Alloy 600 Sheet, UNS N06600 Plate Stockist & Supplier in India.

Inconel Alloy 600 Plates is made up of a nickel chromium alloy that is developed for high temperature services and for cryogenic temperature applications. Suryadeep Industry is a leading manufacturer and supplier of the Inconel 600 Plates materials in different specifications, standards and scales. The plates can perform up to 1093 degrees Celsius temperatures. The material contains 72% nickel, 14% chromium, iron, carbon, manganese, silicon, copper, aluminum, titanium, boron, phosphorus and sulfur in the composition. The UNS N06600 Plates have a high melting range of 2470 -2575 F. This high melting range allows them to be used in high temperature services. The stabilization with titanium and boron also allows the material to be stronger. The Inconel Alloy 600 Coils are another form of plates that can withstand high temperatures and cryogenic temperatures as well. In addition to the temperature tolerance, the Inconel 600 Slatting Coil also has high yield and tensile strengths. The minimum yield strength of ASTM B168 Sheet is 37ksi and the minimum tensile strength is 93ksi.

The Inconel 600 Sheet is resistant to weaker oxidizing agents due to the addition of chromium in the composition. An exceptional chloride stress corrosion cracking makes the ASME SB 168 UNS N06600 Plates applicable in harsh marine and sea water conditions. It could also be used in chemical processing where high chloride concentration is imminent. The JIS NCF 600 Plates, UNS N06600 Sheet is used in catalyst regeneration systems in petrochemical production plants. The plates could be either hot rolled or cold rolled as well. The 600 Inconel Hot Rolled Plates are used in heat treatment furnaces, vacuum furnace fixtures, afterburner parts and other high heat applications and components. The high temperature resistance, oxidation resistance and the strength make the ASTM B168 UNS N06600 Inconel 600 Shim Sheets appropriate for shim applications. The Cold Rolled Alloy 600 Plates are used in nuclear power plants, heat exchangers, acid and alkali equipment manufacturing and other precise applications. Please contact us for more information on the product and the pricing.

Inconel 600 Plate Standards And Specifications

Type Foils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Length 0-12mm or as required
Surface BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B168 Alloy 600 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
Width 0-2500mm or as required
Thickness 0.3 to 1200 mm or as required
Process Hot/ Cold Rolled

JIS NCF 600 Plate Density

Density
304 lb/in3

Physical Properties Of Inconel Alloy 600 Coils, Inconel 600 Slatting Coil Grades Equivalent, Get instant delivery of Inconel 600 Sheet In India.

Specific Heat Btu/lb °F
0.11

Inconel Alloy 600 Coils Melting Range

Melting range
2470-2575°F

Alloy 600 Sheets Size chart

Sizes
Size (in inches) Size (in mm)
.125" 3.18milimeter
.134" 3.40milimeter
.156" 3.96milimeter
.187" 4.75milimeter
.250" 6.35milimeter
.312" 7.92milimeter
.375" 9.53milimeter
.500" 12.7milimeter
.600" 15.9milimeter
.750" 19.1milimeter
.875" 22.2milimeter
1" 25.4milimeter
1.125" 28.6milimeter
1.250" 31.8milimeter
1.500" 38.1milimeter
1.750" 44.5milimeter
2" 50.8milimeter
2.500" 63.5milimeter
3" 76.2milimeter

Buy ASME SB 168 UNS N06600 Plate Fast Delivery, We provide JIS NCF 600 Plate In-House Cutting, Check the Market price before you buy 600 Inconel Hot Rolled Plates, Inconel 600 Cold Rolled Plates Manufacturer In India.

