Ring Type Joint Flange Manufacturers in India
ASME B16.5 RTJ Flange Dimensions, Flat Face Ring Joint Flange
Raised Face RTJ, ASME Ring Type Joint Flange, Ring Type joint Flange Class 900, Weld Neck Ring Type joint Flange
Slip On Ring Type joint Flange, Ring Type joint Flange Weight Chart, Ring Type joint Blind Flange, Orifice Ring Type joint Flange, Ring Type Joint Flange Price in India
ASME B16.5 Ring Type Joint Flange
RTJ Ring Type Joint Flange Manufacturer
Table Of Content
- ASME B16.5 Ring Type Joint Definition
- Ring Type Joint Flange Specification
- Ring Type Joint Flange Material & Grades
- ASME B16.5 Ring Type Joint Flange Dimensions
- Ring Type Joint Flange Weight Chart
- Ring Type Joint Flange Pressure Rating
- RTJ Ring Type Joint Flange Applications
- ANSI B16.5 Ring Type Joint Flange Export to
Ally International Co is renowed Ring Type Joint Flange Manufacturers in India, A ASME B16.5 Ring Type Joint Flange is a plate for covering or closing the end of a pipe. A RTJ Flange Joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together, usually has a raised face with the groove machined into the face of the flange.ASME B16.5 RTJ flanges dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings size NPS ½” to 24” for above NPS 26” to 60 , it should be as per ASME B16.47.This type RTJ Flanges are mostly used for high pressure applications up to pressures as high as 15,000 psi (103 MPa). Ring Type joint flanges usually come in blind, slip-on, threaded and weld neck. But there is one disadvantages of using Ring Type Joint Flanges is that ring type joint grooves can accumulate moisture or dirt when the flange is open. Since the seal is a metal on metal connection, a small amount of damage on the narrow sealing surface may lead to a leak.
Our offered Class 900 Ring Type Joint Flange has excellent resistance to chloride-ion stress-corrosion cracking, and as well shows appropriate resistance to a number of oxidizing environments.ANSI B16.5 Ring Type Joint Flange is resistant to oxidation (corrosion resistant), chemical corrosion and has some high stress-rupture effectiveness and low creep rates under high stresses at temperatures after suitable heat treatment.
Supplier Of Class 300 Ring Type Joint Flange, Class 400 Ring Type joint Flange Facing Dimensions, ASME B16.47 RTJ Flange
Ring Type joint Flange Supplier, ANSI B16.5 RTJ Flange, MSS SP-44 Ring Type Joint Flanges, ASME B16.47 Series A and B RTJ Flange, DIN86029 PN10 Ring Type Joint Flange
ANSI/ASME B16.5 Ring Type joint Flange Specification
| Dimensions | ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings |
| Size | 1/2″ (15 NB) to 48″ (1200NB) |
| Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
| DIN | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673 |
| BS | BS4504 , BS4504, BS1560, BS10 |
| Coating/Surface Treatment | Antirust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Value Added Services | CNC Machining, Customised Flanges |
ASME B16.5 RTJ Ring Type Joint Flange Material Specification
Stainless Steel RTJ Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Ring Type joint Flanges :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Ring Type joint Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706
Low Temperature Carbon Steel Raised Face Ring Type joint Flanges : ASTM A350, LF2, LF3
Alloy Steel Ring Type joint Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Copper Alloy Steel Ring Type joint Flanges : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Nickel Alloy Ring Type joint Flanges :
ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
ANSI/ASME B16.5 RTJ FLANGE DIMENSIONS
Class 150 Ring Type Joint Flange Dimensions
Nominal Pipe Size |
Pitch Diam. of Ring and Groove |
Width of Ring |
HEIGHT OF RING |
Width of Flat on Octagonal Rings |
Width of Groove |
Depth of Groove |
Diameter of Raised Face for Ring Joint or Lapped |
Ring Number |
