Rockstar HITEMP Plates falls under a special category of plates. This particular material was developed in the 70’s and is very much wear resistant even under heavy mechanical loads. The plates are very highly cost effective against wear and tear. Suryadeep Industry is a leading supplier and Distributor of these plates in various shapes, sizes and standards. The Rockstar HiTemp Sheet is quenched and tempered to get the hardness. This is just the opposite of the traditional steel material. The traditional steel types lose hardness as they are tempered. The plates can range in thickness from 5mm to 51mm.
There are different specifications such as the EN10029 and the EN 10163-2 to manage the dimensions of the plates. The width of the Rockstar wear plates can range up to 3350mm and the length can range up to 14630mm. The hardness of the materials range from 375 -425 in the HBW hardness scale. The yield strengths go up to 1100MPa. The chemical composition of the material includes carbon, silicon, manganese, phosphorus, sulfur, chromium, nickel, molybdenum and boron. This composition also makes the Rockstar HiTemp high-temperature steel sheet applicable under elevated temperatures and high wear and tear conditions such as jet engine parts and turbines. Please feel free to contact us for any information on the Rockstar HiTemp Sheet or plate materials and their prices.
Table of Content - Rockstar HiTemp Wear Plates Mechanical Characteristics - Rockstar HiTemp Sheet Composition Standard - Rockstar HiTemp Plates Tolerances - List Of Rockstar HiTemp Plates Types - Rockstar High Temp Plates Impact Properties - Equivalent Grades Of Rockstar Wear Plates - High-Strength Wear Steel Plate Temperature Limit - Rockstar HiTemp Sheet Laser Cutting - HiTemp Plate Plasma Cutting - Rockstar High Temp Plates Thickness - HiTemp high-temperature Steel Sheet Welding Method - High-Temperature Steel Sheet Sizes - HiTemp Plates Widths and Lengths
Thickness | Typical yield strength | Hardness HBW |
5.0 - 51.0 | 1100 | 350 - 400 |
P | C | Cr | Si | Ni | Mn | Mo | S | B |
0.025 | 0.25 | 1.40 | 0.70 | 1.50 | 1.60 | 0.5 | 0.010 | 0.004 |
Grade | Longitudinal test, typical impact energy, Charpy V 10x10 mm test specimen. 1) |
---|---|
Rockstar HiTemp | 60 J/ -40 oC |
Thickness (milimeter) |
4.7 - 51.0 |
---|---|
Typ CET(CEV) | 0.40 (0.59) |
Max CET(CEV) | 0.47 (0.70) |
Product | Temperature Range |
HiTemp Wear Plate | 300-500°C |
Cutting method | Kerf width | HAZ | Dim. tolerances |
---|---|---|---|
Laser cutting | < 1 mm | 0.2-2 mm | ± 0.2 mm |
Cutting method | Kerf width | HAZ | Dim. tolerances |
---|---|---|---|
Plasma cutting | 2-6.5 mm | 2-5 mm | ± 1.0 mm |
Grade | Plate thickness | Minimum preheating temp. (°C) | Maximum preheating temp. (°C) |
---|---|---|---|
Rockstar HiTemp | 5 – 51 mm | No preheating | 500 |
Max plate thickness | Rockstar HiTemp |
---|---|
12 mm | no restriction |
15 mm | no restriction |
20 mm | no restriction |
25 mm | no restriction |
30 mm | no restriction |
35 mm | no restriction |
40 mm | no restriction |
45 mm | no restriction |
50 mm | no restriction |
60 mm | |
70 mm | |
80 mm | |
>80 mm |
Welding method | AWS classification | EN classification |
---|---|---|
MAG/ GMAW, solid wire | AWS A5.28 ER70X-X | EN ISO 14341-A- G 38x |
AWS A5.28 ER80X-X | EN ISO 14341-A- G 42x | |
MAG/ MCAW, metal cored wire | AWS A5.28 E7XC-X | EN ISO 17632-A- T 42xH5 |
AWS A5.28 E8XC-X | EN ISO 17632-A- T 46xH5 | |
MAG/ FCAW, flux cored wire | AWS A5.29 E7XT-X | EN ISO 17632 -A- T 42xH5 |
AWS A5.29 E8XT-X | EN ISO 17632 -A- T 46xH5 | |
MMA (SMAW, stick) | AWS A5.5 E70X | EN ISO 2560-A- E 42xH5 |
AWS A5.5 E80X | EN ISO 2560-A- E 46xH5 | |
SAW | AWS A5.23 F49X | EN ISO 14171-A- S 42x |
AWS A5.23 F55X | EN ISO 14171-A- S 46x | |
TIG/ GTAW | AWS A5.18 ER70X | EN ISO 636-A- W 42x |
AWS A5.28 ER80X | EN ISO 636-A- W 46x |
1/8" | 3/8" | 3/4" | 1-1/2" | 3" |
3/16" | 1/2" | 1" | 2" | 4" |
1/4" | 5/8" | 1-1/4" | 2-1/2" | |
*1/8" thick plate is available in one size only 60"x 120". The 3/6" thick plate is available only as 48" x 144" and 96 " x 144". |
Thickness |
Width |
Length |
4 milimeter |
2000 |
6000 |
5 milimeter |
2000 |
6000 |
6 milimeter |
2000 |
6000 |
6 milimeter |
2500 |
6000 |
8 milimeter |
2000 |
6000 |
8 milimeter |
2500 |
6000 |
10 milimeter |
2000 |
6000 |
12 milimeter |
2000 |
6000 |
15 milimeter |
2000 |
6000 |
16 milimeter |
2000 |
6000 |
20 milimeter |
2000 |
6000 |
25 milimeter |
2000 |
6000 |
32 milimeter |
2000 |
6000 |
40 milimeter |
2000 |
6000 |
50 milimeter |
2000 |
6000 |
60 milimeter |
1800 |
3400 |