871	251.9
48 x 120	7.871	314.8
48 x 144	7.871	377.8
10GA (.135”)
36 x 120	5.670	170.1
48 x 96	5.670	181.4
48 x 120	5.670	226.8
60 x 120*	5.670	283.5
60 x 144*	5.670	340.2
72 x 120*	5.670	340.2
11 GA (.120")
36 x 96	5.040	121.0
36 x 120	5.040	151.2
36 x 144	5.040	181.4
48 x 96	5.040	161.3
48 x 120	5.040	201.6
48 x 144	5.040	241.9
60 x 120	5.040	252.0
60 x 144	5.040	302.4
72 x 120*	5.040	302.4
72 x 144*	5.040	362.9
12 Ga. (.105")
36 x 96	4.410	105.8
36 x 120	4.410	132.3
36 x 144	4.410	158.8
42 x 120	4.410	154.4
48 x 96	4.410	141.1
48 x 120	4.410	176.4
48 x 144	4.410	211.7
60 x 96	4.410	176.4
60 x 120	4.410	220.5
60 x 144	4.410	264.6
72 x 120*	4.410	264.6
72 x 144	4.410	317.5
13 Ga (.090")
36 x 96	3.780	90.72
36 x 120	3.780	113.4
48 x 120	3.780	151.2
14 Ga. (.075")
30 x 120	3.150	78.75
36 x 96	3.150	75.60
36 x 120	3.150	94.50
36 x 144	3.150	113.4
42 x 120	3.150	110.3
42 x 144	3.150	132.3
48 x 96	3.150	100.8
48 x 120	3.150	126.0
48 x 144	3.150	151.2
60 x 120	3.150	157.5
60 x 144	3.150	189.0
72 x 120	3.150	189.0
72 x 144	3.150	226.8
16 Ga. (.060")
30 x 96	2.520	50.40
30 x 120	2.520	63.00
36 x 96	2.520	60.48
36 x 120	2.520	75.60
36 x 144	2.520	90.72
42 x 120	2.520	88.20
48 x 96	2.520	80.64
48 x 120	2.520	100.8
48 x 144	2.520	121.0
60 x 96	2.520	100.8
60 x 120	2.520	126.0
60 x 144	2.520	151.2
18 Ga. (.048")
30 x 96	2.016	40.32
30 x 120	2.016	50.40
36 x 96	2.016	48.38
36 x 120	2.016	60.48
36 x 144	2.016	72.58
42 x 120	2.016	70.56
48 x 96	2.016	64.51
48 x 120	2.016	80.64
48 x 144	2.016	96.77
60 x 120	2.016	100.8
60 x 144	2.016	121.0
19 Ga. (.042")
36 x 120	1.764	52.92
20 Ga. (.036")
30 x 96	1.512	30.24
30 x 120	1.512	37.80
36 x 96	1.512	36.29
36 x 120	1.512	45.36
36 x 144	1.512	54.43
42 x 120	1.512	52.92
48 x 96	1.512	48.38
48 x 120	1.512	60.48
48 x 144	1.512	72.58
22 Ga. (.030")
30 x 96	1.260	25.20
30 x 120	1.260	61.50
36 x 96	1.260	30.24
36 x 120	1.260	37.80
36 x 144	1.260	45.36
48 x 96	1.260	40.32
48 x 120	1.260	50.40
24 Ga. (.024")
30 x 96	1.008	20.16
30 x 120	1.008	25.20
36 x 96	1.008	24.19
36 x 120	1.008	30.24
48 x 96	1.008	32.26
48 x 120	1.008	40.32
26 Ga. (.018")
30 x 96	.7560	15.12
30 x 120	.7560	18.90
36 x 96	.7560	18.14
36 x 120	.7560	22.68
48 x 96	.7560	24.1
48 x 120	.7560	30.24
28 Ga. (.015")
36 x 96	.630	15.12
36 x 120	.630	18.90

Type 304L – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation	Size in Inches	Wt. per Sq. Ft. in Lbs.	Wt. Per Sheet
3/4__9	48 x 96	1.95	62.4
1/2__13	48 x 96	1.78	56.9
1/2__16	48 x 96	0.86	27.5
1/2__18	48 x 96	0.69	22.1
1-1/2__9	48 x 96	1.31	41.9
3/4__13	48 x 96	0.86	27.5
3/4__16	48 x 96	0.57	18.2
3/4__18	48 x 96	0.46	14.7
1-1/2__13	48 x 96	0.65	20.8

SS 304L Plate Weight Per Unit

Thickness	Plate Weight per Unit Area	Density
3/16 inches	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

