S1100QL High Strength Structural Steel Plates is made up of a composition that provides great strength, abrasion resistance and some extent of corrosion resistance. The hot rolling process provides the 1100 Plates with excellent strength as well. Suryadeep Industry is a leading Distributor and supplier of these high abrasion resistant 1100 Structural Plate products in various sizes and scales. There are standards such as the EN 10051 to manage the properties of the plates. These plates were originally known as the domex plates and the brand name was changed. The S1100MC Steel Plates is named so that it has 1100MPa of minimum yield strength. This is one of the strongest plates in the market. The 1100 CR Sheets with their high mechanical properties are used in some of the high demanding mechanical and structural applications.
The 1100 CR High Strength Steel Plates also have very high tensile strength ranging from 1250MPa to 1450MPa. These are almost four times higher values than of ordinary steels. The 1100 EN 10025-6 Hot-Rolled Structural Steel Plate therefore can be used in heavy load bearing applications such as crane arms, booms in boom trucks, heavy loading truck frames and in excavator buckets. The 1100 Structural Plate is also used in constructing, panels, platforms, buildings and bridges. Due to the abrasion resistance capacity, the material is used in chemical, petrochemical, oil and gas and in aerospace industries as well. The 1100 Steel Sheet is made up of carbon, manganese, silicon, sulfur, aluminum, niobium, vanadium and titanium in the composition. The Dillimax S1100ql High Strength Steel Plate can be produced in cut to length sizes as well. We are ready to serve any amount of orders in these plates. Please contact us for your needs of EN 10163-2 1100 MC Hot-Rolled Heavy Plates and the pricing.
Table of Content - Dillimax 1100 Plates Grades And Specifications - 1100 Structural Steel Plate Mechanical Properties Database - 1100 Steel Plate Chemical Compatibility - List Of S1100QL High Strength Structural Steel Plate Types - Weldox S1100e Plates Equivalent Grades - S1100MC Steel Plate Tolerances - 1100 CR High Yield Steel Sheets - S1100QL Structural Steel Plates Impact Properties - S1100MC Plate Plasma Cutting - 1100 Structural Steel Sheet Laser Cutting - S1100MC Steel Plate Cutting Mathod - S1100QL High Strength Structural Steel Plate Maximum Preheat Levels - Typical Tensile Strength of S1100QL Structural Steel Plates - 1100 Plus Strip Typical Properties - Solid Cemented Carbide Drill of Superelso S1100 Ql Plates - S1100QL High Strength Plate Indexable Insert Drill - 1100 Steel Sheet Drills With Exchangeable Drill Heads - Thickness of 1100 Structural Plate - S1100QL Plates Preheat And Interpass Temperatures - Dillimax S1100ql High Strength Sheets Material Tests - S1100QL Test items for plates - 1100 CR Sheets Application - EN 10163-2 1100 MC Plates Cold forming
Item | 1100 / 1100MC / 1100 CR Plate |
Thickness | 4 - 100 milimeter |
Standards | EN 10025-6, EN 10029, EN 10163-2 |
Length | Up to 14630 milimeter |
Material | 1100 |
Used | Structural Low temperatures (down to -60°) |
Width | Up to 3350 milimeter |
Thickness | Elongation A v | Yield strength | Min. inner bending radius for a 90° bend | Tensile strength |
3.00- 8.00 | 7 | 1100 | 4.0 x t | 1250- 1450 |
P | C | S | Si | Al | Mn |
0.020 | 0.15 | 0.005 | 0.5 | 0.015 | 1.8 |
Thickness | Typical CET(CEV) |
---|---|
3.0 - 8.0 | 0.33 (0.56) |
USED | DIMENSIONS | STANDARDS |
---|---|---|
Structural | T: 3 - 8 mm W: Up to 1700 mm L: Up to 16000 mm |
EN 10051 EN 10163-2 |
Test direction | Min impact energy for Charpy V 10x10 mm tests specimens |
---|---|
Longitudinal | 27 J/ - 40 0C |
Cutting method | Kerf width | HAZ | Dim. tolerances |
---|---|---|---|
Plasma cutting | 2-6.5 mm | 2-5 mm | ± 1.0 mm |
Cutting method | Kerf width | HAZ | Dim. tolerances |
---|---|---|---|
Laser cutting | < 1 mm | 0.2-2 mm | ± 0.2 mm |
Cutting method | Kerf width | HAZ | Dim. tolerances |
---|---|---|---|
Oxy-fuel cutting | 2-5 mm | 4-10 mm | ± 2.0 mm |
Material | Max preheating temp. (°C) |
---|---|
1100 | 150 |
TYPE OF STEEL | TYPICAL TENSILE STRENGTH (MPa) |
---|---|
1100, 1100 MC | 1440, 1320 |
Hardness in Brinell (HBW) |
Hardness in Rockwell (HRC) |
Tensile strength, / Rm (N/mm2) |
|
---|---|---|---|
1100 | ~430 | ~43 | ~1340 |
1100 | ||
---|---|---|
Vc (m/min) | 40-60 | |
fn (mm/rev) | min-max | |
Diameter | 3.0-5.0 | 0.03-0.05 |
5.01-10.0 | 0.05-0.11 | |
10.01-15.0 | 0.11-0.16 | |
15.01-20.0 | 0.16-0.22 |
1100 | ||
---|---|---|
Vc (m/min) | 50-90 | |
fn (mm/rev) | min-max | |
Diameter | 12.0-20.0 | 0.04-0.10 |
20.01-30.0 | 0.05-0.12 | |
30.01-44.0 | 0.06-0.14 | |
44.01-63.5 | 0.08-0.16 |
1100 | ||
---|---|---|
Vc (m/min) | 40-60 | |
fn (mm/rev) | min-max | |
Diameter | 7.5-12.0 | 0.07-0.11 |
12.01-20.0 | 0.11-0.15 | |
20.01-25.0 | 0.15-0.20 | |
25.01-33.0 | 0.20-0.28 |
THICKNESS (t) (mm) | ALONG ROLLING DIRECTION MINIMUM Ri/t | DIE OPENING WIDTH (W) MINIMUM W/t | ||
---|---|---|---|---|
HOT ROLLED STRIP | 1100 MC | 3 ≤ t ≤ 8 | 4.0 | 14 |
Steel grade | Thickness(mm) | CEV1) % Typical | CET1) % Typical |
Strenx 1100 MC | 4–4.9 | 0.54 | 0.32 |
5 - 7 | 0.55 | 0.33 |
Steel grade | Sheet thickness | Max interpass |
(mm) | temperature, °C | |
Strenx 1100 MC | 4 - 7 | 150 |
No. |
Test item |
Quantity, Piece |
Sampling method |
Test method |
1 |
Chemical composition (Ladle analysis) |
1 (per batch furnace number) |
EN10025-6 |
EN10025-6 |
2 |
Tensile test |
1 (Rolled pc) |
EN10025-1 |
EN10025-1 |
3 |
Impact test at -40C |
3 (Rolled pc) |
EN10025-1 |
EN10025-1 |
4 |
Cold bend test |
1 (Product pc) |
EN10025-1 |
EN10025-1 |
5 |
Ultrasonic test |
Each product pc |
EN10160 |
EN10160 |
Position of bending lineto rolling direction | Minimum bending radius | Minimum bending radius | ||
t < 20 mm | t ≥ 20 mm | t < 20 mm | t ≥ 20 mm | |
Transverse direction | 4 t | 5 t | 12 t | 14 t |
Longitudinal direction | 5 t | 6 t | 14 t | 16 t |