Get Free Quote For Abrex 450 Boiler Steel Plates, Rockstar 450 Wear Sheet
Rockstar 450 Plates is one of the mostly used wear resistant and abrasion resistant steel plates in the world. The high strength, high hardness plates are used in structural as well as mechanical applications to withstand high mechanical loads over long periods of time. Suryadeep Industry is one of the leading Rockstar 450 Wear Plate Suppliers and we produce all different types of Rockstar 450 plates. The material is strong with the yield strength ranging up to 1300MPa, almost three times that of the ordinary steel plates. The Ar 450 steel plates comes in different thicknesses. The sheets are thinner, ranging from 3mm to 80mm and the hardness value of plates less than 80mm range from 425 to 475. The Grade 450 Steel Plates with the thickness range of 80mm to 100mm has 410 to 475 hardness and the plates above 100mm thickness can start from 390 to 475. The Rockstar 450 Wear Plates also comes in various widths rangin from 1500 to 4050mm but the most preferred width is in the range of 1500 to 1600mm. The length also ranges from 1460mm.
The Xar 450 Rockstar Wear Plates also have high impact strength. The impact strength and other higher mechanical properties of the material come from the composition. The Rockstar 450 Boiler Steel Plates are used in high temperature applications such as the boilers and heat exchangers. The composition includes carbon, silicon, manganese, phosphorus, sulfur, chromium, nickel, molybdenum and boron. The Bis 450 Wear Resistant Steel Plates are used in transportation systems, excavator buckets, trailers, rails, bulldozers and other heavy machinery. The 450 Bhn Abrasion Resistant Steel Plates are also used to make the frames of dump trucks and heavy metal earth moving machines. The High Tensile Raex 450 Steel Plates also have high hardness values. This combination makes them withstand high abrasion which is why they are used in wearing off applications. Please contact us for more information on the Abrex 450 Boiler Steel Plates and prices.
Ar 450 Steel Plate Standard Size And Specification
Thickness |
6mm to 100mm |
Production Technique |
Hot-Rolled (HR) / Cold-Rolled (CR) |
Width |
1,500mm to 2,500mm |
Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Length |
6,000mm to 12,000mm |
Form |
Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
Heat Treatment |
N, Q+T |
Surface Paint |
EP, PE, HDP, SMP, PVDF |
Finish |
Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated |
Chemical Composition Of Rockstar 450 Sheet, Ar 450 Steel Plates Mechanical Properties, Best offer on Grade 450 Steel Plates, Rockstar 450 Abrasion Resistant Steel Plates.
Grade 450 Steel Plate Composition Standard
P |
C |
S |
Si |
Ni |
Mn |
Mo |
Cr |
B |
0.025 |
0.26 |
0.01 |
0.7 |
1.50 |
1.6 |
0.6 |
1.40 |
0.005 |
Equivalent Grades Of Grade 450 Steel Plate
Rockstar 450 Wear Plates Equivalent, Rockstar 450 Liner Plates Supplier In India, HB 450 BHN Plates Stockist In India, Contact US For Xar 450 Rockstar Wear Plates Instant Delivery.
Thickness |
20 - (40) |
-5 |
40 - 80 |
5 - (10) |
(80) - 130 |
10 - (20) |
CET (CEV) Max |
0.41 (0.60) |
0.37 (0.48) |
0.43 (0.74) |
0.38 (0.49) |
0.41 (0.67) |
0.39 (0.52) |
CET (CEV) Typical |
0.38(0.56) |
0.29 (0.39) |
0.38 (0.61) |
0.33 (0.45) |
0.39 (0.64) |
0.36 (0.48) |
Rockstar 450 Boiler Steel Plates Mechanical Characteristics
Thickness |
Typical yield strength MPa |
Hardness HBW |
3 - 80 |
1100 - 1300 |
425 - 475 |
(80) - 100 |
1050 - 1300 |
410 - 475 |
(100) - 130 |
1000 - 1300 |
390 - 475 |
Various Types Of Rockstar 450 Plate
Get Rockstar 450 Boiler Steel Plates, Rockstar 450LT Plates At Best Price, Properties Of Bis 450 Wear Resistant Steel Plates, We provide Rockstar 450 Plates Expert Cutting Service In Bhopal, India.
Ar 450 Steel Plate
Grade 450 Steel Plate
Rockstar 450 Wear Plate
Rockstar 450 Liner Plates
HB 450 BHN Plate
Xar 450 Rockstar Wear Plates
Rockstar 450 Boiler Steel Plates
Bis 450 Wear Resistant Steel Plates
450 HBW Rockstar plates
450 Bhn Abrasion Resistant Steel Plates
High Tensile Raex 450 Steel Plates
HB 450 plate
Makes of HB 450 Plate Country Origin
Brand |
Country |
Manufacture/Co |
Hardness Range |
Value for Rockstar 450 BHN |
Rockstar 450 |
Sweden |
SSAB |
425-475 |
Rockstar 450 Abrasion Resistant Steel Plates Size Chart
We Maintain 450 HBW Rockstar plates Good Quality, 450 Bhn Abrasion Resistant Steel Plates Suppliers In Bhopal, India, Check Availability Of High Tensile Raex 450 Steel Plates, Get Free Quote Of HB 450 plates, NM450 Wear Resistant Steel Plates.