Approximate Distande Between Flange of Ring Joints When Ring is Compressed |
|
OVal |
Octagonal |
|||||||||
P |
A |
B |
H |
C |
F |
E(L*) |
K(Min) |
|||
1 |
47.6 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
63.5 |
R15 |
4.1 |
1 1/4 |
57.2 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
73.2 |
R17 |
4.1 |
1 1/2 |
65.1 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
82.6 |
R19 |
4.1 |
2 |
82.6 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
101.6 |
R22 |
4.1 |
2 1/2 |
101.6 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
120.7 |
R25 |
4.1 |
3 |
114.3 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
133.4 |
R29 |
4.1 |
3 1/2 |
131.8 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
153.9 |
R33 |
4.1 |
4 |
149.2 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
171.5 |
R36 |
4.1 |
5 |
171.5 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
193.5 |
R40 |
4.1 |
6 |
193.7 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
218.9 |
R43 |
4.1 |
8 |
247.7 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
273.1 |
R48 |
4.1 |
10 |
304.8 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
330.2 |
R52 |
4.1 |
12 |
381.0 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
406.4 |
R56 |
4.1 |
14 |
396.9 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
425.5 |
R59 |
3.0 |
16 |
454.0 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
482.6 |
R64 |
3.0 |
18 |
517.5 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
546.1 |
R68 |
3.0 |
20 |
558.8 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
596.9 |
R72 |
3.0 |
24 |
673.1 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
711.2 |
R76 |
3.0 |
Class 300 / 400 / 600 Ring Type Joint Flange Dimensions
Nominal Pipe Size |
Pitch Diam. of Ring and Groove |
Width of Ring |
HEIGHT OF RING |
Width of Flat on Octagonal Rings |
Width of Groove |
Depth of Groove |
Diameter of Raised Face for Ring Joint or Lapped |
Ring Number |
Approximate Distande Between Flange of Ring Joints When Ring is Compressed |
|||
OVal |
Octagonal |
|||||||||||
P |
A |
B |
H |
C |
F |
E(L*) |
K(Min) |
Class 300 |
Class 400 |
Class 600 |
||
1/2 |
34.1 |
6.4 |
11.1 |
9.5 |
4.3 |
7.1 |
5.6 |
50.8 |
R11 |
3.0 |
– |
3.0 |
3/4 |
42.9 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
63.5 |
R13 |
4.1 |
– |
4.1 |
1 |
50.8 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
69.9 |
R16 |
4.1 |
– |
4.1 |
1 1/4 |
60.3 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
79.5 |
R18 |
4.1 |
– |
4.1 |
1 1/2 |
68.3 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
90.4 |
R20 |
4.1 |
– |
4.1 |
2 |
82.6 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
108.0 |
R23 |
5.6 |
– |
4.8 |
2 1/2 |
101.6 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
127.0 |
R26 |
5.6 |
– |
4.8 |
3 |
123.8 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
146.1 |
R31 |
5.6 |
– |
4.8 |
3 1/2 |
131.8 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
158.8 |
R34 |
5.6 |
– |
4.8 |
4 |
149.2 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
174.8 |
R37 |
5.6 |
5.6 |
4.8 |
5 |
181.0 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
209.6 |
R41 |
5.6 |
5.6 |
4.8 |
6 |
211.2 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
241.3 |
R45 |
5.6 |
5.6 |
4.8 |
8 |
269.9 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
301.8 |
R49 |
5.6 |
5.6 |
4.8 |
10 |
323.9 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
355.6 |
R53 |
5.6 |
5.6 |
4.8 |
12 |
381.0 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
412.8 |
R57 |
5.6 |
5.6 |
4.8 |
14 |
419.1 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
457.2 |
R61 |
5.6 |
5.6 |
4.8 |
16 |
469.9 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
508.0 |
R65 |
5.6 |
5.6 |
4.8 |
18 |
533.4 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
574.8 |
R69 |
5.6 |
5.6 |
4.8 |
20 |
584.2 |
12.7 |
19.1 |
17.5 |
8.7 |
13.5 |
9.5 |
635.0 |
R73 |
5.6 |
5.6 |
4.8 |
24 |
692.2 |
15.9 |
22.2 |
20.7 |
10.5 |
16.7 |
11.1 |
749.3 |
R77 |
6.4 |
6.4 |
5.6 |
Class 900 Ring Type Joint Flange Dimensions
Nominal Pipe Size |
Pitch Diam. of Ring and Groove |
Width of Ring |
HEIGHT OF RING |
Width of Flat on Octagonal Rings |
Width of Groove |
Depth of Groove |
Diameter of Raised Face for Ring Joint or Lapped |
Ring Number |
Approximate Distande Between Flange of Ring Joints When Ring is Compressed |
|
OVal |
Octagonal |
|||||||||
P |
A |
B |
H |
C |
F |
E(L*) |
K(Min) |
|||
3 |
123.8 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
155.4 |
R31 |
4.1 |
4 |
149.2 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
180.8 |
R37 |
4.1 |
5 |
181.0 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
215.9 |
R41 |
4.1 |
6 |
211.2 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
241.3 |
R45 |
4.1 |
8 |
269.9 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
307.8 |
R49 |
4.1 |
10 |
323.9 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
362.0 |
R53 |
4.1 |
12 |
381.0 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
419.1 |
R57 |
4.1 |
14 |
419.1 |
15.9 |
22.2 |
20.7 |
10.5 |
16.7 |
11.1 |
466.9 |
R62 |
4.1 |
16 |
469.9 |
15.9 |
22.2 |
20.7 |
10.5 |
16.7 |
11.1 |
523.7 |
R66 |
4.1 |
18 |
533.4 |
19.1 |
25.4 |
23.8 |
11.1 |
19.8 |
12.7 |
593.9 |
R70 |
4.8 |
20 |
584.2 |
19.1 |
25.4 |
23.8 |
12.3 |
19.8 |
12.7 |
647.7 |
R74 |
4.8 |
24 |
692.2 |
25.4 |
33.4 |
31.8 |
17.3 |
27.0 |
15.9 |
771.7 |
R78 |
5.6 |
Class 1500 Ring Type Joint Flange Dimensions
Nominal Pipe Size |
Pitch Diam. of Ring and Groove |
Width of Ring |
HEIGHT OF RING |
Width of Flat on Octagonal Rings |
Width of Groove |
Depth of Groove |
Diameter of Raised Face for Ring Joint or Lapped |
Ring Number |
Approximate Distande Between Flange of Ring Joints When Ring is Compressed |
|
OVal |
Octagonal |
|||||||||
P |
A |
B |
H |
C |
F |
E(L*) |
K(Min) |
|||
1/2 |
39.7 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
60.5 |
R12 |
4.1 |
3/4 |
44.5 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
66.8 |
R14 |
4.1 |
1 |
50.8 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
71.4 |
R16 |
4.1 |
1 1/4 |
60.3 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
81.0 |
R18 |
4.1 |
1 1/2 |
68.3 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
92.2 |
R20 |
4.1 |
2 |
95.3 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
124.0 |
R24 |
3.0 |
2 1/2 |
108.0 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
136.7 |
R27 |
3.0 |
3 |
136.5 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
168.4 |
R35 |
3.0 |
4 |
161.9 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
193.8 |
R39 |
3.0 |
5 |
193.7 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
228.6 |
R44 |
3.0 |
6 |
211.2 |
12.7 |
19.1 |
17.5 |
8.7 |
13.5 |
9.5 |
247.7 |
R46 |
3.0 |
8 |
269.9 |
15.9 |
22.2 |
20.7 |
10.5 |
16.7 |
11.1 |
317.5 |
R50 |
4.1 |
10 |
323.9 |
15.9 |
22.2 |
20.7 |
10.5 |
16.7 |
11.1 |
371.6 |
R54 |
4.1 |
12 |
381.0 |
22.2 |
28.6 |
27.0 |
14.8 |
23.0 |
14.3 |
438.2 |
R58 |
4.8 |
14 |
419.1 |
25.4 |
33.4 |
31.8 |
17.3 |
27.0 |
15.9 |
489.0 |
R64 |
5.6 |
16 |
469.9 |
28.6 |
36.5 |
34.9 |
19.8 |
30.2 |
17.5 |
546.1 |
R67 |
7.9 |
18 |
533.4 |
28.6 |
36.5 |
34.9 |
19.8 |
30.2 |
17.5 |
612.9 |
R71 |
7.9 |
20 |
584.2 |
31.8 |
39.7 |
38.1 |
22.3 |
33.4 |
17.5 |
673.1 |
R75 |
9.7 |
24 |
692.2 |
34.9 |
44.5 |
41.3 |
24.8 |
36.5 |
20.6 |
793.8 |
R79 |
11.2 |
Class 2500 Ring Type Joint Flange Dimensions
Nominal Pipe Size |
Pitch Diam. of Ring and Groove |
Width of Ring |
HEIGHT OF RING |
Width of Flat on Octagonal Rings |
Width of Groove |
Depth of Groove |
Diameter of Raised Face for Ring Joint or Lapped |
Ring Number |
Approximate Distande Between Flange of Ring Joints When Ring is Compressed |
|
OVal |
Octagonal |
|||||||||
P |
A |
B |
H |
C |
F |
E(L*) |
K(Min) |
|||
1/2 |
42.9 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
65.0 |
R13 |
4.1 |
3/4 |
50.8 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
73.2 |
R16 |
4.1 |
1 |
60.3 |
8.0 |
14.3 |
12.7 |
5.2 |
8.7 |
6.4 |
82.6 |
R18 |
4.1 |
1 1/4 |
72.2 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
101.6 |
R21 |
3.0 |
1 1/2 |
82.6 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
114.3 |
R23 |
3.0 |
2 |
101.6 |
11.1 |
17.5 |
15.9 |
7.7 |
11.9 |
7.9 |
133.4 |
R26 |
3.0 |
2 1/2 |
111.1 |
12.7 |
19.1 |
17.5 |
8.7 |
13.5 |
9.5 |
149.4 |
R28 |
3.0 |
3 |
127.0 |
12.7 |
19.1 |
17.5 |
8.7 |
13.5 |
9.5 |
168.4 |
R32 |
3.0 |
4 |
157.2 |
15.9 |
22.2 |
20.7 |
10.5 |
16.7 |
11.1 |
203.2 |
R38 |
4.1 |
5 |
190.5 |
19.1 |
25.4 |
23.8 |
12.3 |
19.8 |
12.7 |
241.3 |
R42 |
4.1 |
6 |
228.6 |
19.1 |
25.4 |
23.8 |
12.3 |
19.8 |
12.7 |
279.4 |
R47 |
4.1 |
8 |
279.4 |
22.2 |
28.6 |
27.0 |
14.8 |
23.0 |
14.3 |
339.9 |
R51 |
4.8 |
10 |
342.9 |
28.6 |
36.5 |
34.9 |
19.8 |
30.2 |
17.5 |
425.5 |
R55 |
6.4 |
12 |
406.4 |
31.8 |
39.7 |
38.1 |
22.3 |
33.4 |
17.5 |
495.3 |
R60 |
7.9 |
Ring Type Joint Flange Pressure Ratings
| Flanges pressure rating in psig for RTJ Ring Type Joint Flange ASME |
|||||||
| Temperature (F°) | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
| -20 to 100 | 285 | 740 | 985 | 1480 | 2220 | 3705 | 6170 |
| 200 | 260 | 680 | 905 | 1360 | 2035 | 3395 | 5655 |
| 300 | 230 | 655 | 870 | 1310 | 1965 | 3270 | 5450 |
| 400 | 200 | 635 | 845 | 1265 | 1900 | 3170 | 5280 |
| 500 | 170 | 605 | 805 | 1205 | 1810 | 3015 | 5025 |
| 600 | 140 | 570 | 755 | 1135 | 1705 | 2840 | 4730 |
| 650 | 125 | 550 | 730 | 1100 | 1650 | 2745 | 4575 |
| 700 | 110 | 530 | 710 | 1060 | 1590 | 2655 | 4425 |
| 750 | 95 | 505 | 675 | 1015 | 1520 | 2535 | 4230 |
| 800 | 80 | 410 | 550 | 825 | 1235 | 2055 | 3430 |
| 850 | 65 | 320 | 425 | 640 | 955 | 1595 | 2655 |
| 900 | 50 | 230 | 305 | 460 | 690 | 1150 | 1915 |
| 950 | 35 | 135 | 185 | 275 | 410 | 685 | 1145 |
| 1000 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
Types of Ring Type Joint Flanges
| ANSI B16.5 Ring Type Joint Flanges | Raised Face Ring Type joint Flange |
| RTJ Ring Type joint Flange | ASME B16.5 RTJ Flange Dimensions |
| ASME B16.5 Ring Type Joint Flanges | ANSI B16.5 Class 150 Ring Type joint Flanges |
| Class 150 Ring Type Joint Flanges | Flat Face Ring Type joint flange |
| Ring Type Joint Flange class 900 | Ring Type joint Flange Class 600 |
| ANSI B16.5 class 300 Ring Type Joint Flange | ANSI 150 Ring Type joint Flange |
| Slip On Ring Type joint flange | High Quality Ring Type joint Flanges |
| Weld Neck Ring Type joint | ANSI Ring Type Joint Flange |
| Ring Type joint Blind Flange | DIN Ring Type joint Flanges |
ASME B16.5 Ring Type joint Flange Price List
Raised Face Ring Type joint Flange Price: $22.45 / each
ANSI B16.5 Ring Type joint Flange Price: $25.14 / each
RTJ Flange Price: $20.35 / each
RTJ Flange Applications
ASME B16.5 Ring Type Joint flanges are typically used in high pressure (Class 600 and higher rating) and/or high temperature services above 800°F (427°C). RTJ Flange have grooves cut into their faces which steel ring gaskets. Raised Face RTJ flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming (or Coining) the gasket to make intimate contact inside the grooves, creating a metal to metal seal.
ASME/ANSI B16.5 Ring Type joint Flange Supplying to Following Regions & Countries:
| AFRICA Nigeria Algeria Angola Tanzania Libya Egypt Sudan Equatorial Guinea The Republic Of Congo Gabon NORTH AMERICA Usa Canada Mexico Costa Rica Trinidad And Tobago Jamaica Denmark |
MIDDLE EAST ASIA Saudi Arabia Iran Iraq Uae Qatar Bahrain Oman Kuwait Turkey Jordan SOUTH AMERICA Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay |
EUROPE Norway Germany France Italy Uk Spain Netherland Belgium Greece Czech Republic Portugal Hungary SOUTH AFRICA |
ASIA India Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanmar Taiwan Cambodia |
