10CRMO9-10 Steel Plates is under the specification EN10273 and is intended for use in high pressure services at elevated temperatures. It is a non – alloy steels but with chromium and nickel in the composition. Suryadeep Industry is a leading distributor of these plates in various types, sizes and scales. The 10CrMo9-10 Plates have 0.012% nickel and 2 02.5% chromium in the composition with carbon, silicon, manganese, phosphorus, sulfur, copper and molybdenum. The 0.9-1.1% molybdenum adds to the strength and corrosion resistance of the steel plates. These are used for mostly boilers and pressure vessels.
The dimensions of the 10CrMo9-10 grade plates can vary based on the needs of the application. The thickness ranges from 6mm to 300mm, the width ranges from 1500mm to 4050mm and the length ranges from 3000mm to 15000mm. The material is certified through mill tests as per EN10204 3.1. The strength varies for these 10CrMo9-10 Boiler and Pressure Vessel Steel Plate thicknesses. The thicker plates over 250mm in thickness have lower values with 250MPa minimum yield strength and up to 600MPa minimum yield strength where the plates with less than 16mm thickness have 310MPa yield strength and up to 630MPa minimum tensile strength. The 10crmo9-10 Material is used in storage tanks, low pressure vessels, other pressure vessels and boilers, heat exchangers and in temperature controlled vessels for hot oil and gas applications. Please contact us for more information on these products, pricing and orders.
Table of Content - 10CrMo9-10 Plates Material Standards And Grades - Chemical Analysis of 10crmo9-10 Material - 10CrMo9-10 Steel Sheet Mechanical Properties Database - What Are The Different Types Of 10CRMO9-10 Steel Plate? - 10CrMo9-10 Sheet Outside Diameter & Tolerance - EN10028 10CrMo9-10 Steel Plate Wall thickness & Tolerance - 10CrMo9-10 Steel Plates Application - Physical properties of Grade 10CrMo9-10 Sheet - 10CrMo9-10 Plate - Form of Supply
Standard | DIN 17175 |
Thickness | 1.8 milimeter ~ 22 milimeter |
Equivalent Standards | EN 10216-2, ASTM A213, ASME SA213, ASTM A335, ASTM A199, ASTM A200, BS 3059 Part II, NF A 49-213 |
Length | 5800 milimeter; 6000 milimeter; 10000 milimeter; 11500 milimeter; 11800 milimeter; and so on. |
Material | 10CrMo910, 1.7380 |
Out Diameter | 17.2 milimeter ~ 168 milimeter |
Equivalent Materials | 10CrMo9-10, T22, P22, 622-440, TU 10 CD 9-10 |
Max length | 18000 milimeter |
S, % | C, % | Si, % | Mn, % | Cr, % | P, % | Mo, % |
0.035 max | 0.08-0.15 | 0.50 max | 0.40-0.70 | 2.00-2.50 | 0.035 max | 0.90-1.20 |
Yield Strength, MPa | Tensile Strength , MPa | Elongation, % |
280 min | 450-600 | 20 min |
Outside Diameter, mm | Tolerance, % |
OD>120 | ±0.75 |
OD≤120 | ±0.6, 0.25mm min |
Outside Diameter , mm | Tolerance, % | Wall Thickness, mm |
OD≤130 | +15/-10 | WT≤2*S(DIN 2448) |
+12.5/-10 | 2*S(DIN 2448)<WT≤4*S(DIN 2448) | |
±9 | WT>4*S(DIN 2448) | |
130<OD≤320 | +17.5/-12.5 | WT≤0.05*OD |
±12.5 | 0.05*OD<WT≤0.11*OD | |
±10 | WT>0.11*OD | |
320<OD≤660 | +22.5/-12.5 | WT≤0.05*OD |
+15/-12.5 | 0.05*OD<WT≤0.09*OD | |
+12.5/-10 | WT>0.09*OD |
Grade | 10CrMo9-10 Mechanical Property | ||||||
Thickness | Yield | Tensilmie | Elongation | Impact Energy(KV J) min | |||
10CrMo9-10 | Mm | Min Mpa | Mpa | Min % | -20° | 0° | +20° |
≤ 16 | 310 | 480-630 | 18 | f | f | 31 | |
16<to ≤40 | 300 | 480-630 | 18 | f | f | 31 | |
40< to ≤60 | 290 | 480-630 | 17 | f | f | 27 | |
60< to ≤100 | 280 | 470-620 | 17 | f | f | 27 | |
100< to ≤150 | 260 | 460-610 | 17 | f | f | 27 | |
150<to ≤250 | 250 | 450-600 | 17 | f | f | 27 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
893 (≥) | 573 (≥) | 22 | 34 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
745 | 322 | 183 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |