Abrasion Resistant Plates BHN 600 is a steel that has an austenitic microstructure that can heal itself when the surface gets damaged. The oxide layer acts as a corrosion resistant coating. But the real specialty of the material is the extreme abrasion resistance. The Abrasion Resistant Abrasion Resistant Plates BHN 600 can operate under low temperatures including cryogenic temperatures. The material allows cold working, machining, forming and other processes. The NSSMC Abrasion Resistant Plates BHN 600 is used in varying applications such as construction, fertilizer industries, mining industries, cement industry, petrochemical industries and many others. Suryadeep Industry is a leading supplier of the NSSMC Abrasion Resistant Plates BHN 600 Plate, Abrasion Resistant Plates BHN 600 steel in different dimensions. The plates are the most commonly used form of this grade of steel. It ranges from 6mm to 100mm in thickness, 6000mm to 12000mm in length and 1500mm to 2500mm in width.
The Abrasion Resistant Plates BHN 600 WEAR RESISTANT material is produced by either hot rolling or cold rolling methods. And it can be heat treated for further strength. The heat treatment can be normalization or quenched and tempered. The RAEX 600 Wear Resistant Steel has carbon, silicon, manganese, phosphorus, sulfur, nickel, chromium, molybdenum and boron in the chemical composition. This composition along with the heat treatment allows for some high mechanical properties of the NSSMC 600 Abrasion Resistant Plates BHN. The minimum yield strength of the material is 1568MPa and the minimum tensile strength is 2058MPa. These values are more than five times that of ordinary steel types. The Abrasion Resistant Plates BHN-600 also has hardness up to 611 HBW. These qualities make the material be applicable in oil and gas industries, nuclear power plants, refineries, paper industry and in chemical industries. The other applications of the 600 Wear Abrasion Resistant steel include aerospace industry and earth moving machineries and crushers. Please contact us for further information on the Abrasion Resistant Plates BHN-600 Wear Abrasion Resistant material and its pricing.
Table of Content - Abrasion Resistant Abrasion Resistant Plates BHN 600 Plate Most Common Specification - Abrasion Resistant Plates BHN 600 Sheet Chemical Element - AR 600 Hot Rolled Plates Equivalent Grades - NSSMC Abrasion Resistant Plates BHN 600 Plates Mechanical Characteristics - Makes of Abrasion Resistant Plates BHN 600BHN Steel Plates Country Origin - List Of Abrasion Resistant Plates BHN 600 Plates Types - Abrasion Resistant Plates BHN 600 Wear Resistant Sheet Sizes - Abrasion Resistant Abrasion Resistant Plates BHN 600 Steel Plate Widths and Lengths - AR600 Plate Hardness - Low-Temperature 600 Abrasion Resistant Plates BHN Wear Resistant Steel Plates Application - Brand Of Abrasion Resistant Plates BHN 600 Plates - NSSMC AR 600 BHN Plates Flame Cutting - AR600 Plates Temperature - RAEX 600 Sheet Tests
Item | Abrasion Resistant Plate |
Width | 1,500 milimeter to 2500 milimeter |
Material | Abrasion Resistant Plates BHN 600 |
Surface Paint | EP, PE, HDP, SMP, PVDF |
Thickness | 6 milimeter to 100 milimeter |
Heat Treatment | N, Q+T |
Length | 6000 milimeter to 12,000 milimeter |
Plate | S | C | Cr | Si | Mo | Mn | CEV | P | Ni | B | CET |
8-30 | 0.01 | 045 | 1.2 | 0.7 | 0.8 | 1.00 | 0.73 | 0.015 | 2.5 | 0.004 | 0.55 |
(30)-50 | 0.01 | 0.47 | 1.2 | 0.7 | 0.8 | 1.00 | 0.84 | 0.015 | 2.5 | 0.004 | 0.59 |
Thickness (mm) | 25.00 - 65.00 | 8.00 - 24.99 |
Max CET(CEV) | 0.61 (0.87) | 0.58 (0.76) |
Grade | Mechanical Property | Charpy V Impact Test | ||
Abrasion Resistant Plates BHN 600 | Elongation | HBW | Degree | longitudinal |
Min % | Min Mpa | -40 | J | |
10 | 570-640 | 20 |
Brand | Country | Manufacture/Co | Hardness Range |
---|---|---|---|
Value for Abrasion Resistant Plates BHN 600 BHN | |||
Abrasion Resistant Plates BHN 600 | Sweden | SSAB | 570-640 |
1/8" | 3/8" | 3/4" | 1-1/2" | 3" |
3/16" | 1/2" | 1" | 2" | 4" |
1/4" | 5/8" | 1-1/4" | 2-1/2" |
Thickness | Length | Width |
---|---|---|
4 | 6000 | 2000 |
5 | 6000 | 2000 |
6 | 6000 | 2000 |
6 | 6000 | 2500 |
8 | 6000 | 2000 |
8 | 6000 | 2500 |
10 | 6000 | 2000 |
12 | 6000 | 2000 |
15 | 6000 | 2000 |
16 | 6000 | 2000 |
20 | 6000 | 2000 |
25 | 6000 | 2000 |
32 | 6000 | 2000 |
40 | 6000 | 2000 |
50 | 6000 | 2000 |
60 | 3400 | 1800 |
Brand | Hardness Range |
Value for AR 600 | |
Abrasion Resistant Plates BHN 600 | 550-650 |
Brand | RANGE | Values |
Values for AR 400 | Thk: 10 – 20 | |
Hardox 400 | 370-430 | 0.37 |
QUARD 400 | 370-430 | 0.42 |
JFE EVERHARD 360LE | 360-430 | 0.38 |
SUMIHARD K400 | 400-440 | 0.46 |
ABRAZO 400 | 360-430 | 0.43 |
RAEX 400 | 360-430 | 0.43 |
DILLIDUR 400V | 370-430 | 0.43 |
XAR 400 | 370-430 | 0.43 |
BRINAR 400 | 360-430 | 0.48 |
FORA 400 | 360-430 | 0.48 |
HARDPLAST 380 | 360-430 | 0.56 |
NICRODUR 400 | 360-430 | 0.56 |
CREUSABRO 4800 | 360-430 | 0.48 |
WELHARD 400 | 400-440 | 0.46 |
BIS Plates 320 | 320-360 | 0.4 |
BIS Plates 400 | 370-430 | 0.4 |
BIS Plates 450 | 425-475 | 0.48 |
Rockstar 400 | 370-430 | 0.45 |
Rockstar 450 | 425-475 | 0.52 |
Rockstar 500 | 450-540 | 0.6 |
Abrasion Resistant Plates BHN 400 | 360-440 | 0.4 |
Abrasion Resistant Plates BHN 450 | 410-490 | 0.5 |
Abrasion Resistant Plates BHN 500 | 450-550 | 0.55 |
Abrasion Resistant Plates BHN 600 | 550-650 | 0.73 |
Plate Thickness (mm) |
Nozzle Size (LPN mm) |
Cutting O2 (Lb.in2) |
Heating O2 (Lb.in2) |
Heating propane (Lb.in2) |
Cutting speed (mm/min) |
CEV max % |
12.5 | 10-25 | 45 | 40 | 18 | 450 | 0.40 |
15.0 | 10-25 | 50 | 40 | 10 | 490 | 0.40 |
25.0 | 25-40 | 60 | 40 | 20 | 400 | 0.52 |
40.0 | 40-60 | 70 | 40 | 10 | 310 | 0.52 |
50.0 | 40-60 | 75 | 40 | 10 | 300 | 0.57 |
65-80 | 60-100 | 71 | 31 | 13 | 239 | 0.57 |
Temperature (°C) | 20 | 100 | 200 | 300 | 400 | 450 | 500 |
---|---|---|---|---|---|---|---|
YS (MPa) | 775 | 825 | 875 | 805 | 775 | 745 | 700 |
UTS (MPa) | 1160 | 1055 | 1095 | 1155 | 1070 | 985 | 880 |