1/8" |
3/8" |
3/4" |
1-1/2" |
3" |
3/16" |
1/2" |
1" |
2" |
4" |
1/4" |
5/8" |
1-1/4" |
2-1/2" |
|
Rockstar 450LT Plates Thicknesses
Thickness |
Length |
Width |
4 |
6000 |
2000 |
5 |
6000 |
2000 |
6 |
6000 |
2000 |
6 |
6000 |
2500 |
8 |
6000 |
2000 |
8 |
6000 |
2500 |
10 |
6000 |
2000 |
12 |
6000 |
2000 |
15 |
6000 |
2000 |
16 |
6000 |
2000 |
20 |
6000 |
2000 |
25 |
6000 |
2000 |
32 |
6000 |
2000 |
40 |
6000 |
2000 |
50 |
6000 |
2000 |
60 |
3400 |
1800 |
Rockstar 450 Wear Resistance Steel Plates Welding Method
Welding method |
AWS classification |
EN classification |
MAG/ GMAW, solid wire |
AWS A5.28 ER70X-X |
EN ISO 14341-A- G 38x |
|
AWS A5.28 ER80X-X |
EN ISO 14341-A- G 42x |
MAG/ MCAW, metal cored wire |
AWS A5.28 E7XC-X |
EN ISO 17632-A- T 42xH5 |
|
AWS A5.28 E8XC-X |
EN ISO 17632-A- T 46xH5 |
MAG/ FCAW, flux cored wire |
AWS A5.29 E7XT-X |
EN ISO 17632 -A- T 42xH5 |
|
AWS A5.29 E8XT-X |
EN ISO 17632 -A- T 46xH5 |
MMA (SMAW, stick) |
AWS A5.5 E70X |
EN ISO 2560-A- E 42xH5 |
|
AWS A5.5 E80X |
EN ISO 2560-A- E 46xH5 |
SAW |
AWS A5.23 F49X |
EN ISO 14171-A- S 42x |
|
AWS A5.23 F55X |
EN ISO 14171-A- S 46x |
TIG/ GTAW |
AWS A5.18 ER70X |
EN ISO 636-A- W 42x |
|
AWS A5.28 ER80X |
EN ISO 636-A- W 46x |
Rockstar 450 Plates Material Application
- Conveyors
- Dump Truck Bodies
- Loading Buckets & Bulldozers
- Chutes
- Crushers
450 Rockstar Hot Rolled Plate Laser Cutting
Cutting method |
Kerf width |
HAZ |
Dim. tolerances |
Laser cutting |
< 1 mm |
0.2-2 mm |
± 0.2 mm |
Rockstar 450BHN Plate Plasma Cutting
Cutting method |
Kerf width |
HAZ |
Dim. tolerances |
Plasma cutting |
2-6.5 mm |
2-5 mm |
± 1.0 mm |
450HBW Rockstar Plates Dimensions
Thickness |
Width |
6 – 50 mm |
Up to 3500 milimeter |
Delivery Condition |
Quenched / Quenched and tempered. |
Rockstar 450 Abrasion Resistant Steel Plates Temperatures Range
Grade |
Plate thickness |
Minimum preheating temp. (°C) |
Maximum preheating temp. (°C) |
Rockstar 450 |
< 40 mm
40 – 49.9 mm
50 – 69.9 mm
≥ 70 mm |
No preheating
100
150
175 |
225 |
Wear Resistant Rockstar 450 Plates Maximal Cutting Speed For Oxy-fuel
Max plate thickness |
Rockstar 450 |
12 mm |
no restriction |
15 mm |
no restriction |
20 mm |
no restriction |
25 mm |
no restriction |
30 mm |
no restriction |
35 mm |
no restriction |
40 mm |
230 |
45 mm |
200 |
50 mm |
180 |
60 mm |
170 |
70 mm |
160 |
80 mm |
150 |
>80 mm |
* |
Raex 450 Plates Solid Cemented Carbide Drill
|
Rockstar 450 |
Vc (m/min) |
40-60 |
fn (mm/rev) |
min-max |
Diameter |
3.0-5.0 |
0.03-0.05 |
5.01-10.0 |
0.05-0.11 |
10.01-15.0 |
0.11-0.15 |
15.01-20.0 |
0.15-0.20 |
Abrasion Resistant 450 Steel Plates Indexable Insert Drill
|
Rockstar 450 |
Vc (m/min) |
50-90 |
fn (mm/rev) |
min-max |
Diameter |
12.0-20.0 |
0.04-0.10 |
20.01-30.0 |
0.06-0.12 |
30.01-44.0 |
0.06-0.14 |
44.01-63.5 |
0.08-0.16 |
Bhn 450 Plates Drills With Exchangeable Drill Heads
|
Rockstar 450 |
Vc (m/min) |
40-60 |
fn (mm/rev) |
min-max |
Diameter |
7.5-12.0 |
0.07-0.11 |
12.01-20.0 |
0.11-0.15 |
20.01-25.0 |
0.15-0.20 |
25.01-33.0 |
0.20-0.28 |
Cold Rolled Rockstar 450 Steel Plate Cutting Speed
|
Rockstar 450 |
Vc (m/min) |
10 - 18 |
fn (mm/rev) |
min-max |
Diameter |
7.5-11.5 |
0.08-0.12 |
12.0-17.5 |
0.12-0.18 |
18.0-25.9 |
0.11-0.20 |