SS UNS S30403 Plate Sizes

SS 304L Plate Thickness	SS 304L Plate Size	SS 304L Sheet Weight per Unit Area	Estimated Weight per Sheet
0.015 inches 0.381 mm	36 x 96	0.630 lbs/ft²3.07566 kg/m²	15.12 lbs6.84936 kg
0.015 inches 0.381 mm	36 x 120	0.630 lbs/ft²3.07566 kg/m²	18.90 lbs8.5617 kg
0.0178 inches 0.45212 mm	36 x 96	0.756 lbs/ft²3.690792 kg/m²	18.15 lbs8.22195 kg
0.0178 inches 0.45212 mm	36 x 120	0.756 lbs/ft²3.690792 kg/m²	22.68 lbs10.27404 kg
0.0178 inches 0.45212 mm	48 x 96	0.756 lbs/ft²3.690792 kg/m²	24.19 lbs10.95807 kg
0.0178 inches 0.45212 mm	48 x 120	0.756 lbs/ft²3.690792 kg/m²	30.24 lbs13.69872 kg
0.0235 inches 0.5969 mm	30 x 96	1.008 lbs/ft²4.921056 kg/m²	20.16 lbs9.13248 kg
0.0235 inches 0.5969 mm	30 x 120	1.008 lbs/ft²4.921056 kg/m²	25.20 lbs11.4156 kg
0.0235 inches 0.5969 mm	36 x 96	1.008 lbs/ft²4.921056 kg/m²	24.19 lbs10.95807 kg
0.0235 inches 0.5969 mm	36 x 120	1.008 lbs/ft²4.921056 kg/m²	30.24 lbs13.69872 kg
0.0235 inches 0.5969 mm	36 x 144	1.008 lbs/ft²4.921056 kg/m²	36.29 lbs16.43937 kg
0.0235 inches 0.5969 mm	48 x 96	1.008 lbs/ft²4.921056 kg/m²	32.26 lbs14.61378 kg
0.0235 inches 0.5969 mm	48 x 120	1.008 lbs/ft²4.921056 kg/m²	40.32 lbs18.26496 kg
0.0235 inches 0.5969 mm	48 x 144	1.008 lbs/ft²4.921056 kg/m²	48.39 lbs21.92067 kg
0.0291 inches 0.73914 mm	30 x 96	1.260 lbs/ft²6.15132 kg/m²	25.20 lbs11.4156 kg
0.0291 inches 0.73914 mm	30 x 120	1.260 lbs/ft²6.15132 kg/m²	31.50 lbs14.2695 kg
0.0291 inches 0.73914 mm	36 x 96	1.260 lbs/ft²6.15132 kg/m²	30.24 lbs13.69872 kg
0.0291 inches 0.73914 mm	36 x 120	1.260 lbs/ft²6.15132 kg/m²	37.80 lbs17.1234 kg
0.0291 inches 0.73914 mm	36 x 144	1.260 lbs/ft²6.15132 kg/m²	45.37 lbs20.55261 kg
0.0291 inches 0.73914 mm	48 x 96	1.260 lbs/ft²6.15132 kg/m²	40.32 lbs18.26496 kg
0.0291 inches 0.73914 mm	48 x 120	1.260 lbs/ft²6.15132 kg/m²	50.41 lbs22.83573 kg
0.0291 inches 0.73914 mm	48 x 144	1.260 lbs/ft²6.15132 kg/m²	60.49 lbs27.40197 kg
0.0355 inches 0.9017 mm	30 x 96	1.512 lbs/ft²7.381584 kg/m²	30.24 lbs13.69872 kg
0.0355 inches 0.9017 mm	30 x 120	1.512 lbs/ft²7.381584 kg/m²	37.80 lbs17.1234 kg
0.0355 inches 0.9017 mm	36 x 96	1.512 lbs/ft²7.381584 kg/m²	36.29 lbs16.43937 kg

304L Stainless Steel Sheet Stock

Steel Sheet Type	Sheet Thickness	Sheet Length	Sheet Width	Sheet Specification
304L-2B S/S SHEET .0595	0.0595	120 IN	60	AMS 5511 ASTM A240
304L-2B S/S SHEET .0595	0.0595	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .0351	0.0351	96 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .0351"	0.0351	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .090	0.0900	96 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .135	0.1350	120 IN	60	AMS 5511 ASTM A240
304L-2B S/S SHEET .135	0.1350	96 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .135	0.1350	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .018	0.0180	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .120	0.1200	120 IN	60	AMS 5511 ASTM A240
304L-2B S/S SHEET .120	0.1200	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .075	0.0750	96 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .075	0.0750	120 IN	60	AMS 5511 ASTM A240
304L-2B S/S SHEET .075	0.0750	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .1874	0.1874	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .1874	0.1874	120 IN	60	AMS 5511 ASTM A240
304L-2B S/S SHEET .0235	0.0235	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .048	0.0480	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .048	0.0480	96 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .105	0.1050	120 IN	48	AMS 5511 ASTM A240
304L-2B S/S SHEET .105	0.1050	96 IN	48	AMS 5511 ASTM A240

Stainless Steel 304L Plate Processing

SS 304L Plate Processing Options
2 Plasma Cutting Tables	SS 304L plate can be plasma cut from 3/16″ thick thru 6.25″ thick.
4 Dynamic Waterjet  Tables	SS 304L plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 304L Plate.
4 Kasto Plate Saws	SS 304L plate or bar from 1/2″ thick thru 22″ thick SS 304L can be Kasto saw cut.
1 plate laser	SS 304L sheet gauges thru 1-1/8″ thick SS 304L plate can be laser cut.
3 Plate Shears	SS 304L plate thru 3/4″ thick can be shear cut to size.
Gauer Processing	SS 304L sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Machine Cutting	SS 304L rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter
Stainless 304L Plate Leveling	In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 304L Plate coil, thru 78.75″ wide (2 meter)