Inconel UNS N06600 Plates Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Inconel 600 Slatting Coil Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

List Of Inconel Alloy 600 Plate Types

Inconel 600 Plate Inconel 600 Plate
Inconel UNS N06600 Plates Inconel UNS N06600 Plates
Inconel Alloy 600 Coils Inconel Alloy 600 Coils
Inconel 600 Slatting Coil Inconel 600 Slatting Coil
Inconel 600 Sheet Inconel 600 Sheet
JIS NCF 600 Plate JIS NCF 600 Plate
600 Inconel Hot Rolled Plates 600 Inconel Hot Rolled Plates
Inconel 600 Cold Rolled Plates Inconel 600 Cold Rolled Plates
Inconel Alloy 600 Sheets Inconel Alloy 600 Sheets
Alloy 600 Plate Alloy 600 Plate
JIS NCF 600 Plate JIS NCF 600 Plate
600 Inconel Hot Rolled Plates 600 Inconel Hot Rolled Plates

Inconel 600 Sheet Thickness

0.5
0.6
0.8
1.0
1.2
1.5
1.6
1.8
2.0
3.0

4.0
5.0
6.0
8.0
10.0
12.0
15.0
20.0
25.4

Inconel Alloy 600 Sheets Suppliers In India, We provide Alloy 600 Plate with instant delivery, Stockist Of JIS NCF 600 Plate.

600 Inconel Hot Rolled Plates Weight Chart

Thickness(inches) Plate Weight per Unit Area Density
3/16 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

ASTM B 168 Inconel 600 Shim Sheets Chemical Structure

Grade Cu C Fe Mn Ni Si S Cr
Inconel 600 0.50 0.15 6.00 – 10.00 1.00 72.00 0.50 0.015 14.00 – 17.00

Alloy 600 Plate Mechanical Analysis

Element Tensile Strength Density Yield Strength Melting Point Elongation
Inconel 600 Psi – 95,000 , MPa – 655 8.47 g/cm3 Psi – 45,000 , MPa – 310 1413 °C (2580 °F) 40 %
Accept all small/ Large Orders 600 Inconel Hot Rolled Plates, Weight Chart Of ASTM B 168 Inconel 600 Shim Sheets, View UNS N06600 Sheet, Inconel 600 Cold Rolled Plates Grades Equivalent.

Equivalent Grades Of UNS N06600 Plates

STANDARD BS WERKSTOFF NR. GOST UNS AFNOR JIS EN
Inconel 600 NA 13 2.4816 МНЖМц 28-2,5-1,5 N06600 NC15FE11M NCF 600 NiCr15Fe

Difference Between Inconel and Incoloy

Inconel Compositions
Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01
Incoloy Compositions
Alloy name Yttrium oxide Balance
metal
Man
ganese
Chro
mium
Phos
phorus
Alu
minum
Silicon Tita
nium
Copper Carbon Cobalt Nickel Sulphur Moly
bdenum
Nb
+Ti
020 n/p Fe (~40%) <2.0 20 <0.045 n/p <1.0 n/p 3.5 <0.07 n/p 35 <0.035 2.5 about 1
DS nil Fe (~40%) 0.8-1.5 18 n/p n/p 2.3 0.2 0.5 0.1 18 (Co+
Ni
38)
18 (Co+
Ni
38)
0.03
MA956 0.5 Fe (~75%) <0.3 20 <0.02 4.75 n/p 0.4 <0.15 <0.1 <0.3 <0.5 n/p

Price of Inconel Alloy 600 Plate in India

Materials Price List
N06600 Nickel Alloy Inconel 600 Sheet Price with Good Quality US $22.00-$26.00 / Kilogram
Inconel Alloy 600 Plates Sheets US $15.00-$50.00 / Kilogram
Pure Nickel 600 Sheet US $16000-$16500 / Ton
Cold Hot Rolled Inconel Alloy 600 Plate/ Sheet US $35.00-$45.00 / Kilogram
Inconel 601 Alloy Nickel Sheet US $24.00-$26.00 / Kilogram
1mm Thickness Cold Rolled Inconel 600 Aluminum Alloy Plate Sheet Stock US $21.00-$21.00 / Kilogram
Nickel Chromium Alloy Inconel 600 Sheet US $11.00-$50.00 / Kilogram
Hot Rolled Inconel 600/Uns N06600 Nickel Plate Sheet Price US $36.00-$39.00 / Kilogram
Good Quality Nickel for Inconel 600 sheet US $12.00-$45.00 / Kilogram

Temperature Limit of Alloy Inconel 600 Sheet

Inconel 600 Plate is a nickel-chromium alloy designed for use at cryogenic temperatures range up to 2000˚F (1093˚C).

Nickel Alloy 600 Strip Tensile and Yield Strength

Temperature Tensile Strength 0.2%
Yield Strength
% Elongation
in 2"
°F °C ksi MPa ksi MPa
600
800
1000
1200
1400
1600
1800
316
427
538
649
760
871
982
90.5
88.5
84.0
65.0
27.5
15.0
7.5
624
610
579
448
190
103
52
31.0
29.5
28.5
26.5
17.0
9.0
4.0
214
203
196
183
117
62
28
46
49
47
39
46
80
118

Alloy 600 Inconel Clad Plate HS Code

HS Code Material
7506 Inconel Alloy 600 Plate

Difference between Inconel 600 Plate, Sheet & Foil

Inconel 600 Plate Inconel 600 Sheet Inconel 600 Foil
Thickness greater than 6.35 mm Thickness greater than 0.15 mm and less than 6.35mm Thickness less than 0.15mm

Alloy Inconel 600 Plate Stock List

Alloy Product form Dimension
INCONEL 600 (75 Ni/16 Cr) Strip; cold rolled, annealed 0.10x150 mm x coil, 0.12 kg/m
ALLOY 600 (75 Ni/16 Cr) Strip; cold rolled, annealed 0.40x200 mm x coil, 0.7 kg/m
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 0.4x914.4 mm x coil, 3.03 kg/m
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 0.5x1000 mm x coil, 4.14 kg/m
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 0.7x1000x2000 mm, 13.25 kg/pc
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 0.8x1219 mm x coil, 8.1 kg/m
ALLOY 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 1.0x1220 mm x coil, 10.10 kg/m
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 1.2x1200x3000 mm, 37.8 kg/pc
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, pickled, annealed 1.6x1220x3600 mm, 59 kg/pc
ALLOY 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed 2.0x1200x3000 mm, 62 kg/pc
INCONEL 600 (75 Ni/16 Cr) Sheet; cold rolled, annealed, pickled 2.5x1200x3000 mm, 76 kg/pc
ALLOY 600 (75 Ni/16 Cr) Sheet; cold rolled, soft annealed, descaled, sheared, tread plate, Checker Plate 3.0x1220x3000 mm, 92 kg/pc
ALLOY 600 (75 Ni/16 Cr) Plate; hot rolled, annealed 4.0x1200x3000 mm, 122 kg/pc
ALLOY 600 (75 Ni/16 Cr) Plate; hot rolled, annealed 5.0x2400x6000 mm, 606 kg/pc
ALLOY 600 (75 Ni/16 Cr) Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate 6.0x2440x6000 mm, 746 kg/pc
INCONEL 600 (75 Ni/16 Cr) Plate; hot rolled, descaled, annealed 8.0x2000x4000 mm, 564 kg/pce
ALLOY 600 (75 Ni/16 Cr) Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate 10.0x2000x4000 mm, 726 kg/pc
ALLOY 600 (75 Ni/16 Cr) Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate 12.0x2000x3000 mm, 616 kg/pc
INCONEL 600 (75 Ni/16 Cr) Plate; hot rolled, annealed 20.0x915x1235 mm, 193 kg/pc

UNS N06600 Inconel 600 Plate Features

  • High strength and good weldability under a wide range of temperatures
  • Excellent mechanical properties
  • Virtually immune to chlorine ion stress corrosion cracking
  • Resistant to a wide range of corrosive media.
  • Non-magnetic

Inconel 600 Steel Plate Uses and Applications

  • Aerospace equipment
  • Nuclear waste reprocessing equipment
  • Sour gas production tubes
  • Jet Engine exhaust systems
  • Chimney Linings
  • Chemical Processing
  • Motor racing exhaust systems

JIS NCF 600 Structural Plate Welding Material

Welding Method Welding Rate
mm/min
Welding Current
A
Inter-Pass
Temp. °C
Welding Voltage
V
Polarity Argon Rate
L/min
SMAW 180~200 120~140 15~100 22~24 DCEP -
TIG 100~110 110~130 15~100 15~17 DCEN 8~10